1. Safety Instructions
Please read all instructions carefully before using the appliance. Retain this manual for future reference.
- Always ensure the juicer is properly assembled and the lid is tightly closed before operation.
- The juicer is equipped with a safety lock setting that will automatically pause if the cover is accidentally opened during the juicing process.
- Align the handle exactly with the ON/OFF start button for proper installation and operation.
- Keep hands and utensils out of the feed chute during operation to prevent injury. Use the provided push rod to guide ingredients.
- Unplug the appliance from the power outlet when not in use, before assembling or disassembling parts, and before cleaning.
- Do not immerse the motor base in water or other liquids.
- Do not operate the juicer if the power cord or plug is damaged, or if the appliance malfunctions or is dropped.
Image: Automatic Safety Sensor ensures the juicer stops if the lid is opened during operation.
2. Product Components
Your Airpher Cold Press Juicer comes with the following parts:
- Motor Base
- Juicing Bowl
- Auger (Masticating Screw)
- Feed Chute with Lid (5.8-inch wide)
- Juice Cup
- Pulp Container
- Push Rod
- Cleaning Brush
Image: Main components of the Airpher Cold Press Juicer.
3. Setup
Follow these simple steps to assemble your juicer:
- Place the juicing bowl securely onto the motor base.
- Insert the auger into the center of the juicing bowl.
- Position the feed chute on top of the juicing bowl and rotate it clockwise until it locks into place. Ensure the handle aligns with the ON/OFF start button.
- Place the juice cup under the juice spout and the pulp container under the pulp outlet.
Image: Visual guide for the 3-step assembly of the juicer.
4. Operating Instructions
The Airpher MP-802T utilizes low-speed cold press technology to minimize oxidation and maximize nutrient retention. Its 5.8-inch wide feed chute allows for juicing whole fruits and vegetables, reducing pre-cutting time.
- Preparation: Wash fruits and vegetables thoroughly. For very hard items or those with large pits, it is recommended to cut them into smaller pieces and remove pits before juicing.
- Start Juicing: Plug in the juicer. Turn the one-button control knob to the 'ON' position.
- Feed Ingredients: Place ingredients into the wide feed chute. Use the push rod gently to guide them down towards the auger.
- High Juice Yield: The 400W motor ensures efficient extraction, delivering up to 99% juice yield with minimal pulp.
- Reverse Function: If ingredients become jammed, turn the knob to the 'REV' (Reverse) position for a few seconds to clear the blockage, then return to 'ON'.
- Quiet Operation: The stable one-piece body and brushless motor ensure smooth and quiet operation.
Image: Juicer demonstrating high juice yield and efficient pulp separation.
Image: Juicing time and yield chart for different produce.
Video: Demonstration of the Airpher Cold Press Juicer in action, highlighting its wide feed chute and juicing capabilities.
5. Cleaning and Maintenance
Regular cleaning ensures the longevity and hygiene of your juicer. The juicer is designed for easy disassembly and cleaning.
- Disassembly: Turn the juicer off and unplug it. Rotate the feed chute counter-clockwise to unlock and remove it. Pull out the auger. Remove the juicing bowl from the motor base.
- Washing: Hand wash all removable parts (juicing bowl, auger, feed chute, juice cup, pulp container) with warm, soapy water and the provided cleaning brush. Rinse thoroughly.
- Base Cleaning: Wipe the motor base with a damp cloth. Do not immerse the motor base in water.
- Drying and Storage: Ensure all parts are completely dry before reassembling or storing the juicer.
Image: Visual guide for the 3-step disassembly of the juicer for cleaning.
Image: Easy cleaning of the juicer's non-metallic filter.
6. Troubleshooting Guide
If you encounter any issues with your juicer, please refer to the following common troubleshooting steps:
- Juicer not turning on: Ensure the juicer is properly plugged into a working power outlet. Verify that the feed chute is correctly installed and locked into place, with the handle aligned with the ON/OFF start button. The safety lock prevents operation if not correctly assembled.
- Juicer stops during operation: Check if the lid or feed chute has been opened. The safety sensor will automatically stop the machine. Close the lid securely to resume operation.
- Ingredients are jammed: Use the 'REV' (Reverse) function to clear any blockages. If the issue persists, disassemble the juicer, clear the obstruction, and reassemble.
- Low juice yield or wet pulp: Ensure ingredients are fresh and suitable for juicing. For optimal results, avoid overfilling the feed chute.
- Appliance is noisy or shaking excessively: Ensure the juicer is placed on a stable, flat surface. Check that all parts are correctly assembled and tightened.
Image: Important operational notes for the juicer.
7. Specifications
| Brand | Airpher |
| Model Name | MP-802T |
| Power | 400 Watts |
| Voltage | 120 Volts |
| Feed Chute Size | 5.8 inches |
| Capacity | 1.8 Liters |
| Product Dimensions | 4.33"D x 12.99"W x 4.33"H |
| Item Weight | 9 pounds |
| Material | Plastic, Stainless Steel, PMMA (Blade) |
| Number of Speeds | 1 |
| Special Features | 400W Motor, 5.8" Wide Feed Chute, Easy to Clean, High Juice Yield, Slow Masticating |
Image: Product dimensions of the Airpher Cold Press Juicer.
8. Warranty and Support
Specific warranty details for the Airpher MP-802T Cold Press Juicer are not provided in the product information. Please refer to the product packaging or contact the retailer for warranty information.
For customer support, please refer to the contact information provided on the product packaging or the official Airpher website.