Skagen Signatur Minimalist Men's Watch User Manual

1. Product Overview

The Skagen Signatur Minimalist Men's Watch is designed with a modern, minimalist aesthetic, featuring a durable stainless steel case and a versatile band. This timepiece is equipped with an accurate quartz movement and a multifunction analog display, offering both style and reliability.

Key features include a 40mm case, 20mm band width, scratch-resistant mineral crystal, and water resistance up to 50 meters (165 feet).

2. Setup

2.1 Setting the Time

1. Locate the crown on the right side of the watch case.
2. Gently pull the crown outwards to the first or second click position (depending on the model, one click for time, two clicks for date if applicable).
3. Rotate the crown clockwise or counter-clockwise to adjust the hour and minute hands to the correct time.
4. Once the time is set, push the crown back into its original position to engage the movement and start the watch.

2.2 Adjusting the Band

The watch features a genuine leather band designed for a customized fit. The band is self-adjustable and includes a quick-release mechanism for easy interchangeability.

• To adjust the length, use the buckle to select the appropriate hole for your wrist size.
• To remove or replace the band, locate the small lever or pin on the underside of the band where it connects to the watch case. Slide this lever to release the spring bar and detach the band.

Image: Close-up of the watch's brown leather band and buckle, showing the Skagen logo on the clasp. This illustrates the band's design and attachment point.

Image: Side view of the Skagen watch, highlighting the slim profile of the case and the position of the crown for time adjustment.

3. Operating the Watch

3.1 Water Resistance

This watch is water resistant up to 50 meters (165 feet), or 5 ATM. This rating means it is suitable for short periods of recreational swimming and showering. It is not recommended for diving or snorkeling. Avoid operating the crown or pushers while the watch is wet to prevent water intrusion.

Image: The watch face in low light, demonstrating the luminous properties of the dial markers and hands for visibility in the dark.

4. Maintenance

4.1 Cleaning Your Watch

To maintain the appearance of your Skagen watch, regularly wipe the case and crystal with a soft, dry cloth. For leather bands, avoid prolonged exposure to water and direct sunlight to prevent damage and discoloration. For stainless steel bands, a damp cloth can be used, followed by a dry cloth.

4.2 Battery Replacement

The watch operates on a standard SR621 battery. When the battery needs replacement, it is recommended to take your watch to a professional watchmaker or an authorized service center. Attempting to replace the battery yourself may damage the watch or compromise its water resistance, as the case back can be difficult to re-seat properly without specialized tools.

5. Troubleshooting

5.1 Watch Not Keeping Accurate Time

• Check the Crown: Ensure the crown is fully pushed in. If it is pulled out even slightly, the watch will not run or keep accurate time.
• Battery Life: If the watch is losing time or stops completely, the battery may need to be replaced. Refer to section 4.2 for battery replacement instructions.
• Impact Damage: If the watch has experienced a significant impact, the internal movement may be affected. In such cases, professional inspection and repair are recommended.

6. Specifications

7. Warranty and Support

For warranty information, service, or additional support, please refer to the official Skagen website or contact Skagen customer service directly. Keep your proof of purchase for any warranty claims.