Ougist Dry Stop Fire Extinguisher User Manual

1. Introduction

Thank you for choosing the Ougist Dry Stop Fire Extinguisher. This manual provides essential information for the safe and effective use, maintenance, and storage of your fire extinguisher. Please read these instructions carefully before use and keep this manual for future reference. Your safety is our top priority.

Image: A pack of six Ougist Dry Stop Fire Extinguishers, highlighting their compact size and the clear, concise instructions printed on each unit.

2. Safety Information

IMPORTANT: This fire extinguisher is designed for small fires only. For large or rapidly spreading fires, evacuate immediately and call emergency services.

2.1 Fire Classifications

The Ougist Dry Stop Fire Extinguisher is effective on the following types of fires:

• Class A: Common Combustibles (e.g., wood, paper, cloth, trash)
• Class B: Flammable Liquids & Gases (e.g., gasoline, oil, paint, propane)
• Class C: Energized Electrical Equipment (e.g., appliances, wiring, circuit breakers)
• Class K: Kitchen Grease Fires (e.g., cooking oils, animal fats)

Image: This image clarifies the types of fires the Ougist Dry Stop Fire Extinguisher is effective against. It shows the extinguisher alongside visual representations of Class A (common combustibles like wood and paper), Class B (flammable liquids and gases), Class C (energized electrical equipment), and Class K (kitchen grease fires), emphasizing its versatility for various household and vehicle fire risks.

2.2 General Precautions

• Do not use on large, uncontrolled fires.
• Ensure a clear escape path is available before attempting to extinguish a fire.
• Never use water on electrical or grease fires, as this can worsen the situation. The Ougist Dry Stop Fire Extinguisher uses a non-conductive dry chemical powder.
• Keep out of reach of children.
• Store in a cool, dry place away from direct sunlight and extreme temperatures.

3. Setup and Placement

3.1 Unpacking

Carefully remove the fire extinguisher from its packaging. Inspect the unit for any visible damage. Do not remove the safety pin until ready for use.

3.2 Mounting and Placement

The Ougist Dry Stop Fire Extinguisher comes with a plastic mounting bracket and features a standardized loop at the top for various hanging options. Choose a location that is easily accessible in case of an emergency.

• Kitchens: Near exits, away from cooking appliances.
• Vehicles: In the trunk, under a seat, or in a secure compartment where it won't shift during driving.
• Garages/Workshops: Near entryways or areas with potential fire hazards.
• Other High-Risk Zones: Consider placement in offices, boats, or RVs.

Image: This image highlights the compact and portable nature of the Ougist fire extinguisher, demonstrating its suitability for various environments. It shows the extinguisher placed in a kitchen, a vehicle trunk, an office, and an outdoor setting, along with its included mounting bracket, underscoring its ease of storage and accessibility wherever needed.

4. Operating Instructions (PASS Method)

In the event of a small fire, follow these steps:

1. Hold Aerosol Upright: Ensure the extinguisher is held vertically.
2. P - Pull the Pin: Remove the safety pin from the handle. This unit features a removable safety guard tab.
3. A - Aim at the Base: Aim the nozzle at the very bottom of the fire, not the flames.
4. S - Squeeze the Lever: Press the activation button/lever to discharge the dry chemical powder.
5. S - Sweep Side-to-Side: Sweep the nozzle from side to side, covering the entire area of the fire. Discharge the entire contents onto the fire from at least a 1-meter distance.

Image: This visual guide illustrates the simple three-step process for activating the Ougist fire extinguisher: first, remove the safety clip; second, press the activation button; and third, aim the spray directly at the base of the fire, as demonstrated in a kitchen setting.

Image: This image provides a clear, step-by-step guide on what to do in the event of a fire using the Ougist extinguisher. The instructions include holding the aerosol upright, pulling out the safety pin, aiming at the base of the fire, squeezing the handle, sweeping side-to-side, discharging the entire contents from at least a 1-meter distance, and replacing the unit after use.

After the fire is out, always replace the extinguisher. Even if only partially used, the pressure may be compromised, rendering it ineffective for future use.

5. Maintenance

5.1 Regular Inspection

Perform a quick visual inspection of your fire extinguisher monthly:

• Check for any visible damage, dents, or corrosion on the canister.
• Ensure the nozzle is clear and unobstructed.
• Verify the safety pin is intact and has not been tampered with.
• Note the production date stamp on the unit.

5.2 Post-Use Cleanup

The Ougist Dry Stop Fire Extinguisher uses a dry chemical powder, which is designed for mess-free cleanup with no residue. After use, simply wipe down affected surfaces.

Image: This image emphasizes the ease of cleanup after using the Ougist dry chemical fire extinguisher. It shows a hand cleaning a sink, signifying that the extinguisher leaves no residue or mess, making post-fire cleanup simple and efficient.

6. Troubleshooting

The Ougist Dry Stop Fire Extinguisher is designed for reliability. If you encounter any issues, please note the following:

• No Discharge: If the extinguisher does not discharge when the lever is squeezed after the safety pin is removed, do not attempt to repair it. Immediately replace the unit.
• Visible Damage: If the canister is dented, corroded, or shows any signs of compromise, replace it immediately.
• Expired Date: Always check the production date stamp. While the unit has a 3-year guarantee, it is recommended to replace extinguishers periodically or if the production date indicates it is past its recommended service life.

For any concerns not addressed here, please contact Ougist customer support.

7. Specifications

Image: This image provides a detailed view of the Ougist fire extinguisher, highlighting its compact dimensions (11.4 inches in height and 2.6 inches in diameter). It also lists key product attributes such as its effectiveness on grease fires, its powder-based composition for enhanced firefighting power, its lightweight and portable design, and the presence of a removable safety guard tab for secure handling.

8. Warranty and Support

8.1 Product Guarantee

The Ougist Dry Stop Fire Extinguisher is U.S. Patent-protected and rigorously tested. Each unit includes a 3-year guarantee from the production date stamp, reflecting our commitment to your family’s safety.

8.2 Customer Support

For any questions, concerns, or assistance, Ougist provides 24/7 expert support. Please refer to the product packaging or the retailer's website for specific contact information.