Introduction
The Medela Magic InBra is a hands-free wearable breast pump designed for unmatched performance, comfort, and discretion. It incorporates innovative FluidFeel Technology, inspired by a baby's natural feeding, to provide powerful yet gentle pumping. This breast pump utilizes the clinically proven Symphony pumping pattern, known from Medela's hospital breast pumps, ensuring trusted hospital-grade performance.
Key features include:
- Hospital-Grade Performance: Backed by over 60 years of research, offering efficient and comfortable pumping.
- Innovative FluidFeel Technology: Surrounds the nipple with warm milk, similar to natural feeding, supporting milk output and gentle extraction even at high vacuum levels.
- Transparent Top-View Design & Night Mode: Allows for easy nipple alignment and visibility of milk flow, even in low light, thanks to the integrated tunnel light.
- Ultra-Slim Anatomic Design: Matches breast shape for comfort and discretion, featuring 105° wide-angle breast shields proven to express more milk.
- Silent and Ultra-Lightweight: Operates silently (38dB) and weighs only 7oz, making it one of the lightest in-bra pumps available. Easy to clean and assemble.
- App Connectivity: Connects to an app for remote control, session tracking, and personalized settings.
Setup
Before first use, and after each pumping session, ensure all parts that come into contact with breast milk are thoroughly cleaned and sanitized. The Medela Magic InBra is designed for easy assembly and cleaning.
Components Overview
Image: Included Components of the Medela Magic InBra Breast Pump.
The pump includes two fully assembled breast pumps with 150 ml containers and 21 mm breast shields, 2x membranes, 2x valves, 2x shield valves, 2x 24mm breast shields, and a 2x power cable.
Assembly
Follow these steps to assemble your Medela Magic InBra pump:
- Ensure all parts are clean and dry.
- Attach the yellow valve to the base of the breast shield.
- Secure the membrane over the valve.
- Connect the breast shield assembly to the pump body, ensuring a tight seal.
- Attach the collection cup to the assembled pump.
For a visual guide on assembly, please refer to the video below:
Video: Medela Magic InBra Hands-free Wearable Breast Pump - This video demonstrates the assembly and basic use of the Medela Magic InBra pump.
Operating Instructions
Nipple Alignment
Proper nipple alignment is crucial for comfortable and efficient pumping. The Medela Magic InBra features a transparent top-view design and a Night Mode tunnel light to assist with this.
Image: Transparent top-view design and Night Mode for easy nipple alignment.
Position the pump on your breast, ensuring your nipple is centered in the breast shield tunnel. The tunnel light can be activated in Night Mode for visibility in low light conditions.
Pumping Modes and Settings
The Medela Magic InBra offers two primary pumping modes:
- Stimulation Mode: Uses short, rapid suctions to initiate milk let-down.
- Expression Mode: Uses longer, deeper suctions for efficient milk extraction.
The innovative FluidFeel Technology ensures a smooth and continuous suction feel, maintaining a baseline vacuum between cycles rather than fully dropping off. This design aims for a more comfortable and refined pumping experience.
Video: Magic Fluid Feel Technology - This video explains how the FluidFeel Technology works to provide a comfortable pumping experience.
Integrated sensors automatically switch between stimulation and expression phases based on milk flow, optimizing each pumping session. You can also manually adjust suction levels directly on the pump or via the Medela app.
Image: Sensor-smart performance for individual vacuum regulation and automatic mode switching.
App Connectivity
The Medela Magic InBra connects to a dedicated app, allowing you to:
- Remotely control pump settings (on/off, pause, suction levels).
- Track pumping sessions and milk output.
- Monitor performance and stay informed on your progress.
Image: Easy control and tracking thanks to real-time app feedback.
Maintenance and Cleaning
Regular cleaning and sanitization of your breast pump parts are essential to maintain hygiene and optimal performance. The Medela Magic InBra is designed to be easy to clean and assemble.
Cleaning Instructions
- Disassemble all parts that come into contact with breast milk immediately after each use.
- Wash all disassembled parts in warm, soapy water. Use a soft brush to clean thoroughly.
- Rinse all parts thoroughly with clean water.
- Air dry on a clean towel or drying rack.
- Sanitize parts daily by boiling them in water for 5 minutes or using a steam sterilizer.
The pump motor unit should not be submerged in water. Wipe it clean with a damp cloth.
Troubleshooting
If you encounter issues with your Medela Magic InBra, consider the following common problems and solutions:
- Loss of Suction: Ensure all pump parts are correctly assembled and securely sealed. Even a small gap can lead to suction loss. Check that the membrane and valve are properly seated.
- App Connectivity Issues: If the pump stops connecting to the app or shows an error, try restarting both the pump and your device. Ensure Bluetooth is enabled and the app is up to date.
- Overfill Detection Failure/Milk Spillage: While the pump is designed with overfill detection, some users have reported issues. Always monitor milk levels visually, especially during initial uses, to prevent spillage.
- Pump Not Working/Error Codes: The pump is sensitive to assembly. Ensure every piece is pushed on completely and correctly. If the motor is not detecting parts or an error code appears, disassemble, re-check all connections, and reassemble carefully.
- Difficulty Pouring Milk/Spillage: The pump must be taken apart to pour milk. Be cautious when separating the collection cup; if the sliding lock is pushed too far down, the cups can come apart completely, leading to spillage.
If problems persist, refer to the full user manual or contact Medela customer support.
Specifications
| Feature | Detail |
|---|---|
| Brand Name | Medela |
| Model Name | Magic InBra |
| Model Number | 101045439 |
| UPC | 020451454399 |
| Number of Items | 2 |
| Unit Count | 2 Count |
| Item Weight | 1.5 Kilograms |
| Material Type | Plastic, Polypropylene, Silicone |
| Color | Clear |
| Additional Features | Double Pump, Ergonomic, Lightweight, Low Noise, Night Light |
Warranty
Medela products typically come with a manufacturer's warranty covering defects in materials and workmanship. Please refer to the warranty information included in your product packaging or visit the official Medela website for specific terms and conditions.
Extended protection plans may also be available for purchase separately.
Support
For further assistance, troubleshooting, or to access additional resources, please contact Medela customer support or visit their official website:
- Medela Official Website: www.medela.com
- Customer Service: Refer to your product packaging for regional contact information.
