Introduction
Thank you for choosing the RORRY 10,000mAh 30W Portable Charger. This instruction manual provides essential information for the safe and efficient operation of your device. Please read it thoroughly before use and retain it for future reference.
What's in the Box
- Power Bank x 1
- Built-in Cables (USB-C and Lightning)
- User Manual x 1
Product Features
- Built-in Retractable Cables: The power bank features two integrated 25.6-inch retractable cables (USB-C and Lightning) for convenient, tangle-free charging. Gently pull to extend, and they automatically retract when not in use.
- All-in-One Charging Solution: Designed for compatibility with various Apple devices, including iPhone (16/15/14/13/12 series), Apple Watch (S10 and earlier models), iPad, and AirPods.
- 10,000mAh High Capacity: Provides sufficient power for multiple charges, offering approximately 2 full charges for an iPhone 16, 18 charges for an Apple Watch S10, 10 charges for AirPods Pro 2, and 0.86 charges for an iPad.
- Simultaneous Multi-Device Charging: Equipped with 5 output options: 30W USB-C cable, 20W iOS cable, a 30W USB-C port, a 15W USB-A port, and a 5W Apple Watch charger, allowing up to 5 devices to charge concurrently.
- Enhanced Safety and Durability: Certified by FCC, UL, and IEC, the power bank includes advanced protections against short circuits, overcharging, and overheating. The retractable cables are tested for over 20,000 pulls and bends.
Setup
Initial Charging of the Power Bank
Before first use, fully charge your RORRY Portable Charger. Use the included USB-C to USB-C cable to connect the power bank to a compatible wall adapter (not included). The power bank will fully recharge in approximately 2.2 hours.

Image: The RORRY Portable Charger connected to a wall adapter via its built-in USB-C cable, indicating a full charge in 2.2 hours.
Operating Instructions
Charging Your Devices
- Using Retractable Cables: Gently pull the desired USB-C or Lightning cable from its housing until it reaches the required length. Connect the cable to your device. To retract, pull slightly again, and the cable will automatically coil back into the power bank.
- Using the Apple Watch Charger: Place your Apple Watch directly onto the magnetic charging pad located on the top surface of the power bank. Ensure proper alignment for charging to begin.
- Using USB-C and USB-A Ports: For devices requiring external cables, connect your device's charging cable to the appropriate USB-C (30W Max) or USB-A (15W Max) port on the side of the power bank.
- Power Indicator: The LED indicator lights on the power bank will show the remaining battery level. Press the power button to check the current charge status.

Image: The RORRY Portable Charger simultaneously charging an iPhone 16 via a built-in cable and an Apple Watch on its magnetic pad, highlighting fast charging capabilities.

Image: The RORRY Portable Charger demonstrating universal compatibility by charging an iPhone, Apple Watch, iPad, and Nintendo Switch simultaneously.
Video: An official RORRY video demonstrating the features of the 10,000mAh 30W Power Bank, including the retractable cables and multi-device charging capabilities.
Maintenance
- Keep the power bank away from water, fire, and extreme temperatures.
- Clean the device with a soft, dry cloth. Avoid using harsh chemicals.
- Store in a cool, dry place when not in use.
Troubleshooting
- Device not charging: Ensure the power bank is sufficiently charged. Press the power button to activate charging. Check cable connections for security.
- Slow charging: Verify that your device supports fast charging and that the cable used is appropriate. Charging multiple devices simultaneously may reduce individual charging speeds.
- Power bank not recharging: Confirm the charging cable and wall adapter are functioning correctly. Ensure the power bank's input port is clean and free of debris.
Specifications
- Brand: RORRY
- Model Name/Number: H1
- Battery Capacity: 10,000 Milliamp Hours
- Connector Type: Built-in Cable L+C, 1A1C (Lightning, USB-C, USB-A, USB-C ports)
- Color: Starlight
- Special Features: All-in-One, Auto Shut-Off, Built-In Cable, Fast Charging, LED Indicator Lights
- Voltage: 15 Volts
- Power Source: Battery
- Number of Ports: 2 (USB-C, USB-A) plus 2 built-in cables and Apple Watch charger
- Battery Charge Time (Power Bank): 2.2 Hours
- Compatible Devices: AirPods/AirPods Pro, Apple Watch Ultra2/Ultra/10/9/8/7/6/SE/5/4/3, iPad mini/Air/Pro, iPhone 16/15/14/13/12/11/SE/XS/XR/X/8/7/6
- Battery Cell Type: Lithium Ion
- UPC: 639510715373
- Item Weight: 0.55 Pounds
- Item Dimensions (L x W x Thickness): 4.33" x 2.44" x 0.94"
- Battery Weight: 150 Grams
Warranty and Support
The RORRY Portable Charger comes with a 30-Day Money Back Guarantee, a 1-Year Warranty, and Lifetime Technical Support. For any problems or inquiries, please contact support@rorry.com. Our support team aims to reply within 24 hours.





