FDCTR M01

FDCTR Remote Control Stunt Car, Model M01 User Manual

Comprehensive instructions for setup, operation, and maintenance.

1. Introduction

This manual provides detailed instructions for the safe and effective use of your FDCTR Remote Control Stunt Car, Model M01. Please read this manual thoroughly before operating the product and retain it for future reference.

2. Product Overview

2.1 Included Components

  • 1x FDCTR Remote Control Stunt Car (Blue)
  • 1x Remote Control (requires 2x AA batteries, included)
  • 2x 600mAh (3.7V) Modular Batteries (1 pre-installed)
  • 1x USB-C Charging Cable
  • 1x Screwdriver
  • 2x Spare Screws
  • 1x User Manual (this document)

2.2 Key Features

  • Upgraded Modular Batteries: Two 600mAh USB-C modular batteries provide extended play time.
  • Durable All-Terrain Design: High-traction tires, double-sided driving capability, and a robust ABS shell for various surfaces.
  • Dynamic LED Lights: Integrated LED lights illuminate during stunts and operation.
  • 2.4GHz Anti-Interference Control: Ensures smooth control up to 50 meters, allowing multiple cars to operate simultaneously without signal issues.
  • Stunt Capabilities: Performs 360° rotations, flips, and double-sided driving.
FDCTR Remote Control Stunt Car, Model M01, in blue, with remote control, spare batteries, and charging cable.

Figure 1: FDCTR Remote Control Stunt Car and accessories.

3. Setup

3.1 Car Battery Installation

  1. Locate the battery compartment on the underside of the car.
  2. Press the release button on the modular battery pack.
  3. Slide the battery pack out.
  4. Insert a charged modular battery pack by aligning it with the slot and pushing until it clicks into place.
Step-by-step images showing how to install and remove the modular battery from the RC car.

Figure 2: Modular battery installation and removal process.

3.2 Remote Control Battery Installation

  1. Use the included screwdriver to open the battery compartment on the back of the remote control.
  2. Insert 2x AA batteries, ensuring correct polarity (+/-).
  3. Replace the battery compartment cover and secure it with the screw.

3.3 Charging the Modular Batteries

  1. Remove the modular battery from the car as described in Section 3.1.
  2. Connect the USB-C charging cable to the battery pack.
  3. Plug the other end of the USB-C cable into a compatible USB power source (e.g., laptop, power bank, USB wall adapter).
  4. The battery will charge. Charging time is approximately 1 hour for 60+ minutes of play.
Image illustrating the USB-C modular battery being charged, highlighting its tool-free quick swap feature.

Figure 3: USB-C modular battery charging and quick swap feature.

4. Operating Instructions

4.1 Power On and Pairing

  1. Turn on the car using the ON/OFF switch located on the car's body.
  2. Turn on the remote control using its ON/OFF switch.
  3. The car and remote will automatically pair using 2.4GHz technology, indicated by a solid light on the remote.

4.2 Basic Controls

The remote control features two main levers for movement:

  • Forward: Push both levers forward.
  • Backward: Pull both levers backward.
  • Left Turn: Push the right lever forward and pull the left lever backward.
  • Right Turn: Push the left lever forward and pull the right lever backward.

4.3 Stunt Functions

The car's unique design allows for various stunts:

  • 360° Rotation: Push one lever forward and the other backward simultaneously to make the car spin in place.
  • Double-Sided Driving: The car is designed to continue driving even after flipping over, allowing for continuous play.
  • Flips and Tumbles: Experiment with different control combinations to achieve dynamic flips and tumbles.
Image showing the RC car performing a 360-degree flip stunt, with arrows indicating rotation.

Figure 4: The car performing a 360° rotation stunt.

4.4 LED Lights

The car features dynamic LED lights on its wheels and body. Use the 'LIGHT' button on the remote control to toggle the lights on or off.

4.5 Multiplayer Operation

The 2.4GHz control system minimizes interference, allowing multiple FDCTR Remote Control Stunt Cars to be operated in the same area without signal conflicts.

Two children playing with FDCTR RC cars, demonstrating the 2.4GHz anti-interference feature for multiplayer fun.

Figure 5: Multiple RC cars operating simultaneously without interference.

4.6 All-Terrain Performance

The car's design with high-traction tires and a durable shell allows it to operate on various surfaces, including indoor floors, grass, and gravel.

Collage of the RC car operating on different terrains: indoor floor, grass, and road.

Figure 6: The RC car demonstrating its all-terrain capabilities.

Video 1: Demonstration of the FDCTR Remote Control Stunt Car's features, including modular battery, lights, and stunt capabilities.

5. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the car and remote. Avoid water or harsh chemicals.
  • Battery Care: Always remove batteries from the car and remote when not in use for extended periods. Store batteries in a cool, dry place.
  • Storage: Store the product in a dry environment away from direct sunlight and extreme temperatures.

6. Troubleshooting

ProblemPossible CauseSolution
Car does not respond to remote.Low battery in car or remote; not paired.Charge car battery; replace remote batteries; ensure both are powered on and paired.
Short play time.Battery not fully charged; old battery.Ensure battery is fully charged; use the spare battery; consider replacing old batteries.
Poor control or interference.Obstacles blocking signal; multiple devices on same frequency.Operate in an open area; ensure no other 2.4GHz devices are causing interference.
Lights not working.Lights turned off; low battery.Press the 'LIGHT' button on the remote; charge car battery.

7. Specifications

  • Brand: FDCTR
  • Model Number: M01
  • Product Dimensions: 6.1 x 6.1 x 2.5 inches
  • Item Weight: 1.08 pounds
  • Recommended Age: 6 - 12 years
  • Car Batteries: 2x 600mAh (3.7V) USB-C Modular Batteries (included)
  • Remote Batteries: 2x AA batteries (included)
  • Control Frequency: 2.4GHz
  • Control Range: Up to 50 meters

8. Safety Information

  • This product is recommended for ages 6-12 years. Adult supervision is advised.
  • Do not operate the car near people, pets, or fragile objects.
  • Avoid operating in wet conditions or near water to prevent damage to electronic components.
  • Do not attempt to modify or disassemble the product, as this may cause damage or injury.
  • Ensure batteries are inserted with correct polarity. Do not mix old and new batteries or different types of batteries.
  • Dispose of used batteries responsibly according to local regulations.

9. Warranty and Support

FDCTR is committed to providing quality products and responsive customer support. If you encounter any issues or require assistance with your Remote Control Stunt Car, please contact our customer service team. Refer to the product packaging or our official website for contact details.

Related Documents - M01

Preview M01 Smart Glasses User Manual
User manual for the M01 Smart Glasses, detailing features, connection instructions, and precautions.
Preview M01 Smart Glasses User Manual - Features, Connection, and Safety
User manual for the M01 Smart Glasses, covering setup, features, connection instructions, and important precautions.
Preview M01 Device Technical Specifications: JL7018F Chip, Bluetooth, 2.4GHz WiFi
Detailed technical specifications for the M01 device, featuring the JL7018F chip, GC05A2 camera, 2.4GHz WiFi, Bluetooth connectivity, battery life, and performance metrics.
Preview Shishi Wenhan Smart Watch A03 User Manual and Specifications
User manual for the Shishi Wenhan Smart Watch A03. This guide covers essential information including charging, connecting to your smartphone via the H Band app, navigating watch functions (activity tracking, sleep monitoring, heart rate, blood pressure, blood oxygen, stress, etc.), troubleshooting common issues, and warranty details. It also includes FCC compliance statements.
Preview EM Full Series Mouse Instruction Manual - Setup, Requirements, and Compliance
Instruction manual for the EM Full Series Mouse, covering 2.4GHz wireless and USB connection methods, system requirements, cleaning instructions, and FCC compliance information.
Preview Forward and Reverse Remote Control Switch - Specifications and Operation
Technical specifications, operating modes, pairing instructions, and FCC compliance statement for the Dongguan Feijiang Electronic Technology Co., Ltd. WJZH-M01 forward and reverse remote control switch.