Important Safety Information
Secure the nightstand against the wall with the included anti-tip kit. Strictly follow the instructions for the assembly of the nightstand. Do not overload the nightstand as it may tip over.
Product Overview
The HOOBRO BB190UDBZ01 Nightstand is a versatile bedside or end table featuring a built-in charging station, customizable LED lighting, and ample storage. Its design integrates modern functionality with practical storage solutions for various living spaces.
Package Contents
Before assembly, ensure all components listed below are present and undamaged. If any parts are missing or damaged, please contact customer support.
- Nightstand Frame (Metal)
- Tabletop (Engineered Wood)
- Shelves (Engineered Wood)
- 4 Non-Woven Fabric Drawers
- Charging Station (1 USB port, 1 Type-C port, 2 AC sockets)
- LED Light Strip
- Remote Control for LED Light Strip
- Anti-Tip Kit
- Accessory Kit (Screws, bolts, wrench, etc.)
- Assembly Instructions (This manual)
Setup and Assembly
Follow these step-by-step instructions to assemble your HOOBRO BB190UDBZ01 Nightstand. A wrench is recommended for assembly, and all necessary tools are included in the accessory kit.
- Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent scratches. Verify all parts are present against the package contents list.
- Assemble the Metal Frame: Connect the metal frame pieces using the provided screws and the included wrench. Ensure all connections are secure but do not overtighten until the frame is fully assembled.
- Install Shelves: Place the engineered wood shelves into the designated slots within the metal frame. Secure them with the appropriate fasteners from the accessory kit.
- Attach Charging Station: Integrate the charging station into the pre-cut opening on the tabletop. Ensure it is flush and securely fastened.
- Install LED Light Strip: Peel off the adhesive backing from the LED light strip and carefully attach it to the underside of the top shelf or within the open compartment, as desired. Connect the light strip to the charging station's power source.
- Assemble Fabric Drawers: Fold the non-woven fabric drawers into shape. Insert the bottom panel to provide structure. Attach the wooden handles to the front of each drawer.
- Insert Drawers: Slide the assembled fabric drawers into their respective compartments in the nightstand frame.
- Attach Anti-Tip Kit: For safety, secure the nightstand to a wall using the provided anti-tip kit. Follow the specific instructions included with the kit to prevent accidental tipping.
Operating Instructions
Charging Station
The integrated charging station provides convenient power access for your devices.
- AC Outlets: Two 120V/12A AC sockets are available for standard electrical devices.
- USB Ports: One USB port (5V/2A) and one Type-C port (5V/2A) are provided for charging smartphones, tablets, and other USB-powered devices.
- Simply plug your device's charging cable into the appropriate port on the charging station.
LED Light Strip
The LED light strip offers customizable illumination to enhance your room's ambiance.
- Power On/Off: Use the remote control or the button on the charging station to turn the LED lights on or off.
- Color Selection: The light strip offers 20 different colors. Use the remote control to select your preferred color.
- Lighting Modes: Choose from 21 dynamic lighting modes to suit various activities like reading, relaxing, or as a night light.
- Brightness Adjustment: Adjust the brightness levels using the remote control.
Video 1: A short demonstration of the HOOBRO Nightstand's LED light strip changing colors and the integrated charging station in use.
Video 2: A brief overview of the HOOBRO Nightstand's features, including the LED lighting and charging capabilities, shown with the Rustic Brown + Black variant.
Maintenance
- Cleaning: Wipe the surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners that could damage the finish.
- Drawer Care: The non-woven fabric drawers can be spot cleaned with a mild detergent and air-dried.
- Cable Management: Regularly check and organize cables to prevent tangling and damage.
- Stability Check: Periodically check all screws and fasteners to ensure they remain tight. Re-tighten if necessary.
Troubleshooting
- LED Light Not Working:
- Ensure the power cord is securely plugged into a working wall outlet.
- Check if the LED light strip is properly connected to the charging station.
- Verify the remote control batteries are functional.
- Devices Not Charging:
- Confirm the nightstand's main power cord is plugged in.
- Ensure the device's charging cable is fully inserted into the USB/Type-C port or AC socket.
- Test the charging station with a different device or cable to rule out device/cable issues.
- Nightstand Wobbles:
- Check that all assembly screws are tightened.
- Ensure the adjustable feet (if present) are properly leveled on uneven floors.
- Verify the anti-tip kit is correctly installed and secured to the wall.
Specifications
| Feature | Detail |
|---|---|
| Brand | HOOBRO |
| Model Number | BB190UDBZ01 |
| Product Dimensions (D x W x H) | 11.8"D x 23.6"W x 23.6"H |
| Item Weight | 7.2 Kilograms |
| Frame Material | Metal |
| Top Material | Engineered Wood |
| Drawer Material | Non-Woven Fabric |
| Number of Drawers | 4 |
| Charging Station | 1 USB Port, 1 Type-C Port, 2 AC Sockets |
| LED Light Strip | 20 Colors, 21 Lighting Modes |
| Color | Black |
| Indoor/Outdoor Usage | Indoor |
Warranty and Support
Specific warranty details for the HOOBRO BB190UDBZ01 Nightstand are not provided in this manual. Please refer to the product packaging or the manufacturer's official website for the most up-to-date warranty information.
For customer support, technical assistance, or to report missing/damaged parts, please contact HOOBRO customer service through their official channels. Contact information can typically be found on the product packaging or their brand store on Amazon.
