TECKNET Wireless Keyboard and Mouse Combo (Model TK-KM003)

1. Product Overview

The TECKNET Wireless Keyboard and Mouse Combo provides a reliable and efficient input solution for your computer. This combo features a full-size keyboard with ergonomic design and a responsive optical mouse, both connecting wirelessly via a single USB receiver.

Image: The TECKNET Wireless Keyboard and Mouse Combo in use with a laptop, highlighting its 2.4G wireless connection and plug-and-play setup.

2. Package Contents

• TECKNET Wireless Keyboard
• TECKNET Wireless Mouse
• USB Nano Receiver (stored inside the mouse)
• Instruction Manual

Note: AA batteries are not included and must be purchased separately.

3. Setup Instructions

3.1. Install Batteries

1. Open the battery compartment on the underside of the keyboard and mouse.
2. Insert one AA battery into the keyboard, ensuring correct polarity (+/-).
3. Insert one AA battery into the mouse, ensuring correct polarity (+/-).
4. Close the battery compartments securely.

Image: Illustration of battery installation in the keyboard and mouse.

3.2. Connect the USB Receiver

1. Locate the USB Nano Receiver, which is stored inside the mouse's battery compartment.
2. Remove the USB receiver from the mouse.
3. Plug the USB receiver into an available USB port on your computer.
4. The keyboard and mouse are plug-and-play and should connect automatically within a few seconds. No additional drivers are required.

Image: The USB Nano Receiver being removed from its storage slot within the mouse.

3.3. Video Guide: Setup and Features

4. Operating Instructions

4.1. Keyboard Operation

• Ergonomic Design: The keyboard features 8° tilt legs and crater-shaped keycaps designed to reduce wrist strain during extended typing sessions.
• Full-Size Layout: Includes a number pad for efficient data entry.
• Quiet Typing: Engineered with PET film key switches and 3mm key travel, reducing typing noise by up to 90%.

Image: Close-up of the keyboard highlighting its ergonomic features like adjustable feet and crater keycaps.

4.2. Mouse Operation

• Responsive Tracking: The compact and lightweight mouse uses a high-grade optical sensor for smooth and accurate cursor control.
• DPI Sensitivity: Offers 1200 DPI sensitivity, suitable for various tasks.
• Silent Clicks: Features silent-click technology for a nearly inaudible clicking experience.

Image: The TECKNET wireless mouse, emphasizing its responsive optical sensor.

4.3. Compatibility

The combo is compatible with Windows 11/10/8/7 and Linux operating systems. It works seamlessly with desktops, laptops, and other USB-enabled devices.

Image: The keyboard and mouse combo shown with different computer setups, illustrating wide compatibility.

5. Power Management

• Each device (keyboard and mouse) is powered by one AA battery.
• Features auto sleep mode to conserve battery life during inactivity.
• A low-battery indicator light on the keyboard will alert you when battery replacement is needed.

Image: Close-up of the keyboard's low battery indicator light.

6. Maintenance and Care

6.1. Spill-Resistant Design

The keyboard is designed with four drainage holes on the bottom to protect against minor liquid spills. In case of a spill, simply wipe off the liquid from the surface.

Image: Water droplets on the keyboard surface, showing its spill-resistant feature and drainage holes.

6.2. Cleaning

• To clean the keyboard and mouse, use a soft, damp cloth.
• Avoid using harsh chemicals or abrasive cleaners.
• Ensure devices are powered off before cleaning.

7. Troubleshooting

7.1. No Connection or Lag

• Ensure the USB receiver is securely plugged into a working USB port on your computer.
• Check if the batteries in both the keyboard and mouse are correctly installed and have sufficient charge. Replace if necessary.
• Move the keyboard and mouse closer to the USB receiver to ensure they are within the 42.7 ft (13 m) operating range.
• Avoid placing the receiver near metal objects or other electronic devices that may cause interference.
• Try plugging the USB receiver into a different USB port on your computer.

7.2. Keys or Mouse Buttons Not Responding

• Verify that the devices are powered on.
• Check battery levels and replace if low.
• Re-establish the connection by unplugging and re-plugging the USB receiver.
• Ensure no debris is lodged under the keys or buttons.

7.3. Mouse Cursor Jumps or is Inaccurate

• Ensure the mouse is used on a clean, non-reflective surface.
• Clean the optical sensor on the underside of the mouse with a soft cloth.
• Check for any obstructions between the mouse and the USB receiver.

8. Specifications

9. Warranty and Support

TECKNET offers 36-month support for this product. Registration may be required to activate the full support period. For further assistance or warranty claims, please visit the official TECKNET support website or contact customer service.

Official TECKNET Store: TECKNET Store on Amazon