NGTeco SL04-GL40N

NGTeco Smart Glass Door Lock SL04-GL40N User Manual

Model: SL04-GL40N | Brand: NGTeco

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your NGTeco Smart Glass Door Lock, model SL04-GL40N. This keyless entry system offers multiple unlocking methods and is designed for frameless glass doors.

2. Installation Guide

The NGTeco Smart Glass Door Lock features a drill-free design, allowing for installation without specialized tools. The process can typically be completed within 10 minutes.

2.1 Compatibility Requirements

2.2 Installation Steps

  1. Check Door Compatibility: Measure your glass door thickness and frame width to ensure it meets the specifications.
  2. Prepare Mounting Plate: Remove the adhesive backing from the mounting plate and align it with the edge of the door.
  3. Attach Main Lock Unit: Insert the main lock unit onto the mounting plate.
  4. Secure Screws: Tighten the screws to firmly attach the main lock unit.
  5. Install Secondary Lock: Repeat the above steps for the secondary lock unit on the opposite side of the door.
Installation steps for NGTeco Smart Glass Door Lock

Image: Visual guide for the five-minute installation process, showing measurements, plate alignment, and unit attachment.

Product dimensions for NGTeco Smart Glass Door Lock

Image: Diagram illustrating the product dimensions and required glass door thickness (2/5" - 12/25") and lock unit dimensions (6 2/5" H, 2 3/5" W, 1 3/10" D).

3. Operating Instructions

The lock supports multiple methods for unlocking, providing flexibility and convenience.

3.1 Unlocking Methods

Multiple unlocking methods for NGTeco Smart Glass Door Lock

Image: Illustration showing the four primary unlocking methods: Fingerprint, Passcode, IC Card, and Remote Control.

Passcode random digits feature for NGTeco Smart Glass Door Lock

Image: Example of the passcode random digits feature, demonstrating how random numbers can be added before and after the correct passcode to prevent peeping.

3.2 User Management

The lock supports permission management for up to 1,000 sets of users. Refer to the on-screen menu for adding, deleting, or editing user access (fingerprints, passwords, IC cards).

NGTeco Smart Glass Door Lock with menu display

Image: The NGTeco Smart Glass Door Lock showing its main unit with a menu display for user management (Add Admin, Add User, Del User, Edit User).

4. Smart Features

Low battery alert on NGTeco Smart Glass Door Lock

Image: A visual representation of the low battery alert displayed on the lock screen, prompting the user to change batteries.

Built-in electronic doorbell feature of NGTeco Smart Glass Door Lock

Image: Depiction of the integrated electronic doorbell function, showing a person pressing the doorbell icon on the lock.

5. Maintenance

5.1 Battery Replacement and Emergency Power

The lock is powered by 4 AA alkaline batteries, providing up to 6 months of battery life. Replace batteries promptly when a low-battery reminder is issued.

Emergency power supply for NGTeco Smart Glass Door Lock

Image: Instructions for emergency power supply, showing how to connect a mobile power bank via USB-C when the lock's internal batteries are depleted.

5.2 Cleaning

Wipe the lock's surface with a soft, dry cloth. Avoid using abrasive cleaners or solvents that could damage the finish or electronic components.

5.3 Durability

Constructed from high-strength materials, the lock is designed for long-term use. Laboratory verification indicates it can withstand over 100,000 operations.

Durability claim for NGTeco Smart Glass Door Lock

Image: Text graphic stating "Strong durability" and "100,000+" operations after laboratory verification.

6. Troubleshooting

ProblemPossible CauseSolution
Lock does not respond.Batteries are depleted.Connect an external power bank via the USB-C port or replace the AA batteries.
Fingerprint not recognized.Finger is wet, dirty, or improperly placed. Fingerprint not registered.Ensure finger is clean and dry. Place finger flat on the sensor. Re-register fingerprint if issues persist.
Password not accepted.Incorrect password entered.Verify the correct password. Ensure no random digits are mistakenly included if not using the anti-peep function.
IC card not working.IC card not registered or damaged.Ensure the IC card is properly registered. Try another registered card if available.
Remote control not working.Remote control battery depleted or out of range.Replace the remote control battery. Ensure you are within the effective range of the lock.

7. Specifications

FeatureDetail
BrandNGTeco
Model NameSL04-GL40N
Lock TypeDeadbolt
Unlocking MethodsFingerprint, Password, IC Card, Remote Control
MaterialZinc
ColorSilver
Dimensions (L x W x H)4 x 2.5 x 2.5 inches
Item Weight2.5 pounds
Power Source4 AA alkaline batteries (not included)
Battery LifeUp to 6 months
Emergency PowerUSB-C port for power bank
User CapacityUp to 1,000 users
Unlocking RecordsUp to 10,000 records
Connectivity ProtocolBluetooth
Compatible Glass Thickness10mm - 12mm
Minimum Door Frame Width66mm

8. Warranty and Support

For warranty information and technical support, please refer to the official NGTeco website or contact their customer service department. Keep your purchase receipt for warranty claims.

Manufacturer: Smart Security Solutions

Brand: NGTeco

Related Documents - SL04-GL40N

Preview NG-D2310 Series Smart Lock Installation Guide and User Manual
Comprehensive guide for installing and using the NG-D2310 Series smart lock by NGTeco, covering setup, features, and basic operations.
Preview NG-TC3 User Manual - NGTeco Time and Attendance System
This user manual provides comprehensive instructions for the NGTeco NG-TC3, a biometric time and attendance system. Learn about device setup, user management, verification methods, and integration with NGTeco Office software for efficient attendance tracking and management.
Preview NG-TC2 Cloud-based Fingerprint Time Clock - NGTeco
Discover the NGTeco NG-TC2, a cloud-based fingerprint time clock offering fast and reliable attendance tracking. Features include TCP/IP and dual-band Wi-Fi, a built-in backup battery, and integration with NGTeco Office software for efficient management.
Preview NGTeco NG-MB1/NG-MB2 Quick Start Guide
This guide provides a quick start for the NGTeco NG-MB1 and NG-MB2 devices, covering component identification, mounting, power and Ethernet connection, app synchronization, user registration, and data management.
Preview NGTeco SL01-A730N Smart Lock Installation Guide and User Manual
Comprehensive installation guide and user manual for the NGTeco SL01-A730N smart lock, covering setup, features, specifications, and safety instructions.
Preview NG-TC4 User Manual - NGTeco
Comprehensive user manual for the NGTeco NG-TC4 smart terminal, covering installation, operation, and management features for attendance tracking.