Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Itomoro Wireless Baby Car Camera, Model ACZ412. Please read this manual thoroughly before using the product to ensure proper function and safety.
Package Contents
Verify that all items listed below are included in your package:
- 4.3 Inch Monitor
- Night Vision Camera
- Cigarette Lighter Adapter
- Camera Base and Straps
- Suction Cup Holder
- 1.5m Power Cord
- 3.5m Power Cord
- User Manual (this document)

Setup and Installation
Before first use, ensure both the monitor and camera are fully charged. The camera and monitor are designed for automatic pairing upon power-on. If pairing does not occur automatically, manual pairing may be required (refer to the "Operating Instructions" section).
Camera Installation
- Step 1: Prepare Headrest
Pull the headrest up to create space for the camera strap. - Step 2: Attach Horizontal Strap
Securely tighten the horizontal strap of the camera base around the headrest. - Step 3: Attach Vertical Strap
Securely tighten the vertical strap to prevent movement. - Step 4: Adjust Camera Angle
Rotate the adjustable camera to achieve the desired viewing angle of your baby. The camera offers 360-degree rotation.

Monitor Installation
The monitor can be installed in two ways using the provided suction cup holder:
- Mount on Dash: Attach the suction cup to a clean, flat surface on your dashboard.
- Mount on Windshield: Attach the suction cup to a clean area on your windshield.
The suction cup holder is adjustable, allowing you to set the angle and length for optimal viewing. Use the open-and-shut control to secure or release the suction cup.


Connect the monitor to power using the provided cigarette lighter adapter and power cord. The camera also has a built-in battery for wireless operation, reducing cable clutter.
Operating Instructions
Powering On/Off and Initial Pairing
- Charge Devices: Fully charge both the monitor (3000mAh battery) and the camera (2000mAh battery) before first use. A full charge provides up to 5 hours of battery life.
- Power On Monitor: Short press the 'M' button on the monitor to turn it on.
- Power On Camera: Long press the power button on the camera to activate it. A clicking sound indicates successful activation.
- Automatic Pairing: The monitor and camera should automatically pair and display the image.
- Manual Pairing (if needed): If automatic pairing fails, short press the 'M' button on the monitor to access the menu. Navigate to the "Pairing" icon and press the "OK" button to initiate manual pairing.

Display and Settings
- 4.3-inch HD 1080p IPS Screen: Provides a clear, full-color view of your baby.
- Night Vision: Equipped with 940nm non-flashing infrared lights for clear viewing in dark conditions without disturbing your baby.
- Brightness/Contrast Adjustment: Access the monitor's menu to adjust screen brightness and contrast for optimal viewing in various lighting conditions, including dimming for night driving.
- Mirroring Function: The monitor supports mirroring, allowing you to adjust the image orientation as needed.
- Battery Indicator: The monitor displays its remaining power directly on the screen. The camera's remaining power is indicated by light colors as described in the manual (refer to the physical manual for specific light color meanings).

Maintenance
- Cleaning: Use a soft, dry cloth to clean the monitor screen and camera lens. Avoid abrasive cleaners or solvents.
- Storage: When not in use for extended periods, store the device in a cool, dry place. Ensure both units are fully charged before storage to maintain battery health.
- Battery Care: To prolong battery life, avoid fully discharging the batteries frequently. Recharge them regularly.
- Environmental Conditions: Avoid exposing the device to extreme temperatures, direct sunlight for prolonged periods, or excessive moisture.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No image on monitor / Disconnection |
|
|
| Image is unclear or distorted |
|
|
| Short battery life |
|
|
Specifications
| Feature | Detail |
|---|---|
| Model Number | ACZ412 |
| Monitor Display Size | 4.3 inches |
| Video Capture Resolution | 1080p HD |
| Connectivity Technology | 2.4GHz Wireless |
| Wireless Range | Up to 1000FT (open space) |
| Monitor Battery Capacity | 3000mAh |
| Camera Battery Capacity | 2000mAh |
| Battery Life (Fully Charged) | Up to 5 hours |
| Special Features | Night Vision (940nm non-flashing IR), 360° Rotatable Camera, Adjustable Suction Cup Holder |
| Field Of View | 149 Degrees |
| Product Dimensions | 3.5 x 5 x 8 inches |
| Item Weight | 1.65 pounds |
Warranty and Support
Itomoro provides a Three-Year Replacement Service for this product. For any issues or inquiries, please contact our customer support.
To contact the seller on Amazon:
- Go to your Amazon order history.
- Locate your purchase of the Itomoro Wireless Baby Car Camera.
- Click on the seller's name (e.g., "zhongzuoxintong").
- Select "Ask a question" to send a message to the seller for support.
![Diagram showing steps to contact seller on Amazon: 1. Find 'Sold by [Seller Name]', 2. Click 'Ask a question', 3. Choose 'An order I have placed' or 'An item for sale'.](Itomoro%20Wireless%20Baby%20Car%20Camera,%20Rechargeable%20Car%20Baby%20Monitor%20with%204.3%22%20HD%201080P%20Night%20Vision%20Display,%20Backseat%20Mirror%20for%20Kids%20Max%20Range%201000FT,%20Easy%20Installation%20360%20Rotatable%20Rear%20Facing%20Camera_image_15.jpg)