1. Safety Instructions
Please read all instructions carefully before installation and use. Retain this manual for future reference.
- Electrical Safety: Always turn off power at the circuit breaker before beginning installation or maintenance. Ensure proper grounding to avoid electrical shock.
- Qualified Electrician: If you are unsure about electrical wiring, consult a qualified electrician.
- Voltage Compatibility: This fixture is designed for 120V AC residential applications. Do not connect to any other voltage.
- Fixture Integrity: Do not modify the fixture. Any modifications may compromise safety and void the warranty.
- Handling: Handle the light panel with care to prevent damage. Avoid touching the LED surface directly.
2. Package Contents
Verify that all components are present before installation:
- LEONLITE 1x4FT LED Flat Panel Light (2 units)
- Mounting Bracket (1 per light)
- Wall Anchors (4 per light)
- Wire Nuts (3 per light)
- Screws (4 per light)
3. Product Features
- 3 Wattage Selectable: Choose between 30W (3000LM), 40W (4000LM), or 46W (4600LM) to adjust brightness according to your needs.
- 3 Color Temperature Selectable: Select from 3500K (Warm White), 4000K (Natural White), or 5000K (Daylight) to match existing lighting or desired ambiance.
- Optimized for 120V Residential Use: Features an isolated flicker-free driver for stable and eye-friendly illumination.
- 5%-100% Dimmable: Compatible with Triac dimmers for a wide range of brightness control.
- Durable & Long Lasting: Constructed with an aluminum housing for heat dissipation and a 50,000-hour lifespan.
- Certifications: ETL and FCC listed for safety and quality assurance.
4. Setup and Installation
Follow these steps for proper installation. Ensure power is OFF at the circuit breaker before starting.
- Attach Mounting Bracket: Secure the mounting bracket to the existing junction box on the ceiling using appropriate screws.
- Hang Safety Cable and Wire: Attach the safety cable from the light fixture to the mounting bracket. Connect the electrical wires (black to black, white to white, green/bare to ground) using wire nuts.
- Mount Panel Light: Carefully slide the LED panel light onto the installed mounting bracket until it securely locks into place.
5. Operating Instructions
The LEONLITE LED Flat Panel Light offers adjustable settings for both brightness and color temperature.
- Adjusting Wattage (Brightness): Locate the wattage selection switch on the back of the fixture (refer to Section 3, Product Features image). Select your desired wattage: 30W, 40W, or 46W. This setting determines the maximum brightness output.
- Adjusting Color Temperature: Locate the color temperature selection switch on the back of the fixture (refer to Section 3, Product Features image). Choose between 3500K, 4000K, or 5000K to set the desired light color.
- Dimming: This fixture is 5%-100% dimmable when used with compatible Triac dimmers. Ensure your dimmer is suitable for LED lighting.
6. Maintenance
To ensure the longevity and optimal performance of your LEONLITE LED Flat Panel Light, follow these simple maintenance guidelines:
- Cleaning: Ensure the power is off before cleaning. Use a soft, dry, or slightly damp cloth to wipe the surface of the light. Avoid abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or electrical components.
- Inspection: Periodically inspect the fixture for any signs of damage or loose connections. If any issues are found, turn off the power and consult a qualified electrician.
- No User-Serviceable Parts: The LED components are integrated and not user-serviceable. Do not attempt to open or repair the fixture yourself.
7. Troubleshooting
If you encounter issues with your LED Flat Panel Light, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | No power supply; Loose wiring; Faulty switch/breaker | Check circuit breaker and wall switch. Verify all wire connections are secure. Test with a known working power source. |
| Light flickers or dims unexpectedly | Incompatible dimmer; Loose wiring; Voltage fluctuations | Ensure dimmer is compatible with LED fixtures (Triac dimmer recommended). Check wiring connections. Consult an electrician if voltage issues persist. |
| Incorrect color temperature or brightness | Incorrect switch setting | Verify the wattage and color temperature selection switches are set to your desired options (refer to Section 5). |
If the problem persists after attempting these solutions, please contact customer support.
8. Specifications
| Attribute | Detail |
|---|---|
| Brand | LEONLITE |
| Model Number | A-85610 |
| Color | White-3CCT |
| Material | Aluminum |
| Style | Modern, Close to Ceiling |
| Product Dimensions | 47.44"L x 12"W x 1.32"H |
| Power Source | AC |
| Voltage | 120 Volts (AC) |
| Light Source Type | LED |
| Wattage | 30W/40W/46W Selectable |
| Brightness | 3000LM/4000LM/4600LM Selectable |
| Color Temperature | 3500K/4000K/5000K Selectable |
| Dimmable | 5%-100% (Triac dimmers compatible) |
| Lifespan | 50,000 hours |
| Certifications | ETL, FCC |
| Item Weight | 14.11 pounds |
9. Warranty and Support
This LEONLITE LED Flat Panel Light is backed by a 3-year warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use.
For warranty claims, technical support, or any questions regarding your product, please contact LEONLITE customer service. Please have your model number (A-85610) and proof of purchase available when contacting support.
