Introduction
This manual provides essential information for the Jada Toys Street Fighter II Vega 1:12 Scale Action Figure. It covers setup, operation, maintenance, and troubleshooting to ensure you get the most out of your collectible figure. The Vega action figure is designed with high articulation and comes with interchangeable parts to recreate iconic poses and scenes from the Street Fighter II game.
Image: The Vega action figure in a dynamic fighting pose, showcasing its detailed sculpt, mask, and signature claw accessory.
Safety Information
- Choking Hazard: This product contains small parts and is not suitable for children under 3 years of age. Keep all accessories out of reach of young children.
- Adult Supervision: Recommended for ages 13 and up. Adult supervision is advised for younger users.
- Handling: Handle the figure and its accessories with care to prevent breakage. Avoid excessive force when changing parts or posing.
- Storage: Store the figure away from direct sunlight, extreme temperatures, and high humidity to prevent material degradation.
Package Contents
Verify that all components listed below are present in your package:
- 1x Vega Action Figure (1:12 Scale)
- 1x Interchangeable Masked Head
- 1x Interchangeable Unmasked Head
- 2x Pairs of Interchangeable Hands (e.g., open hands, fists)
- 1x Removable Mask
- 1x Detachable Claw Accessory
- 1x Dynamic Claw Effect Piece
Image: The Vega action figure standing alongside its various interchangeable parts, including two heads, multiple hands, the claw, and a claw effect piece.
Image: The front of the product packaging, displaying the Vega figure and its accessories through a clear window, with "Ultra Street Fighter II" branding.
Setup
Follow these steps for initial setup and customization of your Vega action figure:
- Unboxing: Carefully remove the figure and all accessories from the packaging. Retain the packaging for future storage or display.
- Attaching Heads:
- To attach a head, align the neck peg on the figure's body with the hole in the desired head.
- Gently push the head onto the peg until it is securely seated. Do not force.
- To remove, gently pull the head straight off the peg.
- Attaching Hands:
- The figure comes with various hand gestures. To change hands, gently pull the existing hand off the wrist peg.
- Align the hole in the new hand with the wrist peg and gently push it on.
- Attaching the Claw:
- The claw accessory attaches to Vega's right hand. Ensure the hand is properly attached to the wrist.
- Slide the claw onto the hand, ensuring it fits snugly.
- The dynamic claw effect piece can be placed over the claw to simulate motion.
Image: A side profile of the Vega action figure, highlighting its articulation points and the details of its costume and accessories.
Image: The back view of the Vega action figure, showing the intricate details of its braided hair and the design on its back.
Operating (Posing and Display)
The Vega action figure features multiple points of articulation, allowing for a wide range of dynamic poses. Exercise care when manipulating joints.
- Joint Articulation: Gently bend and rotate joints at the neck, shoulders, elbows, wrists, torso, hips, knees, and ankles to achieve desired poses.
- Dynamic Poses: Utilize the figure's articulation to recreate Vega's signature moves, such as the Flying Barcelona Attack or Izuna Drop.
- Interchangeable Parts: Swap heads and hands to change Vega's expression and hand gestures for different display scenarios.
- Mask Removal: The mask accessory can be removed from the masked head for an unmasked appearance, or the unmasked head can be used directly.
Image: The Vega action figure in a powerful pose, with its claw arm raised, ready for an attack, demonstrating its articulation.
Image: The Vega action figure in a low crouching stance, showcasing its flexibility and ability to hold complex poses.
Image: The Vega action figure with its mask removed, revealing the character's face, demonstrating the interchangeable head feature.
Maintenance
Proper care will extend the life and appearance of your action figure.
- Cleaning: Use a soft, dry cloth to gently wipe away dust. For stubborn dirt, lightly dampen the cloth with water and mild soap, then wipe clean and dry immediately. Avoid harsh chemicals or abrasive materials.
- Storage: When not on display, store the figure in its original packaging or a clean, dry, dust-free environment away from direct sunlight and extreme temperatures.
- Joint Care: If joints become stiff, gently warm the area with a hairdryer on a low setting for a few seconds to loosen the plastic before attempting to move. Do not overheat.
Troubleshooting
| Issue | Possible Cause | Solution |
|---|---|---|
| Stiff Joints | New figure, cold environment, or paint stuck in joint. | Gently warm the joint with a hairdryer on low heat for a few seconds. Slowly work the joint to loosen it. Do not force. |
| Loose Joints | Normal wear, or manufacturing tolerance. | For minor looseness, a small amount of clear nail polish or super glue applied to the peg and allowed to dry can add friction. Apply sparingly. |
| Accessories won't fit | Incorrect alignment or slight manufacturing variance. | Ensure correct orientation. If too tight, gently warm the accessory or receiving hole with a hairdryer on low heat for a few seconds to make the plastic more pliable. |
Specifications
- Product Dimensions: 3.13 x 1.75 x 6 inches
- Item Weight: 1.2 pounds
- Model Number: QDJD351727
- Scale: 1:12 Scale
- Manufacturer Recommended Age: 13 years and up
- Brand: Jada Toys
Warranty and Support
For warranty information or product support, please contact Jada Toys directly through their official website or customer service channels. Keep your purchase receipt as proof of purchase.
For more information, visit the Jada Store on Amazon.
