1. Introduction
This manual provides essential information for the safe and efficient operation, installation, and maintenance of your Astralpool Eco Elyo-09 Pool Heat Pump. Please read this manual thoroughly before installation and use, and keep it for future reference. The Eco Elyo-09 is designed to maintain your pool at an ideal temperature, offering high performance and energy efficiency through its Full Inverter technology.
2. Safety Information
Always adhere to local electrical codes and regulations. Installation and servicing should only be performed by qualified personnel. Disconnect power before performing any maintenance or service. Do not operate the unit if any part is damaged. Keep children and pets away from the unit during operation. Ensure proper ventilation around the heat pump.
- Do not block air inlets or outlets.
- Ensure the unit is properly grounded.
- Keep flammable materials away from the heat pump.
- Do not attempt to repair the unit yourself. Contact qualified service personnel.
3. Product Overview
The Astralpool Eco Elyo-09 is an advanced pool heat pump featuring Full Inverter technology for optimal energy consumption and quiet operation. It is equipped with a digital control panel and offers remote management capabilities via Bluetooth and Wi-Fi through the Fluidra Pool app.
Figure 3.1: Front view of the Astralpool Eco Elyo-09 Pool Heat Pump, showing the main unit with its fan grille and integrated control panel.
Figure 3.2: The Eco Elyo-09 Heat Pump, designed to maintain perfect water temperature effortlessly using advanced technology.
Figure 3.3: Illustration of the three operating modes: Ecosilence for quiet, energy-saving operation; Smart for automatic power adjustment based on temperature; and Boost for rapid temperature increase.
Figure 3.4: The Eco Elyo-09 model with a 7 kW power level, suitable for heating pools up to 55 cubic meters.
Figure 3.5: The heat pump features Bluetooth and Wi-Fi connectivity, allowing users to control all settings remotely via the Fluidra Pool application.
4. Setup and Installation
4.1 Unpacking
Carefully remove the heat pump from its packaging. Inspect the unit for any signs of shipping damage. Report any damage to your supplier immediately.
4.2 Placement
Choose a location with adequate airflow, away from direct sunlight and heat sources. Ensure there is sufficient clearance around the unit for maintenance and proper air circulation (minimum 50 cm from walls or other obstructions). The unit should be placed on a solid, level surface capable of supporting its weight (42 kg).
4.3 Electrical Connection
All electrical wiring must comply with local regulations and be performed by a qualified electrician. Ensure the power supply matches the unit's requirements (1000 watts). Install a dedicated circuit breaker and a residual current device (RCD) for safety.
4.4 Plumbing Connection
Connect the heat pump to your pool's filtration system. The heat pump should be installed after the filter and before any chemical feeders. Use appropriate plumbing fittings and ensure all connections are watertight. A bypass valve kit is recommended for easier maintenance and flow adjustment.
5. Operating Instructions
The Eco Elyo-09 heat pump offers intuitive control via its integrated digital panel and remote management through the Fluidra Pool app.
5.1 Control Panel
The digital control panel allows you to power the unit on/off, select operating modes, and set the desired water temperature. Refer to the on-screen prompts for navigation.
5.2 Operating Modes
- Boost Mode: Provides rapid heating to quickly reach the desired temperature. Ideal for initial heating or when a quick temperature increase is needed.
- Smart Mode: Automatically adjusts the compressor and fan speed based on the current water temperature and desired set point. This mode balances heating performance with energy efficiency.
- Ecosilence Mode: Prioritizes energy saving and quiet operation by optimizing the compressor and fan speeds for minimal power consumption and noise. Suitable for maintaining temperature once the desired level is reached.
5.3 Temperature Adjustment
Use the up/down arrows on the control panel or within the Fluidra Pool app to set your desired pool water temperature. The unit will automatically work to achieve and maintain this temperature.
5.4 App Connectivity (Bluetooth & Wi-Fi)
Download the Fluidra Pool app from your device's app store. Follow the in-app instructions to pair your heat pump via Bluetooth or connect it to your home Wi-Fi network. This allows for remote monitoring and control of your heat pump's settings from anywhere.
6. Maintenance
Regular maintenance ensures the longevity and efficient operation of your heat pump.
6.1 Regular Cleaning
- Keep the area around the heat pump clear of debris, leaves, and other obstructions.
- Clean the evaporator coil regularly with a soft brush or low-pressure water spray to remove dirt and dust.
- Wipe down the exterior casing with a damp cloth. Do not use harsh chemicals.
6.2 Winterization
If you live in an area with freezing temperatures, it is crucial to properly winterize your heat pump to prevent damage. Consult a professional for proper winterization procedures, which typically involve draining water from the unit and covering it.
6.3 Seasonal Checks
Before each swimming season, inspect all electrical connections, plumbing, and the general condition of the unit. Ensure there are no leaks or unusual noises during operation.
7. Troubleshooting
This section provides solutions to common issues. For problems not listed here, contact customer support.
| Problem | Possible Cause | Solution |
|---|---|---|
| Heat pump not turning on | No power supply; Circuit breaker tripped; Control panel error | Check power connection; Reset circuit breaker; Consult manual for error codes or contact support |
| Insufficient heating | Dirty evaporator coil; Low water flow; Incorrect temperature setting; Ambient temperature too low | Clean coil; Check pump and filter; Adjust temperature setting; Note operating temperature limits (-5°C minimum) |
| Unusual noise | Loose components; Fan obstruction; Compressor issue | Inspect for loose parts; Clear obstructions; Contact qualified technician |
| Water leakage | Loose plumbing connections; Condensation (normal); Internal leak | Tighten connections; Condensation is normal, ensure proper drainage; For internal leaks, contact technician |
8. Specifications
Key technical specifications for the Astralpool Eco Elyo-09 Pool Heat Pump.
| Feature | Specification |
|---|---|
| Model Number | ECO ELYO 9 kW |
| Manufacturer | ASTRALPOOL |
| Heating Capacity | 7 kW |
| Electrical Power | 1000 watts |
| Dimensions (L x W x H) | 83.1 x 65.4 x 39.3 cm |
| Product Dimensions (Amazon) | 100 x 100 x 100 cm |
| Weight | 42 kg |
| Operating Temperature | Down to -5°C |
| Connectivity | Bluetooth, Wi-Fi (Fluidra Pool App) |
| Recommended Pool Volume | Up to 55 m³ (for 7 kW model) |
9. Warranty and Support
Your Astralpool Eco Elyo-09 Pool Heat Pump comes with a manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms, conditions, and duration. For technical support, spare parts, or warranty claims, please contact your authorized Astralpool dealer or visit the official Astralpool website for contact information.
For additional resources and product information, you may visit the Astralpool Brand Store on Amazon.
