Introduction
Welcome to the URTOPIA Carbon Fold 1 E-Bike user manual. This guide provides essential information for the safe and efficient operation, maintenance, and care of your new electric bicycle. Please read this manual thoroughly before your first ride and keep it for future reference.
Safety Warnings
- Always wear a helmet when riding.
- Familiarize yourself with local traffic laws and regulations.
- Perform pre-ride checks before each use, including brakes, tires, and battery.
- Do not ride under the influence of alcohol or drugs.
- Avoid riding in adverse weather conditions or on slippery surfaces.
Setup and Initial Preparation
Assembly-Free Design
The URTOPIA Carbon Fold 1 E-Bike is designed for immediate use with minimal setup. No complex assembly steps are required. Simply unfold the bicycle in two easy steps, and it's ready to ride.
Image: The URTOPIA Carbon Fold 1 E-Bike comes pre-assembled, requiring only unfolding before use.
Battery Charging
Your e-bike is equipped with a removable 36V 7Ah battery integrated into the seat post. For optimal performance and longevity, fully charge the battery before your first ride. A full charge typically takes approximately 3 hours.
- Locate the charging port on the removable seat post.
- Connect the charger to the battery and then to a power outlet.
- The indicator light on the charger will change to indicate a full charge.
Image: The removable seat post battery offers up to 40 miles of range and charges in about 3 hours.
Operating Instructions
Folding and Unfolding
The Carbon Fold 1 E-Bike features a convenient 2-step folding mechanism, allowing it to be folded in approximately 30 seconds for easy storage and transport.
- Unfolding: Release the frame latch and handlebar latch. Extend the frame and handlebar until they click into place. Secure all latches.
- Folding: Release the handlebar latch and fold the handlebar down. Release the frame latch and fold the main frame in half. Ensure all components are securely folded.
Image: The ultra-light 29lbs design makes the folded e-bike easy to carry.
Image: The compact folded size allows for easy transport in a car trunk.
Smart Display Functions
The integrated smart display provides real-time information about your ride and bike status. Use the buttons near the display to navigate through functions and adjust settings.
- Speed: Current riding speed.
- Battery Level: Remaining battery charge.
- Light Status: Indicates if headlights/taillights are on/off.
- Cadence: Your pedaling revolutions per minute (RPM).
- Rider Power: Power output from your pedaling.
- Motor Power: Power output from the electric motor.
- Assistance Level: Current level of pedal assist (adjust to increase or decrease motor assistance).
Image: The smart display provides comprehensive ride data at a glance.
Pedal Assist System and Gearing
The URTOPIA Carbon Fold 1 E-Bike features a 500W motor and a torque sensor for a smooth, responsive pedal assist experience. The Shimano 8-speed gearing system allows you to adapt to various terrains and riding conditions.
- Torque Sensor: Automatically adjusts motor power based on your pedaling effort, providing a natural and intuitive boost.
- Shimano 8-speed Derailer: Use the gear shifter on the handlebar to change gears, optimizing your pedaling efficiency for climbs or flat roads.
Image: The 500W motor and smart torque sensor provide powerful and efficient pedal assistance.
Braking System
Your e-bike is equipped with reliable disc brakes for effective stopping power. Ensure brakes are functioning correctly before each ride.
- The left lever controls the front brake, and the right lever controls the rear brake.
- Apply both brakes simultaneously for balanced and effective stopping.
Lighting
The e-bike includes integrated front and rear lights for visibility. Activate them via the smart display controls, especially when riding in low-light conditions.
Maintenance
Regular maintenance ensures the longevity and safe operation of your URTOPIA Carbon Fold 1 E-Bike.
Battery Care
- Charge the battery regularly, even if not in use, to maintain its health.
- Store the battery in a cool, dry place, away from direct sunlight and extreme temperatures.
- Do not expose the battery to water or excessive moisture.
Cleaning
- Clean the bike with a damp cloth and mild soap. Avoid high-pressure washers.
- Keep the chain and gears clean and lubricated.
Tire Pressure
Check tire pressure before each ride. Refer to the tire sidewall for recommended PSI (Pounds per Square Inch).
Brake Inspection
Regularly inspect brake pads for wear and ensure brake levers provide firm and responsive stopping power. Adjust or replace as needed.
Troubleshooting
This section addresses common issues you might encounter with your URTOPIA Carbon Fold 1 E-Bike.
| Problem | Possible Cause | Solution |
|---|---|---|
| Bike does not power on. | Battery not charged; Battery not properly seated; Power button not pressed correctly. | Charge battery; Ensure battery is fully inserted into seat post; Press and hold power button. |
| Motor not assisting. | Low battery; Pedal assist level set to zero; Sensor issue. | Charge battery; Increase pedal assist level on display; Contact support if issue persists. |
| Folding mechanism is stiff. | Lack of lubrication; Debris in hinge. | Apply a small amount of lubricant to hinges; Clean any visible debris. |
For issues not listed here or if solutions do not resolve the problem, please contact URTOPIA customer support.
Specifications
Key technical specifications for the URTOPIA Carbon Fold 1 E-Bike:
| Feature | Detail |
|---|---|
| Bike Type | Electric Bike, Commuting Bike |
| Model Name | EC1F |
| Weight | 29 lbs (13.15 kg) |
| Frame Material | Carbon Fiber |
| Motor | 500W |
| Battery | 36V 7Ah (Removable Seat Post) |
| Max Range | Up to 40 Miles (in pedal assist mode) |
| Top Speed | 20 Mph |
| Gearing System | Shimano 8-speed |
| Wheel Size | 18 Inches |
| Brake Style | Disc |
| Max Weight Recommendation | 220 Pounds |
| UL Certification | UL2849 Certified |
Image: Detailed dimensions of the URTOPIA Carbon Fold 1 E-Bike in both unfolded and folded states.
Image: Comparison of Carbon Fiber vs. Aluminum Alloy frame materials, highlighting the benefits of carbon fiber used in this model.
Warranty and Support
The URTOPIA Carbon Fold 1 E-Bike comes with a 2-year Limited Warranty. For warranty claims, technical support, or any inquiries, please contact URTOPIA customer service.
- Manufacturer: Velots (Changzhou) Technology Co., Ltd
- Warranty Description: 2-year Limited Warranty
- Online Support: Visit the official URTOPIA website or Amazon store for contact information.
Product Video
Video: An official product video showcasing the URTOPIA Carbon Fold 1 E-Bike's features, including its lightweight design, folding mechanism, and smart technology. This video highlights the ease of transport and riding experience.
