KEMIMOTO 3-IN-1 Front Flip Windshield Instruction Manual

1. Product Overview

The KEMIMOTO 3-IN-1 Front Flip Windshield is designed to provide versatile protection and comfort for your Polaris General UTV. Constructed from durable polycarbonate, it offers three operational modes: fully open for maximum airflow, vented for fresh air circulation, and fully closed for complete weather protection.

Key Features:

• Flexible 3-IN-1 Design: Functions as a vented front windshield, a full windshield, or fully open.
• Adjustable Handle: Allows for easy transition between modes.
• Enhanced Durability: Made from 1/5 inch thick, double-sided hardened PC material, offering superior resistance to shock, shattering, and corrosion. It is 250 times stronger than glass and 25 times stronger than acrylic.
• Clear Visibility: Ensures good light transmission and helps soften UV radiation.
• Noise Reduction: Features a pre-installed rubber seal to minimize engine and road noise.
• Upgraded Clamps: Sturdy metal clamps replace plastic alternatives for improved reliability.
• Pre-Installed Rubber Strip: For convenience and a secure seal.

2. Compatibility

This windshield is compatible with the following Polaris General models:

• Polaris General 1000 (2016-2026)
• Polaris General 4 1000 (2016-2026)
• Polaris General XP 1000 (2016-2026)
• Polaris General XP 4 1000 (2016-2026)

3. What's in the Box

Please verify that all components are present before beginning installation:

• 1X Windshield
• 1 Set of Mounting Hardware

4. Installation Instructions

Follow these steps for proper installation of your KEMIMOTO 3-IN-1 Front Flip Windshield. It is recommended to have a second person assist during certain steps.

1. Prepare the Windshield: If a protective film is present, carefully remove it from both sides of the windshield.
2. Attach Brackets: Secure the mounting brackets to the windshield using the provided hardware. Ensure all bolts are hand-tightened initially.
3. Position Windshield: Carefully place the windshield onto your UTV's frame, aligning the brackets with the designated mounting points.
4. Secure to UTV: Attach the windshield assembly to the UTV frame using the remaining mounting hardware. Adjust the position of the brackets as needed to achieve a proper fit.
5. Final Tightening: Once the windshield is correctly positioned and aligned, securely tighten all bolts. Do not overtighten.

Installation Video Guide

Removing Windshield Film Video Guide

5. Operating Instructions

The 3-IN-1 design allows for flexible use depending on weather conditions and personal preference.

• Fully Open: For maximum airflow and an open-air experience, push the windshield completely forward and secure it in the open position.
• Vented Mode: To allow fresh air circulation while maintaining some protection, adjust the windshield to the vented position using the adjustable handle. This allows cool air to enter the UTV.
• Fully Closed: For complete protection against cold wind, rain, dust, and debris, pull the windshield back to the fully closed position.

Operation Video Guide

6. Maintenance

Proper maintenance will extend the life and clarity of your windshield.

• Regular Cleaning: Gently wipe the windshield surface with a soft, clean cloth and mild soap and water. Avoid abrasive cleaners or brushes that can scratch the polycarbonate material.
• Stubborn Stains: For more stubborn dirt or mud, soak the cleaning cloth briefly before wiping.
• Inspect Seals: Periodically check the rubber seals for any signs of wear or damage to ensure continued noise reduction and weather protection.

Cleaning Dust Video Guide

Cleaning Mud Video Guide

7. Troubleshooting

If you encounter issues with your flip-up windshield, refer to the following common solutions.

• Difficulty Flipping: Ensure all mounting hardware is correctly aligned and not overtightened. Check for any obstructions in the hinge mechanism.
• Gaps or Loose Fit: Verify that the rubber seals are properly seated and undamaged. Re-check the tightness of all mounting clamps and adjust as necessary.
• Excessive Noise: Inspect the rubber seal around the perimeter of the windshield for any gaps or damage. Ensure the windshield is fully closed and secured when in the closed position.

Troubleshooting Video Guide

8. Specifications

9. Warranty Information

KEMIMOTO provides a manufacturer warranty for 12 months from the date of purchase. Please retain your proof of purchase for any warranty claims.

10. Customer Support

For further assistance, technical support, or to inquire about replacement parts, please refer to the contact information provided with your purchase or visit the official KEMIMOTO website.