Giro Launch Plus Helmet

Giro Launch Youth Snow Helmet Instruction Manual

Model: Launch Plus Helmet

Product Overview

The Giro Launch Plus Youth Snow Helmet combines playful designs with advanced performance technologies. It features the In-Form Fit System and is available in youth sizes to ensure a secure and comfortable fit. The helmet includes a soft interior lining and Super Cool Vents for all-day comfort on the slopes.

Giro Launch Youth Snow Helmet in Black/Grey Tiger Shark design

Image: Giro Launch Youth Snow Helmet in Black/Grey Tiger Shark design, showcasing its durable exterior and vibrant graphics.

Two children wearing Giro youth snow helmets and ski gear on a snowy mountain

Image: Two children wearing Giro youth snow helmets and ski gear on a snowy mountain, demonstrating the helmet in use.

Setup and Fit

Sizing Guide

To ensure proper helmet fit, measure the circumference of the head. Wrap a flexible measuring tape around the widest part of the head, just above the eyebrows and ears. Refer to the size guide below to select the appropriate helmet size.

Youth Snow Helmets Size Guide showing head circumference measurements for XS and S sizes

Image: Youth Snow Helmets Size Guide. This chart illustrates how to measure head circumference and provides corresponding youth helmet sizes (XS: 48.5-52cm, S: 52-55.5cm).

In Form Fit System

The In Form Fit System allows for quick and easy adjustment of the helmet's fit, even while wearing gloves. A dial located at the base of the helmet provides up to 6cm of adjustment, enhancing stability. The Vertical Tuning feature accommodates various goggle types and head shapes, minimizing any gap between goggles and helmet.

Icon representing vertical tuning adjustment on a helmet

Image: Vertical Tuning icon. This graphic represents the helmet's vertical adjustment capability for an optimized fit with goggles.

Strap Adjustment

Adjust the chin strap so that it is snug but comfortable under the chin. The buckle should be centered and securely fastened. Ensure there is no excessive slack in the strap to prevent the helmet from shifting during activity.

Usage Guidelines

Ventilation

The helmet features Super Cool Vents strategically placed on the top to allow hot air to escape, helping to regulate temperature and keep the wearer comfortable throughout the day.

Goggle Compatibility

Giro Launch Youth helmets are designed for seamless compatibility with Giro youth goggles. For the Launch size S, Giro Rev youth goggles are recommended. For Launch size XS, Giro Chico toddler goggles are recommended. This ensures a cohesive fit and optimal performance.

Icon representing seamless compatibility between helmet and goggles

Image: Seamless Compatibility icon. This graphic illustrates the design feature that ensures a perfect fit between Giro helmets and goggles.

Care and Maintenance

Cleaning Instructions

To clean the helmet exterior, use a soft cloth dampened with mild soap and water. Avoid harsh chemicals or abrasive cleaners. For the interior, the soft liner and earpads can be gently wiped clean. Ensure the helmet is completely dry before storage.

Storage

Store the helmet in a cool, dry place away from direct sunlight and extreme temperatures. Avoid placing heavy objects on top of the helmet to prevent damage to its structure.

Troubleshooting Common Issues

Fit Discomfort

If the helmet feels uncomfortable or too loose/tight, re-adjust the In Form Fit System dial and chin strap. Ensure the vertical tuning is set correctly to accommodate goggles without creating pressure points. If discomfort persists, re-check the sizing against the provided guide.

Visible Damage

Inspect the helmet regularly for any signs of damage, such as cracks in the shell, dents, or compromised straps. If the helmet has sustained an impact or shows significant wear, it should be replaced immediately, even if visible damage is minimal, as its protective capabilities may be compromised.

Product Specifications

BrandGiro
Model NameLaunch Plus Helmet
ColorBlack/Grey Tiger Shark
SizeExtra-Small
Age Range (Description)Toddler
Special FeatureAdjustable Strap
Outer MaterialAcrylonitrile Butadiene Styrene (ABS)
Inner MaterialExpanded Polystyrene
Item Weight300 Grams
Recommended UsesSkiing, Snow Sports, Snowboarding
Included ComponentsSnow Helmet
UPC / GTIN768686714719

Warranty Information

Giro Sport Design warrants its products to be free from defects in workmanship and materials for a period of one (1) year from the date of purchase. This warranty is extended only to the original consumer purchaser. During the warranty period, Giro will (at its sole option) repair, replace, or refund the purchase price of any defective part or product covered by this warranty when it is returned by the original owner with proof of purchase. The repair, replacement, or refund will be without charge except for reasonable shipping, handling, and insurance charges.

Customer Support

For further assistance, questions, or to report any issues not covered in this manual, please visit the official Giro website or contact their customer service department. Keep your proof of purchase handy for warranty claims.

Visit the Giro Store on Amazon for more information.

© 2024 Giro. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.