1. Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your LUMOBELL 2-Wired Video Doorbell Intercom System. This system features a 1080P HD camera, a 7-inch touch screen monitor, night vision capabilities, and remote access via the Tuya Smart App. Please read this manual thoroughly before installation and use to ensure proper functionality and safety.
2. Package Contents
Verify that all items listed below are included in your package. If any items are missing or damaged, please contact customer support.
Image 2.1: Overview of the LUMOBELL 2-Wired Video Doorbell Intercom System components, including the outdoor doorbell unit, indoor 7-inch monitor, RFID keycards, a MicroSD card, and a smartphone displaying the Tuya app interface.
- Outdoor Doorbell Unit (1)
- Indoor 7-inch Touch Screen Monitor (1)
- RFID Keycards (5)
- MicroSD Card (32GB pre-installed or included)
- Mounting Brackets and Screws
- Connection Cables
- Power Adapter
- User Manual (this document)
3. Safety Information
- Electrical Safety: Installation involves electrical wiring. If you are not comfortable with electrical work, consult a qualified electrician. Ensure power is disconnected before installation.
- Water Resistance: The outdoor unit is IP65-rated weatherproof. Ensure all connections are properly sealed during installation to maintain water resistance.
- Operating Temperature: Do not expose the device to extreme temperatures outside the specified operating range (-25°C to +50°C).
- Cable Management: Route cables safely to prevent tripping hazards or damage.
4. Setup and Installation
4.1 Installation Overview
The LUMOBELL system is a 2-wired setup, meaning the outdoor doorbell unit and indoor monitor are physically connected via a cable. This system can utilize existing doorbell wiring for easier upgrades.
Image 4.1: Visual guide for installing the outdoor doorbell unit and the indoor monitor. This includes drilling, mounting brackets, connecting wires, and securing the units.
4.2 Wiring Diagram
Carefully follow the wiring diagram for correct connection of the doorbell unit, monitor, and any optional access control devices (door switch, garage opener).
Image 4.2: Comprehensive wiring diagram illustrating connections for the outdoor doorbell, indoor monitor, power supply (24V 1A or DIN rail), door lock, gate, and door exit button. It also shows recommended wire distances based on cable type.
- Power Supply: Connect the system to a 24V 1A power supply.
- Doorbell to Monitor: Use the provided 2-core RVV cable (0.3mm² recommended for up to 100m, 0.5mm² for 120m, 0.75mm² for 150m).
- Access Control: Connect door switches, door locks, and garage door openers to the designated terminals on the outdoor unit as per the diagram.
4.3 App Installation and Pairing
The system integrates with the Tuya Smart or Smart Life application for remote functionality.
- Download the Tuya Smart or Smart Life app from the Google Play Store or Apple App Store.
- Register or log in to your account.
- Follow the in-app instructions to add your LUMOBELL Video Doorbell Intercom System. Ensure your smartphone is connected to a 2.4GHz Wi-Fi network during pairing.
Image 4.3: Illustration of the Tuya Smart and Smart Life app integration, showing how multiple family members can be added to manage access and receive notifications for the doorbell system.
5. Operating Instructions
5.1 Answering Visitors
When a visitor presses the doorbell button:
- The indoor monitor will display a live video feed and ring.
- Your smartphone will receive a live app call via the Tuya Smart app.
- You can communicate with the visitor using the two-way audio feature on either the monitor or the app.
Image 5.1: Demonstrates how to welcome visitors. When the doorbell rings, the indoor monitor automatically lights up with a clear live view, and the Tuya app on a smartphone receives a call, allowing for two-way communication.
5.2 Access Control
The system offers multiple methods for granting access:
- Indoor Monitor: Tap the unlock icon on the 7-inch touch screen.
- Tuya Smart App: Remotely unlock the door or gate from anywhere using the app.
- RFID Keycard: Tap a registered 13.56MHz RFID keycard on the outdoor doorbell unit to unlock. Hold for 3 seconds to open a connected garage door.
Image 5.2: Illustrates various ways to manage door access: swiping an RFID keycard, unlocking via the indoor monitor, and opening the door using the Tuya App on a smartphone.
5.3 Motion Detection and Recording
The doorbell features smart human motion detection and automatic recording.
- Motion Detection: The system can detect human motion and send alerts to your phone. You can customize detection zones and sensitivity in the app.
- Auto Snapshot & Recording: When the doorbell is pressed or motion is detected, the system automatically captures photos or records video clips.
- Local Storage: Recordings are saved to the MicroSD card (up to 512GB supported).
- Night Vision: Infrared night vision ensures clear footage even in low-light conditions up to 10 meters.
Image 5.3: Shows the smart human motion detection feature with customizable detection zones (T1, T2, T3, T4) to reduce unwanted alarms. Various motion trigger types are also depicted, including human activity, pet activity, insect activity, moving curtains, and vehicle movement.
Image 5.4: A comparison illustrating the clear visibility provided by the camera during the day and its effective infrared night vision capabilities in low-light conditions.
5.4 System Settings
Adjust various settings through the indoor monitor's touch screen or the Tuya Smart app.
- Volume Control: Adjust ringtone and intercom volumes.
- Ringtone Selection: Choose from available ringtones.
- Do Not Disturb: Set specific time periods for silent operation.
- Lock/Gate Closing Time: Configure the duration for which locks or gates remain open.
- RFID Badge Management: Assign different permissions to RFID badges for various users.
Image 5.5: Displays the indoor monitor's interface showing weather and time, along with options to adjust volumes and ringtone. It also illustrates how RFID badges can be set up with different access permissions for various users.
6. Maintenance
- Cleaning: Use a soft, damp cloth to clean the outdoor unit and indoor monitor. Avoid abrasive cleaners or solvents.
- Weather Protection: While the outdoor unit is weatherproof (IP65), ensure the rain hood is properly installed to provide additional protection against direct heavy rain or snow.
- Firmware Updates: Periodically check the Tuya Smart app for available firmware updates to ensure optimal performance and security.
- MicroSD Card: Regularly back up important recordings and format the MicroSD card to maintain recording efficiency.
Image 6.1: Highlights the weatherproof design of the outdoor doorbell unit, showing its resilience against sun, rain, and snow. It also illustrates the mounting bracket for secure installation.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No power to monitor/doorbell. | Loose connection, power adapter failure, no power at outlet. | Check all wiring connections. Ensure power adapter is securely plugged in. Test the power outlet. |
| No video/audio from doorbell. | Wiring issue, camera obstruction, monitor settings. | Verify doorbell-to-monitor wiring. Clear any obstructions from the camera lens. Check monitor display settings. |
| App notifications delayed or not received. | Poor Wi-Fi signal, app permissions, phone settings. | Ensure strong 2.4GHz Wi-Fi signal. Check app notification permissions on your smartphone. Disable battery optimization for the app. |
| Remote unlock not working. | Incorrect wiring to lock, power issue, app connectivity. | Review wiring diagram for lock connections. Ensure sufficient power supply to the lock. Check app connectivity. |
| RFID keycard not recognized. | Keycard not registered, incorrect placement. | Ensure the RFID keycard is properly registered with the system. Place the keycard directly over the RFID reader area on the doorbell unit. |
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | 2W_KW06_IP7 |
| Indoor/Outdoor Usage | Outdoor (Doorbell Unit), Indoor (Monitor) |
| Power Source | Corded Electric (24V) |
| Connectivity | 2-Wired Intercom, Wi-Fi (2.4GHz) |
| Video Capture Resolution | 1080p (1920x1080) |
| Viewing Angle | 130 Degrees |
| Night Vision Range | 10 Meters (Infrared LED) |
| Frame Rate | 30fps |
| Material | Aluminum, Plastic |
| Water Resistance Level | IP65 (Weather Resistant) |
| Flash Memory Type | Micro SD (32GB installed, supports up to 512GB) |
| Item Dimensions (L x W x H) | 8.7 x 4.7 x 3.55 inches |
| Item Weight | 2.2 Pounds |
| Control Method | App (Tuya Smart/Smart Life), Touch Screen Monitor, RFID Keycard |
| Operating Temperature | -25°C to +50°C |
9. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the contact information provided with your purchase or visit the official LUMOBELL website. Keep your purchase receipt as proof of purchase for warranty claims.
Manufacturer: LUMOBELL
UPC: 739768393405