1. Introduction
This manual provides essential information for the safe assembly, operation, and maintenance of your VASAGLE ULDC160K02 Dining Chairs. Please read these instructions thoroughly before assembly and retain them for future reference.
The VASAGLE ULDC160K02 Dining Chairs are designed for comfort and style, featuring a boho PE rattan back, synthetic leather upholstery, and a sturdy steel frame. They are suitable for dining rooms, kitchens, and other accent seating needs.
2. Safety Information
- Weight Capacity: Do not exceed the maximum static load capacity of 265 lb (120 kg) per chair. Exceeding this limit may cause damage or injury.
- Stable Surface: Ensure chairs are placed on stable, level surfaces to prevent tipping.
- Assembly: Follow all assembly instructions carefully. Incorrect assembly can lead to instability and potential hazards.
- Children: Keep small parts away from children during assembly. Do not allow children to climb on or play with the chairs unsupervised.
- Inspection: Regularly check all screws and connections to ensure they remain tight. Retighten as necessary.
- Movement: Do not drag the chairs across the floor; lift them to move to prevent damage to the legs or floor.
3. Package Contents
Before beginning assembly, verify that all components listed below are present and undamaged. If any parts are missing or damaged, please contact customer support.
- 2 x Dining Chair (disassembled components)
- 2 x Assembly Kit (hardware and tools)
- 1 x Instructions Manual (this document)
4. Setup and Assembly
Detailed step-by-step assembly instructions, including diagrams and a parts list, are provided within the included assembly kit. Please refer to that document for specific guidance.
General Assembly Tips:
- Assemble the chairs on a soft, clean surface to prevent scratches.
- Ensure all screws are finger-tightened initially, then fully tighten once the chair is upright and stable.
- Important Note on Legs: Pay close attention to the back legs during assembly. They are typically labeled D and E in the instructions, but may have engraved numbers (e.g., ONE and TWO) on the legs themselves. Ensure leg number TWO fits into the E side, and leg number ONE goes into the D spot. Incorrect placement can lead to instability.
Figure 4.1: Chair Dimensions and Static Load Capacity. Max. Static Load per Chair: 265 lb (120 kg).
5. Operating Instructions (Usage)
The VASAGLE ULDC160K02 Dining Chairs are designed for comfortable seating in various indoor settings.
- Seating: Sit centrally on the seat cushion. The 3.1-inch thick, 18.1-inch wide padded seat provides ample comfort.
- Back Support: The double-curved PE rattan backrest offers ergonomic support and ventilation for extended comfort.
- Leveling: Utilize the swivel leveling feet to ensure the chair remains stable on uneven floors. Adjust each foot by rotating it until the chair no longer wobbles.
Figure 5.1: Ergonomic Back Support and Ventilated Rattan.
Figure 5.2: Cushioned Seat Construction with High-Resilience Foam.
6. Maintenance
Proper care will extend the life and appearance of your dining chairs.
- Cleaning Upholstery: The synthetic leather upholstery can be wiped clean with a damp cloth. For spills, blot immediately with a clean, dry cloth. Avoid abrasive cleaners or harsh chemicals.
- Rattan Care: Dust the PE rattan backrest regularly with a soft, dry cloth. Avoid prolonged exposure to direct sunlight or excessive moisture to prevent material degradation.
- Frame Care: Clean the steel frame with a soft, damp cloth. Dry thoroughly.
- Hardware: Periodically check and tighten all screws and bolts to ensure structural integrity.
Figure 6.1: Leveling Feet and Easy-to-Clean Surface.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Chair wobbles | Uneven floor surface; loose connections; incorrect leg assembly. | Adjust the swivel leveling feet until stable. Check and tighten all screws. Verify back legs are correctly installed (refer to Section 4). |
| Parts do not fit during assembly | Incorrect orientation of parts; mismatched left/right or front/back components. | Review the assembly instructions carefully, paying attention to part labels and orientation. Do not force parts together. |
| Squeaking noise | Loose screws or connections. | Tighten all screws and bolts. If the noise persists, disassemble and reassemble the affected section, ensuring all parts are correctly aligned. |
8. Specifications
| Feature | Detail |
|---|---|
| Brand | VASAGLE |
| Model Number | ULDC160K02 |
| Color | Coffee Brown |
| Product Dimensions (D x W x H) | 21.6" x 19.7" x 30.8" (55 cm x 50 cm x 78.2 cm) |
| Seat Height | 3.1 Inches (8 cm) (Cushion thickness) |
| Seat Depth | 18.1 inches (46 cm) |
| Seat Length | 18.1 Inches (46 cm) |
| Item Weight | 21.2 pounds (9.6 kg) per chair |
| Max. Static Load Capacity | 265 lb (120 kg) per chair |
| Material | Steel, PE Rattan, Synthetic Leather, 58D Molded Foam, Plywood |
| Back Style | Open Back with Boho PE Rattan |
| Special Feature | Ergonomic dual-curve back, easy cleaning, swivel leveling feet |
| Indoor/Outdoor Usage | Indoor |
9. Warranty and Support
For warranty information or technical support, please refer to the documentation included with your purchase or contact VASAGLE customer service directly. Contact details can typically be found on the manufacturer's website or on your purchase receipt.
If you have any questions or require assistance with your VASAGLE ULDC160K02 Dining Chairs, please do not hesitate to reach out to the manufacturer's support team.