Introduction
Thank you for choosing the Wapaneus Electric Heated Blanket. This manual provides essential information for the safe and efficient use, maintenance, and care of your new heated blanket. Please read all instructions carefully before first use and retain this manual for future reference.
Important Safety Instructions
To ensure safe operation and prevent injury or damage, always follow these precautions:
- Do Not Stack: Never stack electric blankets or place heavy objects on the blanket while it is in use. This can lead to overheating.
- Thermostat Placement: Ensure the thermostat or control unit is not covered by the blanket or other items during use to prevent overheating and ensure proper function.
- Power Off: Always turn off the power and unplug the blanket when leaving the room or when not in use.
- Certification: This heated blanket is ETL certified, ensuring high standards of performance and safety, including overheat protection and short-circuit protection.
- Children and Pets: Keep out of reach of small children and pets. Do not use with infants, incapacitated persons, or persons insensitive to heat.
- Damage Inspection: Regularly inspect the blanket, cord, and controller for any signs of wear or damage. Do not use if damaged.
- Medical Conditions: Consult a physician before use if you have any medical conditions, are pregnant, or use a pacemaker.
Product Overview
The Wapaneus Electric Heated Blanket provides warmth and comfort with advanced features:
- Material: Double-sided 220GSM skin-friendly flannel (100% Polyester) for luxurious softness.
- Size: Full Size, 72 inches (L) x 84 inches (W).
- Heating Levels: 10 adjustable heat settings (ranging from 95℉ to 113℉).
- Timer Settings: 1 to 12 hours programmable timer.
- Auto-Shut Off: Features an 8-hour automatic shut-off for safety and energy conservation.
- Controller: User-friendly temperature controller with a 15ft long control line.
Image: The temperature controller for the Wapaneus heated blanket, showing the digital display for heat levels (1-10) and timer settings (1-12 hours), along with power and adjustment buttons. The control line is 15 feet long.
Image: A diagram illustrating the layered construction of the Wapaneus heated blanket, featuring 220GSM flannel, non-woven fabric, and embedded heating wires. The ETL certification logo is also visible, indicating safety compliance.
Setup Instructions
- Unpack: Carefully remove the heated blanket and controller from its packaging.
- Inspect: Check the blanket, power cord, and controller for any visible damage. Do not use if any damage is found.
- Connect Controller: Locate the connector on the blanket and the corresponding plug on the controller cord. Align the arrows on both parts and firmly push the plug into the connector until it clicks securely into place.
- Position Blanket: Spread the blanket evenly on your bed or desired surface, ensuring it is not bunched or folded.
- Plug In: Insert the power plug into a standard 120V AC electrical outlet.
Image: A close-up view of the detachable control panel connector on the Wapaneus heated blanket, highlighting how to connect and disconnect the controller for washing.
Operating Instructions
- Power On: Press the "ON/OFF" button on the controller to turn on the blanket. The display will illuminate.
- Adjust Heat Level: Use the "+" and "-" buttons under "HEAT" to select your desired heat level from 1 to 10. Level 1 is the lowest, and Level 10 is the highest (up to 113℉).
- Set Timer: Press the "TIME" button, then use the "+" and "-" buttons to set the desired operating time from 1 to 12 hours. The blanket will automatically shut off after the set time or after 8 hours if no timer is set.
- Pre-heating: For optimal comfort, it is recommended to turn on the blanket 15-30 minutes before use to pre-heat your bed.
- Power Off: To turn off the blanket manually, press the "ON/OFF" button. Unplug the blanket from the wall outlet when not in use.
Image: A woman comfortably resting on a purple Wapaneus heated blanket, illustrating the soft texture, various heat settings, and automatic safety features for a restful experience.
Image: Illustrations showing the versatility of the Wapaneus heated blanket for use in various settings: while working, on a sofa, or in bed, providing warmth anywhere.
Care and Maintenance
Proper care ensures the longevity and performance of your heated blanket.
Washing Instructions:
- Disconnect: Always remove the heating controller and unplug the power cord before washing.
- Machine Wash: Wash the blanket either by machine or hand in water below 30℃ (86℉). Use a delicate or gentle cycle in the washing machine.
- Detergent: Use a mild detergent. Do not use bleach or harsh chemicals.
- Rinse: Rinse thoroughly to remove all detergent.
Drying Instructions:
- No Commercial Dryers: Do not use commercial dryers or dryers at a local laundromat, as they can get too hot and damage the wiring of the heated product.
- Preheat Dryer: Preheat your home dryer on the "low" temperature setting for 2 minutes.
- Tumble Dry: Place the blanket into the dryer and tumble dry for 10 minutes at a low temperature.
- Remove Damp: Remove the blanket while it is still damp and gently stretch it to its original size.
- Air Dry: Drape the heated product over a clothesline or a shower rod. DO NOT use clothespins, as they can damage the internal wiring.
- Completely Dry: The heated product must be COMPLETELY dry before reconnecting the power plug or control plug.
Image: A woman demonstrating the machine washable feature of the Wapaneus heated blanket, showing the detachable control panel and the blanket being placed into a washing machine.
Troubleshooting
If your heated blanket is not functioning as expected, please refer to the following common issues and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Blanket not heating | Power cord not securely plugged in; Controller not connected properly; Power outlet issue. | Ensure all connections are secure. Try a different power outlet. |
| Controller display not working | No power; Controller malfunction. | Check power connection. If issue persists, contact customer service. |
| Blanket overheating or uneven heating | Blanket is bunched or folded; Thermostat covered. | Ensure blanket is spread flat. Do not cover the controller. Unplug and allow to cool before restarting. |
| Auto-shut off activates too soon | Timer set for a shorter duration; Safety feature activated. | Check timer settings. If the blanket is overheating, the safety feature will activate. Ensure proper usage. |
If you encounter any issues not listed here or if the problem persists after attempting the solutions, please contact Wapaneus customer service for assistance.
Specifications
| Feature | Detail |
|---|---|
| Model Number | HLB-LT-FF |
| Dimensions | 72"L x 84"W (Full Size) |
| Material | 100% Polyester Flannel (220GSM) |
| Color | Purple |
| Heating Levels | 10 (95℉ - 113℉) |
| Timer Settings | 1-12 Hours |
| Auto-Shut Off | 8 Hours |
| Control Line Length | 15 ft |
| Safety Certification | ETL Listed |
| Manufacturer | Ningbo Royal Peace Household Products Co.,Ltd |
Warranty and Support
Wapaneus is committed to providing high-quality products. If you encounter any quality-related issues with your heated blanket, please do not hesitate to contact our customer service team immediately. We are dedicated to offering a satisfactory solution within 24 hours.
For support, please refer to the contact information provided with your purchase or visit the official Wapaneus store on Amazon: Wapaneus Store.
