Introduction
The JBL Horizon 3 is a versatile radio alarm clock designed to enhance your daily routine. It features clear digital audio via DAB/DAB+/FM radio and Bluetooth connectivity for streaming from smart devices. Key functions include a sunrise simulation alarm, customizable sleep mode with natural sounds, and internal memory for favorite stations. Its portable design makes it suitable for various environments, from bedside tables to outdoor settings, delivering powerful and clear JBL sound.
This manual provides essential information for setting up, operating, and maintaining your JBL Horizon 3 to ensure optimal performance and longevity.
Setup
1. Unpacking and Placement
- Carefully remove all components from the packaging.
- Place the JBL Horizon 3 on a stable, flat surface. Ensure adequate ventilation around the unit.
- For optimal radio reception, extend the spiral antenna fully.
Figure 1: Front view of the JBL Horizon 3, displaying the time and alarm status on its digital screen.
2. Power Connection
- Connect the provided power cable to the power input port on the back of the unit.
- Plug the other end of the power cable into a wall outlet.
- The device will power on automatically or can be turned on using the power button.
Figure 2: Bottom view of the JBL Horizon 3, illustrating the power connection point and the battery compartment.
3. Initial Setup (Time and Date)
- Upon first power-on, the device may prompt you to set the time and date. Follow the on-screen instructions.
- Alternatively, use the JBL ONE application for easier configuration.
Operating Instructions
1. Controls Overview
Figure 3: Top view of the JBL Horizon 3, highlighting the main controls including the rotary dial, function buttons, and alarm presets.
- Rotary Dial: Used for adjusting volume, navigating menus, and setting time/alarms.
- Power Button: Turns the unit on/off.
- Bluetooth Button: Activates Bluetooth pairing mode.
- Radio Button (DAB/FM): Toggles between DAB and FM radio modes.
- Ambient Light Button: Controls the ambient light settings.
- Alarm Presets (1, 2, 3): Quick access to saved alarm settings.
2. Radio Operation (DAB/DAB+/FM)
- Press the Radio button to switch between DAB/DAB+ and FM modes.
- In DAB mode, the device will automatically scan for available stations. Use the rotary dial to browse.
- In FM mode, use the rotary dial to tune to a specific frequency or press the scan buttons to find the next available station.
- To save a favorite station, long-press one of the numbered preset buttons (1-3).
3. Bluetooth Streaming
- Press the Bluetooth button to enter pairing mode. The display will show "Pairing".
- On your smart device, enable Bluetooth and select "JBL Horizon 3" from the list of available devices.
- Once connected, you can stream audio from your device to the JBL Horizon 3.
4. Alarm Settings
- Press one of the Alarm Preset buttons (1-3) to configure an alarm.
- Use the rotary dial to set the alarm time, alarm source (radio, natural sound, Bluetooth), and volume.
- Enable the sunrise simulation feature for a gradual wake-up experience.
- To snooze, press the rotary dial when the alarm sounds.
5. Sleep Mode and Ambient Light
- Activate sleep mode to fall asleep to soothing natural sounds or a chosen radio station.
- Use the Ambient Light button to adjust the color and brightness of the integrated LED light.
- Further customization of sleep sounds and ambient light is available through the JBL ONE application.
Maintenance
- Cleaning: Use a soft, dry cloth to clean the surface of the device. Do not use abrasive cleaners or solvents.
- Storage: When not in use for extended periods, store the device in a cool, dry place.
- Battery Care: If the device uses an optional battery, ensure it is charged regularly to maintain its lifespan.
Troubleshooting
- No Power: Ensure the power cable is securely connected to both the device and the wall outlet. Check if the outlet is functional.
- Poor Radio Reception: Fully extend the spiral antenna. Try repositioning the unit to improve signal strength. Perform a new station scan.
- Bluetooth Pairing Issues: Ensure Bluetooth is enabled on your smart device and the JBL Horizon 3 is in pairing mode. Move your device closer to the Horizon 3.
- Alarm Not Sounding: Verify that the alarm is enabled and the volume is set to an audible level. Check the alarm time.
- Display Too Bright/Dim: Adjust the display brightness settings via the device controls or the JBL ONE application.
Specifications
| Feature | Detail |
|---|---|
| Product Dimensions (L x W x H) | 22.5 x 3.81 x 14.2 cm |
| Weight | 780 grams |
| Brand | JBL |
| Model Number | Horizon 3 |
| Color | Grey |
| Display Type | Digital |
| Special Features | Display, USB Port, LED Light |
| Power Source | Corded Electric (with optional battery) |
| Indoor/Outdoor Use | Indoor |
| Material | Plastic, Metal (frame) |
| Batteries Required | Yes |
| Included Components | 1 JBL Horizon 3 unit, 1 spiral antenna, 1 warranty card and safety instructions, 1 quick start guide, Power cables (up to 4 cables depending on regional SKUs) |
Warranty and Support
Warranty Information
The JBL Horizon 3 comes with a 2-year warranty. Please refer to the included warranty card and safety instructions for detailed terms and conditions.
Customer Support
For further assistance, technical support, or warranty claims, please visit the official JBL support website or contact their customer service. Contact information can typically be found in the included documentation or on the JBL brand website.
