1. Introduction
This manual provides essential instructions for the safe and effective use of your MOLIDZ 150W AC Charger. This power adapter is designed to provide reliable power to a wide range of compatible HP laptops, including various models from the ZBook, Omen, Victus, and Pavilion Gaming series. Please read this manual thoroughly before using the product to ensure proper function and longevity.
2. Safety Information
To prevent injury or damage to your device, please observe the following safety precautions:
- Do not expose the charger to water, rain, or excessive moisture.
- Avoid extreme temperatures. Do not operate the charger in direct sunlight or near heat sources.
- Do not attempt to disassemble, modify, or repair the charger. Refer all servicing to qualified personnel.
- Ensure the power outlet voltage is compatible with the charger's input specifications (AC 100-240V).
- Use only the provided power cord and adapter.
- Keep the charger away from children and pets.
- Disconnect the charger from the power outlet when not in use for extended periods.
- Avoid placing heavy objects on the power cord or adapter.
3. Package Contents
Verify that all items are present in the package:
- 1 x MOLIDZ 150W AC Power Adapter
- 1 x AC Power Cord
4. Setup Instructions
Follow these steps to set up your MOLIDZ 150W AC Charger:
- Connect the AC Power Cord: Insert the 3-pin end of the AC power cord into the power input port on the MOLIDZ 150W AC Power Adapter. Ensure it is firmly seated.
- Connect to Power Outlet: Plug the other end of the AC power cord into a standard wall power outlet (AC 100-240V).
- Connect to Laptop: Insert the blue-tipped DC connector (4.5mm x 3.0mm) into the power input port of your compatible HP laptop. Ensure the connection is secure.
- Verify Connection: Your laptop should indicate that it is receiving power and charging.
5. Operating Instructions
The MOLIDZ 150W AC Charger is designed for straightforward operation. Once connected as described in the setup section, it will automatically begin charging your compatible laptop.
- Compatibility: This charger is compatible with HP ZBook Fury G10 G9 G8 G7, ZBook 15 G6 G5 G4 G3, ZBook 15v G5, ZBook Power G7 G8 G9 G10 G11, ZBook Studio x360 G5, ZBook Studio G11 G10 G9 G8 G7 G6 G5 G4 G3, Elitebook 1050 G1, HP Omen 15.6"/17.3" series (15-ax, 15t-ax, 15-ce, 15t-ce, 17-an, 17t-an, 17-w, 17t-w), HP Pavilion Gaming 15/16/17 series (15-e, 15-cx, 15-ec, 15-bc, 15-dk, 15-ak, 15-cb, 15z-ec, 15t-bc, 15t-dk, 15t-cx, 16-a, 16-ab, 17-cd, 17-ab), HP Spectre x360 15"/16" series (15-ch, 15t-ch, 15-df, 15t-df, 15-eb, 15t-eb, 16-f, 16t-f), and Victus 15 Gaming Laptop Computer.
- Charging Status: Refer to your laptop's operating system or indicator lights to monitor the charging status.
- Disconnecting: To disconnect, first remove the DC connector from your laptop, then unplug the AC power cord from the wall outlet.
6. Maintenance
Proper care ensures the longevity and performance of your charger:
- Cleaning: Use a soft, dry cloth to clean the charger. Do not use liquid cleaners or solvents.
- Storage: When not in use, store the charger in a cool, dry place, away from direct sunlight and extreme temperatures. Use the built-in velcro strap to manage cables neatly.
- Cable Care: Avoid bending or crimping the cables excessively, especially near the connectors, to prevent internal damage.
7. Troubleshooting
If you encounter issues with your charger, try the following solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Laptop not charging | Loose connection, faulty outlet, incompatible laptop, charger malfunction. | Ensure all cables are securely connected. Try a different wall outlet. Verify laptop compatibility (connector size and power requirements). If issues persist, contact support. |
| Charger is hot | Normal operation under load, poor ventilation, excessive load. | It is normal for the charger to become warm during use. Ensure adequate ventilation around the adapter. If it becomes excessively hot to touch, disconnect immediately and contact support. |
| Intermittent charging | Loose connection, damaged cable. | Check all connections for tightness. Inspect cables for visible damage. If damage is found, discontinue use and replace the charger. |
If these steps do not resolve the issue, please contact MOLIDZ customer support for further assistance.
8. Specifications
Detailed technical specifications for the MOLIDZ 150W AC Charger:
- Model Number: ADP-150075
- Input Voltage: 100-240 Volts AC (50/60Hz)
- Output Voltage: 19.5 Volts DC
- Output Current: 7.7 Amps
- Output Power: 150 Watts Max
- Connector Type: 4.5mm x 3.0mm Blue Tip (2-Pin)
- Special Feature: Fast Charging, Multiple Protection (Over-current, Short-Circuit, Over-Temperature, Over-charger, Over-Voltage)
- Item Weight: Approximately 1.15 pounds
- Package Dimensions: 8.15 x 5.16 x 2.24 inches
9. Warranty and Support
MOLIDZ products are manufactured to high-quality standards. For information regarding warranty coverage, returns, or technical support, please refer to the purchase platform or contact MOLIDZ customer service directly. Keep your purchase receipt as proof of purchase.
Contact Information: Please visit the official MOLIDZ website or the retailer's support page where you purchased the product for the most current contact details.
