Brightown Christmas Tree Topper with 3D Glitter LED Snowflake Projector (Gold Snowman, Model B0FC4RG3YN) Instruction Manual

1. Introduction

Thank you for choosing the Brightown Christmas Tree Topper. This product is designed to enhance your holiday decorations with a unique gold snowman design, glitter finish, and a built-in LED projector that casts dynamic snowflake patterns. Please read this manual carefully before installation and use to ensure proper operation and safety.

2. Safety Information

This product is for indoor use only. Do not expose to rain or moisture.
Ensure the power outlet matches the voltage requirements of the product.
Keep away from heat sources and open flames.
Do not attempt to disassemble or modify the product. This may void the warranty and pose a safety risk.
The glitter finish may shed small particles. Avoid contact with eyes. In case of contact, rinse thoroughly with water.
Always unplug the topper from the power source before cleaning or when not in use.
Keep out of reach of small children and pets.

3. Package Contents

Please check to ensure all items are present:

1 x Brightown Gold Snowman Christmas Tree Topper with Built-in Projector
1 x Power Adapter (attached to the topper with an 8-foot power cord)
1 x Instruction Manual (this document)

4. Setup and Installation

Follow these steps to properly install your Christmas tree topper:

Prepare the Tree: Ensure your Christmas tree is stable and securely placed. The topper is suitable for 5-10 foot Christmas trees.
Position the Topper: The topper features a circular trapezoidal base designed for easy attachment. Gently place the base of the snowman topper onto the top branch of your Christmas tree. Ensure it is stable and upright.
Secure Attachment: The lightweight yet stable design helps keep the unit upright. For added stability, you may gently adjust the top branches around the base.
Connect Power: Locate the 8-foot power cord attached to the topper. Plug the power adapter into a standard electrical outlet.
Adjust Projection: For optimal projection effect, ensure the topper is at least 3 feet away from the ceiling. The farther the topper is from the ceiling, the larger the projected snowflake pattern will be. The projection covers an area of approximately 21 to 53 square feet.

Quick and Simple Installation of the Brightown Gold Snowman Tree Topper — **Figure 4.1:** Illustration of quick and simple installation, showing the snowman topper being placed on a Christmas tree. A diagram below indicates that the projection range increases with distance from the ceiling, recommending at least 3 feet for optimal effect.

How to Place the Tree Topper on Christmas Tree — **Figure 4.2:** Visual guide on how to place the tree topper. It shows trimming the top branches and inserting the tree topper for a secure fit.

5. Operating Instructions

Once installed and plugged in, the Brightown Christmas Tree Topper will automatically begin projecting dynamic snowflake patterns onto your ceiling. There are no additional controls for the projection feature.

The built-in LED lights illuminate the snowman topper and power the snowflake projector.
The projection is designed to be rotatable, creating a dynamic and engaging display.

Brightown Gold Snowman Tree Topper projecting snowflakes onto the ceiling — **Figure 5.1:** The gold snowman tree topper actively projecting bright snowflake patterns onto the ceiling, creating a festive atmosphere.

Comparison of snowflake projection range at different distances from the ceiling — **Figure 5.2:** This image illustrates how the projection range of the snowflake patterns increases with greater distance from the ceiling. It shows a smaller projection at 3 feet distance (2x3 ft range) and a larger projection at 4 feet distance (3x4 ft range).

Child admiring the Christmas tree topper with soft, cozy lighting — **Figure 5.3:** A young child is shown admiring the Christmas tree, highlighting the soft and cozy lighting provided by the topper and its projection.

Video Demonstration

Video 5.1: This video demonstrates the Brightown Christmas Tree Topper in action, showcasing its glitter design, easy installation, and the dynamic snowflake projection feature. It highlights the festive ambiance created by the rotating light patterns on the ceiling.

6. Maintenance

Cleaning: Disconnect the power before cleaning. Wipe the topper gently with a soft, dry cloth. Do not use abrasive cleaners or solvents.
Storage: When not in use, store the tree topper in its original packaging or a protective container in a cool, dry place, away from direct sunlight and moisture.
Glitter Care: It is normal for a small amount of glitter to shed over time. Handle with care to minimize shedding.

7. Troubleshooting

Problem	Possible Cause	Solution
Topper does not light up or project.	Not plugged in, power outlet issue, damaged cord.	Ensure the power adapter is securely plugged into a working outlet. Check the power cord for any visible damage.
Projection is dim or unclear.	Too close to the ceiling, ambient light too bright.	Increase the distance between the topper and the ceiling (minimum 3 feet recommended). Reduce ambient room lighting for better projection visibility.
Topper is unstable on the tree.	Improper placement, tree top too thin.	Ensure the circular trapezoidal base is firmly seated on the top branch. Adjust surrounding branches to provide additional support.

8. Specifications

Brand	Brightown
Model	B0FC4RG3YN
Color	Gold
Material	Plastic
Product Dimensions	8.8"D x 3.63"W x 10.24"H
Item Weight	1.08 pounds
Power Cord Length	8 feet
Projection Area	21 to 53 square feet (approx.)
Certifications	UL Certified (for lights)

Detailed view of the Brightown Gold Snowman Tree Topper, showing side view, glitter texture, and UL plug — **Figure 8.1:** Close-up details of the snowman topper, highlighting its side profile, the glitter application, and the standard UL certified power plug.

Dimensions of the Brightown Gold Snowman Tree Topper and suitability for various tree heights — **Figure 8.2:** This image provides the dimensions of the snowman tree topper (10 inches height, 2 inches base width, 3.5 inches depth) and illustrates its suitability for Christmas trees ranging from 5 to 10 feet tall.

9. Warranty and Support

For warranty information or technical support, please refer to the seller's policy on the purchase platform or contact Brightown customer service directly. Keep your purchase receipt for any warranty claims.

Contact Information: Please visit the official Brightown store or contact the seller through the platform where the product was purchased for support.

Online Store: Brightown Store on Amazon

	Brightown S14 Patio Solar String Lights: Installation, Operation, and Warranty Guide A comprehensive guide for Brightown S14 Patio Solar String Lights, detailing installation methods, operational features, bulb replacement, troubleshooting tips, technical specifications, package contents, and warranty information.
	GiveBest GFI-2403-01 Electric Fireplace User Manual User manual for the GiveBest GFI-2403-01 electric fireplace with realistic flame effect. Includes safety instructions, operation guide, troubleshooting, maintenance, and warranty information.
	GiveBest PTC-905 Ceramic Heater User Manual and Safety Guide Comprehensive user manual for the GiveBest PTC-905 Ceramic Heater, including safety instructions, operating procedures, maintenance tips, product specifications, and warranty information.
	GiveBest PTC-905A Ceramic Space Heater - User Manual and Safety Guide Comprehensive user manual and safety guide for the GiveBest PTC-905A Ceramic Space Heater, including operating instructions, maintenance, safety features, and warranty information.
	GiveBest HPU15A-E Digital Ceramic Heater Owner's Manual Owner's manual for the GiveBest HPU15A-E Digital Ceramic Heater with Remote Control, providing safety instructions, operating procedures, maintenance, and troubleshooting.

Brightown B0FC4RG3YN