Introduction
Thank you for choosing the Tiskgg 29.53" Tall Fireproof Wall Safe. This manual provides essential information for the proper installation, operation, and maintenance of your new wall safe. Please read these instructions carefully before use to ensure optimal security and functionality.
This wall safe is designed to fit between standard 16-inch on-center wall studs, offering a discreet and secure storage solution for your valuables, documents, and personal items. Its robust construction and combination lock provide enhanced protection against theft and fire.
Safety Information
- Do not store emergency keys inside the safe. Always keep emergency keys in a secure location separate from the safe.
- Ensure the safe is securely mounted to wall studs as per installation instructions to prevent unauthorized removal.
- Keep the combination private and do not share it with unauthorized individuals.
- Regularly check the battery level of the electronic lock to ensure continuous operation.
- This safe is designed to deter theft and provide fire resistance. It is not impervious to all forms of attack or extreme fire conditions.
Image: The Tiskgg wall safe shown in a home environment, emphasizing its role in securing valuables from children or potential intruders.
Package Contents
Please verify that all items are present in the package:
- Tiskgg 29.53" Tall Fireproof Wall Safe
- Emergency Keys (2)
- Removable Shelves (3)
- Mounting Hardware (Expansion bolts)
- Instruction Manual
Setup and Installation
Wall Mounting
This wall safe is designed for installation between standard 16-inch on-center wall studs. Professional installation is recommended.
- Locate Studs: Use a stud finder to locate two adjacent wall studs that are 16 inches apart on center. Mark the outline of the safe's body on the drywall between these studs.
- Cut Opening: Carefully cut out the marked section of drywall. Ensure the opening is precise to allow for a snug fit.
- Insert Safe: Slide the safe into the wall opening. The front flange of the safe should sit flush against the wall surface.
- Secure Safe: Open the safe door. Using the pre-drilled holes inside the safe, drill pilot holes into the wall studs. Secure the safe to the studs using the provided expansion bolts. Ensure all bolts are tightened securely.
- Concealment: For optimal concealment, the flush-mounted safe can be hidden behind framed artwork or a mirror.
Image: Visual guide for wall mounting the safe, demonstrating how to bolt it to the wall and conceal it with artwork.
Initial Access
Upon first use, the safe must be opened with the emergency keys.
- Locate the badge covering the emergency keyhole on the electronic lock panel.
- Remove the badge to expose the keyhole.
- Insert one of the emergency keys and turn it clockwise while simultaneously turning the knob counter-clockwise to open the safe door.
- Once open, install the batteries (not included) into the battery compartment located inside the door.
Operating Instructions
Setting the Combination
To set your personal combination:
- With the safe door open, press the red reset button located on the inside of the door, near the hinge. The indicator light on the keypad will flash.
- Enter your desired 3-8 digit code on the keypad.
- Press the '#' or 'B' button to confirm. The indicator light will stop flashing, confirming the new code is set.
- Test the new combination with the door open before closing it.
Opening the Safe
To open the safe using your combination:
- Enter your 3-8 digit combination on the keypad.
- Press the '#' or 'B' button. If the code is correct, the indicator light will turn green.
- Within 5 seconds, turn the knob counter-clockwise to open the safe door.
Image: Instructions for opening the safe using the electronic combination or the emergency key.
Using the Removable Shelves
The safe includes three removable shelves to customize the interior storage space.
- To install a shelf, align its tabs with the desired slots on the interior side walls and slide it into place.
- To remove a shelf, lift it slightly and pull it out from the slots.
Image: The safe's interior with and without shelves, highlighting the removable shelf feature for flexible storage.
Hidden Compartment
A discreet 'false bottom' compartment is located at the base of the safe, providing additional hidden storage for small, valuable items such as cash, jewelry, or small firearms.
- To access, lift the false bottom panel inside the safe.
- To close, lower the panel back into place until it sits flush.
Image: A view of the hidden compartment located at the bottom of the safe, designed for extra security.
Maintenance
- Battery Replacement: When the battery is low, the indicator light may flash red or the keypad may not respond. Replace the batteries (AA size, quantity specified in specifications) by opening the battery compartment inside the door.
- Cleaning: Wipe the exterior of the safe with a soft, damp cloth. Avoid abrasive cleaners or solvents that could damage the finish.
- Lock Mechanism: Do not lubricate the electronic lock or key mechanism. If the lock becomes stiff, contact customer support.
Troubleshooting
- Safe will not open with combination:
- Ensure batteries are not depleted. Replace if necessary.
- Re-enter the combination carefully.
- If the combination is forgotten, use the emergency key to open the safe.
- Keypad not responding:
- Check battery installation and replace batteries.
- Ensure no debris is obstructing the buttons.
- Door will not close properly:
- Check for any obstructions inside the safe or around the door frame.
- Ensure the locking bolts are fully retracted before attempting to close.
Specifications
| Feature | Detail |
|---|---|
| Brand | Tiskgg |
| Model Number | 75 |
| Exterior Dimensions (H x D x W) | 29.53" x 3.94" x 14.57" (75cm x 10.01cm x 37cm) |
| Lock Type | Electronic Combination Lock with Emergency Key |
| Material | Alloy Steel |
| Color | White |
| Mounting Type | Wall Mount (between 16" on-center studs) |
| Special Features | Anti-Theft, Fireproof, Hidden Compartment, Removable Shelves |
| Item Weight | 16.33 Kilograms |
Image: Detailed dimensions of the Tiskgg wall safe, including height, depth, and width.
Warranty and Support
For warranty information or technical support, please contact Tiskgg customer service. Refer to your purchase documentation for specific warranty terms and contact details. Our support team is available to assist you with any questions or issues you may encounter.
Contact Information: Please refer to the contact details provided with your product packaging or on the official Tiskgg website.