BORNOON 8-Drawer Dresser Instruction Manual

1. Important Safety Information

Please read and understand all instructions before assembly and use of this product. Failure to follow these instructions may result in injury or damage.

• Anti-Tip Mechanism: This dresser is equipped with an anti-tip mechanism for safety. It is crucial to install this device securely to a wall to prevent the dresser from tipping over, especially in homes with children or pets.
• Weight Limits: Do not exceed the recommended weight limits for the dresser top or individual drawers. Overloading can compromise stability and structural integrity.
• Assembly: Assembly should ideally be performed by two adults. Ensure all hardware is tightened securely before use. Periodically check and re-tighten hardware as needed.
• Placement: Place the dresser on a level, stable surface. Avoid placing it near heat sources or in areas with excessive moisture.

2. Setup and Assembly

This section provides general guidelines for assembling your BORNOON 8-Drawer Dresser. Refer to the detailed instruction manual included in your product packaging for step-by-step visual guides and specific hardware identification.

2.1 Unpacking and Preparation

1. Open the packaging carefully and remove all components. Lay them out on a clean, soft surface (e.g., a blanket or carpet) to prevent scratches.
2. Verify that all parts and hardware listed in the included manual are present. If any parts are missing or damaged, contact customer support immediately for free replacements.
3. Gather necessary tools. Typically, a Phillips head screwdriver and a hammer are required. A power drill with appropriate bits can expedite the process but use with caution to avoid overtightening.

2.2 Assembly Steps Overview

While specific steps are in your packaged manual, the general assembly sequence involves:

• Assembling the main frame of the dresser.
• Attaching the X-shape base and adjustable center leg for stability.
• Constructing each of the eight drawers.
• Installing the metal handles onto the drawers.
• Inserting the assembled drawers into the dresser frame.
• Securing the anti-tip mechanism to the dresser and a wall stud.

3. Operating Instructions

The BORNOON 8-Drawer Dresser is designed for convenient storage and organization.

3.1 Drawer Usage

• Each of the eight drawers operates on smooth slides, allowing for easy opening and closing.
• To open a drawer, gently pull the metal handle. To close, push the drawer firmly until it is flush with the dresser frame.
• Avoid forcing drawers open or closed, as this can damage the slides or the drawer structure.
• Distribute weight evenly within drawers to prevent strain on the slides and maintain balance.

3.2 Storage Capacity

The dresser offers ample storage space. Each drawer measures approximately 13.78 inches deep, 22.83 inches wide, and 7.4 inches high. The overall dresser dimensions are 15.55 inches deep, 47.24 inches wide, and 37.2 inches high.

4. Maintenance

Proper care and maintenance will extend the life and appearance of your dresser.

• Cleaning: Wipe surfaces with a soft, damp cloth. Avoid harsh chemicals, abrasive cleaners, or polishes that may damage the finish. Dry immediately with a clean cloth.
• Spills: Clean spills immediately to prevent staining or damage to the wood.
• Hardware: Periodically check all screws and fasteners to ensure they are tight. Re-tighten as necessary to maintain structural integrity.
• Sunlight Exposure: Avoid prolonged exposure to direct sunlight, which can cause fading or discoloration of the finish.

5. Troubleshooting

This section addresses common issues you might encounter with your dresser.

• Missing or Damaged Parts: If you find any parts missing or damaged upon unpacking, do not proceed with assembly. Contact BORNOON customer service immediately for free replacements.
• Difficulty Assembling: Ensure you are following the step-by-step instructions in the included manual precisely. Double-check that all pieces are oriented correctly. If issues persist, consider seeking assistance from another person, as some steps are easier with two people.
• Drawers Not Sliding Smoothly: Verify that the drawer slides are correctly installed and aligned. Ensure no debris is obstructing the tracks. Check that all screws on the slides are tight.
• Dresser Wobbles: Ensure the dresser is placed on a level surface. Adjust the adjustable center leg if necessary to eliminate wobbling. Confirm all assembly hardware is securely tightened.
• Anti-Tip Strap Issues: Ensure the anti-tip strap is securely fastened to both the dresser and a wall stud. If the strap is damaged, contact customer service for a replacement.

6. Specifications

7. Warranty and Support

BORNOON is committed to providing high-quality products and customer satisfaction.

7.1 Product Support

If you encounter any issues with your BORNOON 8-Drawer Dresser, including missing or damaged parts, or require assistance with assembly or operation, please do not hesitate to contact our dedicated customer service team.

We offer free replacements for missing or damaged components to ensure a smooth and satisfactory experience.

7.2 Contact Information

For support, please refer to the contact details provided in your product packaging or visit the official BORNOON store on Amazon:

Visit the BORNOON Store on Amazon