Perlegear Universal Swivel TV Stand with LED Lights (Model PGTVS32B)

1. Introduction

This manual provides comprehensive instructions for the assembly, operation, and maintenance of your Perlegear Universal Swivel TV Stand with LED Lights, Model PGTVS32B. This stand is designed to accommodate 32-70 inch flat-panel LCD/LED TVs, offering height adjustment, swivel, and tilt functionalities, along with integrated LED lighting.

Please read this manual thoroughly before installation and use to ensure safe and correct operation.

2. Safety Information

WARNING:

• Do not exceed the maximum weight capacity of 88 lbs (40 kg). Exceeding this limit may result in serious injury or property damage.
• Ensure your TV's VESA pattern is compatible with the stand (100x100mm to 400x400mm).
• Always use two people to lift and position the TV during installation.
• Verify that all screws are securely tightened before use. Do not overtighten screws.
• Keep children and pets away from the assembly area. Small parts can be a choking hazard.
• Do not modify the product or use it for purposes other than its intended design.

3. Package Contents

Please check to ensure all components are present and undamaged. If any parts are missing or defective, contact customer support.

Image 1: Overview of the Perlegear Universal Swivel TV Stand with LED lights, remote control, and smartphone app interface. This image displays the main components of the TV stand, including the base, support column, TV mounting bracket, and LED light strips.

Typical package contents include:

• Tempered Glass Base
• Support Column
• TV Mounting Bracket (VESA plate)
• TV Brackets (vertical arms)
• LED Light Strips with Controller
• Remote Control for LED Lights
• Assembly Hardware (various screws, washers, spacers)
• Tools (e.g., Allen wrench)
• Instruction Manual

4. Setup and Assembly

Follow these steps carefully for proper assembly. It is recommended to have two people for installation.

4.1 Compatibility Check

Before assembly, ensure your TV meets the following criteria:

• TV Size: 32 to 70 inches
• Weight Capacity: Maximum 88 lbs (40 kg)
• VESA Pattern: Compatible with VESA patterns from 100x100mm to 400x400mm. Common patterns include:
  • 100x100mm
  • 100x200mm
  • 200x100mm
  • 200x200mm
  • 200x300mm
  • 300x200mm
  • 300x300mm
  • 400x200mm
  • 400x300mm
  • 400x400mm

Image 2: Diagram illustrating wide TV compatibility, showing a TV screen with dimensions 24"-60" (note: product description states 32"-70") and a list of supported VESA patterns and a maximum weight capacity of 99 lbs (note: product description states 88 lbs). Please refer to the product description for the most accurate specifications.

Image 3: Visual representation of the TV stand's universal fit for TVs ranging from 32 to 70 inches, highlighting VESA compatibility up to 400x400mm and a maximum weight capacity of 88 lbs.

4.2 Base Assembly

1. Attach the support column to the tempered glass base using the provided screws and tools. Ensure the column is securely fastened and aligned.
2. Place the non-slip pads on the bottom of the tempered glass base to prevent scratching surfaces and ensure stability.

4.3 Attaching TV Mounting Bracket

1. Secure the TV mounting bracket (VESA plate) to the support column. This bracket allows for height adjustment.
2. Choose one of the three installation positions on the column for the desired initial height.

4.4 Attaching TV Brackets to TV

1. Identify the correct screws, washers, and spacers for your TV's VESA mounting holes.
2. Attach the two vertical TV brackets to the back of your TV. Ensure they are level and securely tightened.
3. The TV brackets offer three height choices, allowing for fine-tuning of the TV's vertical position.

4.5 Mounting TV to Stand

1. With assistance, carefully lift your TV and hook the TV brackets onto the TV mounting bracket (VESA plate) on the stand.
2. Engage the security locks on the TV brackets to prevent accidental dislodgement.
3. Adjust the height as needed (refer to Section 5.1 for height adjustment).

4.6 LED Light Installation

1. Attach the LED light strips to the back of your TV or the stand's column using their adhesive backing.
2. Connect the LED light strips to the provided controller.
3. Plug the controller into a power source.

5. Operating Instructions

5.1 Height Adjustment

The stand offers 9 levels of height adjustment. This is achieved by combining the 3 installation positions on the main column and the 3 height choices on the TV brackets. The screen center height can be adjusted up to 24.6 inches.

Image 4: Illustration demonstrating the 8 (note: product description states 9) height configurations available with the TV stand, showing how the TV can be positioned at different vertical levels.

5.2 Swivel and Tilt Functionality

The TV stand allows for optimal viewing angles:

• Swivel: The TV can swivel +/-30 degrees horizontally, providing a total viewing range of 60 degrees. Gently rotate the TV to the desired angle.
• Tilt: The TV can be tilted up by 8 degrees to reduce glare and improve viewing comfort. Adjust the tilt mechanism on the TV mounting bracket.

Image 5: Depiction of the TV stand's swivel capability, showing a TV swiveling +/-50 degrees (note: product description states +/-30 degrees) to provide a wider viewing range in a living room setting.

Image 6: An image illustrating the flexibility of the TV stand, featuring a TV swiveling +/-30 degrees and tilting up 8 degrees, shown in a home gym environment.

5.3 LED Lighting Control

The integrated LED lights offer a range of customization options:

• Color Selection: Choose from 16.8 million RGB colors.
• Lighting Effects: Select various dynamic lighting effects.
• Effect Speed: Adjust the speed of dynamic effects.
• Brightness: Control the intensity of the lights.
• Music Sync Mode: Lights can synchronize with music, reacting to the beat.

Control methods:

• Smartphone App: Download the dedicated app to control all features.
• Remote Control: Use the included IR remote for convenient control.
• In-line Remote: A physical button controller on the LED strip cable provides basic control.

Image 7: Display of the LED lighting's custom color and effect capabilities, along with the three control methods: smartphone app, remote control, and in-line switch.

Image 8: An image demonstrating the dynamic light sync feature, where the LED lights change in rhythm with music, creating an immersive entertainment experience.

6. Maintenance

• Cleaning: Use a soft, dry cloth to clean the stand. For the glass base, a mild glass cleaner can be used. Avoid abrasive cleaners or solvents.
• Inspection: Periodically check all screws and connections to ensure they remain tight. Retighten if necessary.
• LED Lights: Ensure the LED strips and controller are free from dust and moisture.

7. Troubleshooting

8. Specifications

• Model: PGTVS32B
• Brand: PERLESMITH
• Compatible TV Sizes: 32 - 70 inches
• Maximum Weight Capacity: 88 lbs (40 kg)
• VESA Compatibility: 100x100mm, 100x200mm, 200x100mm, 200x200mm, 200x300mm, 300x200mm, 300x300mm, 400x200mm, 400x300mm, 400x400mm
• Swivel Range: +/-30 degrees (total 60 degrees)
• Tilt Range: Up 8 degrees
• Height Adjustment: 9 levels (18" to 24.5" from base to screen center)
• Base Material: Tempered Glass
• LED Lighting: RGB, 16.8 million colors, various effects, music sync, app/remote/in-line control.

9. Warranty and Support

For warranty information, technical support, or to order replacement parts, please refer to the documentation included with your purchase or visit the official PERLESMITH website. Keep your purchase receipt as proof of purchase.

PERLESMITH Official Website: Visit PERLESMITH Store on Amazon