1. Introduction
Thank you for choosing the KEYQEEN Gold Crystal Wall Lamp. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read this manual thoroughly before installation and retain it for future reference.
2. Safety Instructions
WARNING: Risk of electric shock. Disconnect power before installation or servicing.
- Always turn off the main power supply at the circuit breaker or fuse box before beginning any electrical work.
- Installation must be performed by a qualified electrician or a person with adequate knowledge of electrical wiring.
- Ensure all electrical connections are secure and comply with local electrical codes.
- Do not install this fixture in wet locations. It is designed for indoor use only.
- Handle crystal components with care to prevent breakage.
- Do not exceed the specified wattage for the light source.
3. Package Contents
Verify that all components are present and undamaged before proceeding with installation.
- Gold Crystal Wall Lamp Fixture (1 unit)
- Mounting Hardware (screws, wall anchors, wire nuts)
- Instruction Manual
Note: Light bulbs are typically not included and must be purchased separately. This fixture uses LED light sources.
4. Setup and Installation
This wall lamp is designed for wall-mounted, hardwired installation. Wires need to be reserved at the installation point.
- Turn Off Power: Locate the circuit breaker or fuse box that controls the power to the desired installation location. Turn off the power completely. Verify power is off using a voltage tester.
- Prepare Mounting Area: Remove any existing fixture and its mounting hardware. Ensure the electrical box is securely mounted in the wall.
- Attach Mounting Bracket: Secure the fixture's mounting bracket to the electrical box using the provided screws. Ensure it is firm and level.
- Connect Wiring: Carefully connect the electrical wires. Connect the live (black) wire from the fixture to the live (black) wire from the wall using a wire nut. Connect the neutral (white) wire from the fixture to the neutral (white) wire from the wall. Connect the ground (green or bare copper) wire from the fixture to the ground wire from the wall or the electrical box. Ensure all connections are tight and secure.
- Secure Fixture: Carefully push the connected wires into the electrical box. Align the fixture base with the mounting bracket and secure it with the provided screws.
- Install Light Sources and Crystals: Insert the appropriate LED light sources into the sockets. Carefully attach the crystal components to the branches of the lamp as designed.
- Restore Power: Once installation is complete and all components are secure, restore power at the circuit breaker or fuse box. Test the lamp to ensure it functions correctly.
A close-up view of the wall lamp, emphasizing the importance of turning off power before installation or maintenance.
Close-up of the lamp's mounting base, showing the attachment point to the wall.
Overall view of the Gold Crystal Wall Lamp after installation.
5. Operating Instructions
The KEYQEEN Gold Crystal Wall Lamp operates as a standard hardwired lighting fixture. Once properly installed and connected to your home's electrical system, it can be controlled via a standard wall switch.
- Turning On/Off: Use the wall switch connected to the fixture to turn the lamp on or off.
- Light Characteristics: The lamp provides a warm white light (2700-3500K) from its LED light sources, creating a comfortable and inviting ambiance. The LED design ensures uniform light distribution without dark areas or flickering, promoting eye comfort and energy efficiency.
Detailed view of the LED light source and the intricate crystal accents on the lamp.
6. Maintenance
Regular maintenance will help preserve the appearance and functionality of your wall lamp.
- Cleaning: To clean the fixture, first ensure the power is turned off. Use a soft, dry, or slightly damp cloth to wipe down the metal and crystal surfaces. Avoid using abrasive cleaners, solvents, or polishes, as these can damage the finish.
- Bulb Replacement: If an LED light source needs replacement, ensure the power is off. Allow the bulb to cool before carefully unscrewing it. Replace with an LED bulb of the same type and wattage to maintain optimal performance and safety.
- Crystal Care: The crystal components can be gently wiped with a soft, lint-free cloth. For deeper cleaning, a mild glass cleaner can be applied to the cloth (not directly to the crystals or metal) and then wiped clean.
7. Troubleshooting
If you encounter issues with your wall lamp, refer to the table below for common problems and solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not light up | No power to the fixture Loose wire connection Faulty light source | Check circuit breaker/fuse. Ensure all wire connections are secure (with power off). Replace light source. |
| Light flickers | Loose wire connection Incompatible dimmer switch Faulty light source | Check wire connections (with power off). Ensure dimmer switch is compatible with LED lights. Replace light source. |
| Lamp makes buzzing noise | Loose wire connection Incompatible dimmer switch | Check wire connections (with power off). Ensure dimmer switch is compatible with LED lights. |
If the problem persists after attempting these solutions, please contact customer support.
8. Specifications
| Feature | Detail |
|---|---|
| Item Type | Indoor Wall Lamp / Wall Sconce |
| Model Number | 22029673 |
| Installation Type | Wall Mounted, Hardwired |
| Power Source | AC |
| Material | Iron + Crystal |
| Color | Gold |
| Light Source | LED |
| Color Temperature | Warm White (2700-3500K) |
| Process | Painted |
| Dimensions (approx.) | 35cm (Width) x 45cm (Height) |
| Lighting Area | 5-10 square meters |
| Certifications | EMC, CFL, CCC, CE, UL |
| Batteries Required | No |
Diagram illustrating the approximate dimensions of the wall lamp: 35cm width and 45cm height.
9. Warranty and Support
For information regarding warranty coverage or technical support, please refer to the product packaging or contact the retailer from whom the product was purchased. You may also visit the official KEYQEEN store on Amazon for further assistance.
KEYQEEN Store Link: Visit the KEYQEEN Store on Amazon