PEXMOR 14" Folding Commuter City Electric Bicycle User Manual

1. Important Safety Information

Read this manual thoroughly before operating the PEXMOR Electric Bicycle. Failure to follow instructions and safety guidelines may result in serious injury or damage to the product. Retain this manual for future reference.

General Safety Precautions

• Always wear a helmet and appropriate safety gear when riding.
• Ensure all components are securely fastened and in good working order before each ride.
• Comply with all local traffic laws and regulations.
• Do not ride under the influence of alcohol or drugs.
• Avoid riding in adverse weather conditions, such as heavy rain or snow.
• The electric bicycle is designed for adults and teens. Ensure the rider meets the recommended height and weight limits.
• This product complies with UL2849 standards for electrical systems for e-bikes.

Battery Safety

• Use only the charger provided with the bicycle.
• Do not expose the battery to extreme temperatures or direct sunlight.
• Do not puncture, drop, or disassemble the battery.
• Charge the battery in a well-ventilated area, away from flammable materials.

2. Setup and Assembly

The PEXMOR Electric Bicycle comes partially assembled. Follow these steps to complete the setup.

Unfolding the Bicycle

1. Carefully remove the bicycle from its packaging.
2. Locate the main frame hinge and release the safety latch.
3. Unfold the frame until it locks into place. Secure the safety latch.
4. Raise the handlebar stem and secure its locking mechanism.
5. Unfold the pedals if they are in a folded position.

Figure 2.1: The PEXMOR Electric Bicycle shown in both its folded and unfolded configurations, illustrating its compact design for storage and transport.

Adjusting the Seat

• Loosen the quick-release lever on the seat post.
• Adjust the seat height to a comfortable position where your feet can touch the ground while seated.
• Securely tighten the quick-release lever.

Figure 2.2: This diagram illustrates the adjustable seat height range (27.5-33.5 inches / 70-85 cm) and overall dimensions of the PEXMOR Electric Bicycle, along with recommended rider height.

Figure 2.3: A detailed view of the adjustable ergonomic seat, highlighting its design for rider comfort and customization.

Initial Battery Charge

Before your first ride, fully charge the battery. Connect the charger to the charging port on the bicycle and then to a power outlet. The indicator light on the charger will change when charging is complete.

3. Operating Instructions

Familiarize yourself with the controls and riding modes of your PEXMOR Electric Bicycle.

Powering On/Off and LED Display

• To power on the bicycle, press and hold the power button on the handlebar-mounted LED display.
• The LED display shows battery level, current speed, and ride metrics.
• To power off, press and hold the power button again.

Figure 3.1: A detailed view of the smart handle control, featuring the LED display that provides real-time information such as battery level and speed.

Riding Modes

The bicycle offers three distinct riding modes:

• Ordinary Bicycle Mode: No electrical assistance. Ride as a traditional bicycle for exercise.
• PAS (Pedal-Assist System) Mode: Provides 5 levels of electrical assistance as you pedal. Ideal for extending range and reducing effort.
• Electric Mode: Full electric power, no pedaling required. Use the throttle for effortless commuting.

Switch between modes using the controls on the handlebar. The 36V 6Ah lithium battery provides approximately 20-30 km range in PAS mode and 20±3 km in pure electric mode.

Figure 3.2: This image illustrates the 36V/6AH lithium battery and the three available riding modes: Ordinary Bicycle, PAS Mode, and Electric Mode, along with their respective ranges.

Braking System

The PEXMOR Electric Bicycle is equipped with front and rear dual disc brakes for reliable stopping power.

• Apply both brake levers simultaneously for optimal and controlled stopping.
• The brake-activated tail light will illuminate upon braking, enhancing visibility to others.

Figure 3.3: A close-up view of the front and rear dual disc brakes, designed for enhanced control and shorter stopping distances.

Motor Operation

The 350W high-speed brushless motor (peak 500W) provides assistance up to 15.5 mph (25 km/h) and offers good climbing performance.

Figure 3.4: This diagram highlights the 350W high-speed brushless motor, its climbing capacity, maximum speed of 15.5 mph, and the bike's load capacity of 265 lbs.

4. Maintenance

Regular maintenance ensures the longevity and safe operation of your electric bicycle.

General Care

• Keep the bicycle clean. Wipe down the frame with a damp cloth. Avoid using high-pressure washers directly on electrical components.
• Regularly check all bolts and fasteners for tightness.
• Lubricate the chain periodically with bicycle chain lubricant.

Tire Maintenance

• Check tire pressure before each ride. Maintain pressure within the recommended range printed on the tire sidewall.
• Inspect tires for wear, cuts, or embedded objects.

Figure 4.1: A close-up of the durable, wear-resistant rubber tire, designed to adapt to various terrains including beach, gravel, and flat roads.

Battery Care

• Charge the battery regularly, even if the bicycle is not in use, to maintain its health.
• Store the battery in a cool, dry place.
• If storing for an extended period, charge the battery to approximately 50-70% capacity.

5. Troubleshooting

This section addresses common issues you might encounter with your PEXMOR Electric Bicycle.

No Power

• Check Battery Charge: Ensure the battery is fully charged.
• Check Connections: Verify that the battery is properly seated and all electrical connections are secure.
• Power Button: Ensure the power button on the LED display is pressed and held correctly to turn on the system.

Motor Not Assisting

• Check Riding Mode: Ensure the bicycle is in PAS mode or Electric mode, not Ordinary Bicycle mode.
• Pedal-Assist Sensor: In PAS mode, ensure you are pedaling for the motor to engage.
• Brake Levers: Some e-bikes have safety cut-off switches on the brake levers. Ensure brake levers are not partially engaged.

Brakes Squealing or Ineffective

• Brake Pad Wear: Inspect brake pads for wear. Replace if necessary.
• Disc Alignment: Check if the brake discs are clean and not warped.
• Adjustment: Brake cables may need adjustment. Consult a bicycle mechanic if unsure.

6. Specifications

Detailed technical specifications for the PEXMOR 14" Folding Commuter City Electric Bicycle, Model 08-WH.

7. Warranty and Support

Warranty Information

Specific warranty details for the PEXMOR Electric Bicycle Model 08-WH are not provided in the available product information. Please refer to your purchase documentation or contact the retailer for warranty terms and conditions.

Customer Support

For technical assistance, parts, or further inquiries, please contact PEXMOR customer support through their official website or the retailer from whom you purchased the product. Always provide your model number (08-WH) and purchase date when seeking support.

You can visit the PEXMOR Store for more information: PEXMOR Store on Amazon