Introduction
The Tivoli Audio Model One Bluetooth AM/FM Radio is designed for high-quality sound reproduction and reliable reception. It features a handmade wood cabinet that serves as an acoustically inert housing, contributing to its distinct sound profile. This radio combines traditional AM/FM tuning with modern Bluetooth connectivity and an auxiliary input for versatile audio playback.
Front view of the Tivoli Audio Model One Bluetooth AM/FM Radio, showcasing its speaker, control knobs, and tuning dial.
Key Features:
- Handmade Wood Cabinet: Provides an acoustically inert housing for enhanced sound quality.
- Natural Sound Reproduction: Delivers musically accurate tonal balance and bass response.
- Intuitive Controls: Features a single knob for power and source selection, a volume knob, and a precise tuning dial.
- Multiple Audio Sources: Supports AM/FM radio, Bluetooth streaming, and auxiliary input.
- Headphone Port: For private listening.
Setup
- Unpacking: Carefully remove the radio and all accessories from the packaging.
- Power Connection: Connect the provided power cord to the 12VDC input on the rear of the radio and then to a wall outlet.
- Antenna Connection:
- FM Antenna: The radio includes an internal FM antenna. For improved FM reception, connect an external 75 Ohm FM antenna to the F-connector on the rear panel and set the internal/external switch accordingly.
- AM Antenna: The radio has a built-in AM antenna. For improved AM reception, an external AM antenna can be connected to the designated terminals on the rear panel.
- Placement: Place the radio on a stable, flat surface. For optimal reception, avoid placing it near large metal objects or other electronic devices that may cause interference.
Rear panel of the radio, illustrating connections for power, external antennas, auxiliary input, and headphone output.
Operating Instructions
1. Power and Source Selection
Use the top-left knob to turn the radio ON/OFF and select your desired audio source: FM, AM, Bluetooth (BT), or Auxiliary (AUX).
2. Volume Control
Adjust the audio output level using the top-right knob. Turn clockwise to increase volume and counter-clockwise to decrease.
3. AM/FM Radio Operation
- Select Source: Turn the source knob to "FM" or "AM".
- Tune Station: Use the large tuning dial on the right to select your desired radio station. The tuning indicator light will illuminate brightly when the best reception is achieved for a station.
- Adjust Volume: Use the volume knob to set the listening level.
Close-up of the radio's front panel, showing the power/source knob, volume knob, and large tuning dial.
4. Bluetooth Operation
- Select Source: Turn the source knob to "BT". The Bluetooth indicator light will begin to flash, indicating pairing mode.
- Pair Device: On your Bluetooth-enabled device (e.g., smartphone, tablet), enable Bluetooth and search for "Tivoli Audio Model One BT". Select it to pair. Once paired, the indicator light will glow solid.
- Play Audio: Begin playing audio from your device. Control playback and initial volume from your device, then fine-tune with the radio's volume knob.
5. Auxiliary Input Operation
- Connect Device: Plug a 3.5mm audio cable from your external audio device (e.g., MP3 player, CD player) into the "AUX IN" jack on the rear of the radio.
- Select Source: Turn the source knob to "AUX".
- Play Audio: Start playback on your external device. Adjust volume using both the device's volume control and the radio's volume knob.
6. Headphone Use
For private listening, plug standard 3.5mm headphones into the headphone jack on the rear panel. The internal speaker will automatically mute.
Maintenance
- Cleaning: Use a soft, dry cloth to clean the radio's cabinet and front panel. Avoid abrasive cleaners or solvents.
- Dusting: Regularly dust the unit to prevent accumulation, especially around the speaker grille and control knobs.
- Placement: Keep the radio away from direct sunlight, heat sources, and moisture. Ensure adequate ventilation around the unit.
- Antenna Care: Handle external antennas carefully to prevent damage.
Troubleshooting
| Problem | Solution |
|---|---|
| No power | Ensure the power cord is securely connected to both the radio and a working wall outlet. Check if the power switch is in the ON position. |
| Poor AM/FM reception | Adjust the position of the radio or the external antenna (if connected). Ensure the internal/external antenna switch is set correctly. Move the radio away from other electronic devices that may cause interference. |
| Bluetooth device not pairing | Ensure the radio's source knob is set to "BT" and the Bluetooth indicator light is flashing. Make sure Bluetooth is enabled on your device and it is within range (typically 10 meters). Try restarting both the radio and your Bluetooth device. |
| No sound from auxiliary input | Verify the audio cable is securely connected to both the radio's "AUX IN" jack and your external device. Ensure the radio's source knob is set to "AUX". Check the volume levels on both the radio and the external device. |
| Distorted sound | Reduce the volume on both the radio and the source device. Ensure the radio is not placed too close to other electronics causing interference. |
Specifications
| Feature | Detail |
|---|---|
| Brand | Tivoli Audio |
| Model Number | TIV-M1BT-BLU |
| Product Dimensions | 8.38"L x 4.5"W x 5.25"H |
| Item Weight | 5.46 pounds |
| Color | Navy Blue |
| Connectivity Technology | Bluetooth |
| Tuner Technology | AM/FM |
| Power Source | Corded Electric (12VDC, 800mA) |
| Included Components | Owner's Manual |
Warranty and Support
Tivoli Audio products are manufactured to high standards. For warranty information and customer support, please refer to the official Tivoli Audio website or contact their customer service directly.
Manufacturer: Tivoli Audio
Contact Information:
- Phone: 1-877-297-9479
- Email: info@tivoliaudio.com
- Address: One Broadway, Suite 600, Cambridge, Massachusetts 02142 USA
Please retain your proof of purchase for warranty claims.