1. Introduction
Thank you for choosing the Nilox NXM22FHD1201 monitor. This 22-inch VA Full HD (1920x1080) monitor is designed to provide an immersive visual experience for both entertainment and work. Featuring a 120Hz refresh rate and a 4ms response time, it offers smooth and reactive performance, ideal for gaming. The monitor also incorporates eye care technology to reduce blue light emissions and minimize flickering, ensuring visual comfort during extended use. With HDMI connectivity and VESA mount compatibility, it integrates seamlessly into various setups.
Figure 1.1: Nilox NXM22FHD1201 Monitor Front View
2. Safety Information
Please read all instructions carefully before using the monitor. Keep this manual for future reference.
- Do not place the monitor near water or in humid environments.
- Ensure proper ventilation around the monitor to prevent overheating.
- Use only the power adapter and cables provided or recommended by Nilox.
- Avoid exposing the monitor to direct sunlight or extreme temperatures.
- Do not attempt to disassemble or repair the monitor yourself. Refer all servicing to qualified personnel.
- Clean the screen with a soft, lint-free cloth. Avoid using abrasive cleaners or solvents.
3. Package Contents
Verify that all items are present in the package:
- Nilox NXM22FHD1201 Monitor
- Monitor Stand (Base and Neck)
- Power Cable or Connector
- HDMI Cable
- Instruction Manual
4. Setup
4.1 Assembling the Monitor Stand
- Carefully remove the monitor from its packaging, placing it face down on a soft, clean surface to prevent scratches.
- Attach the stand neck to the back of the monitor by aligning the tabs and pushing firmly until it clicks into place.
- Attach the stand base to the stand neck. Secure it with the captive screw located at the bottom of the base.
Figure 4.1: Monitor Stand Assembly
4.2 VESA Wall Mount Installation (Optional)
The monitor supports VESA 75x75mm mounting. If you plan to wall mount the monitor, remove the stand neck (if already attached) and follow the instructions provided with your VESA-compatible wall mount kit. Ensure the mounting screws are of appropriate length and thread type for the VESA standard.
Figure 4.2: Monitor Dimensions and VESA Mount Area
4.3 Connecting the Monitor
The monitor features HDMI and VGA input ports. Choose the appropriate cable for your device.
- HDMI Connection: Connect one end of the HDMI cable to the HDMI port on your computer or video source and the other end to the HDMI port on the monitor.
- VGA Connection: Connect one end of the VGA cable to the VGA port on your computer or video source and the other end to the VGA port on the monitor. Secure the VGA cable with the screws on the connector.
- Power Connection: Connect the power cable to the monitor's power input and then plug the other end into a power outlet.
Figure 4.3: Monitor Rear Panel with Ports
4.4 Powering On
Press the power button located on the monitor to turn it on. The power indicator light will illuminate. If no image appears, ensure all cables are securely connected and the correct input source is selected.
5. Operating the Monitor
5.1 On-Screen Display (OSD) Controls
The monitor features control buttons, typically located on the bottom or back panel, to access and navigate the On-Screen Display (OSD) menu. These buttons allow you to adjust various settings.
5.2 Adjusting Settings
Use the OSD menu to customize your viewing experience:
- Picture Settings: Adjust brightness, contrast, sharpness, and gamma.
- Color Settings: Modify color temperature, hue, and saturation.
- Input Select: Manually switch between HDMI and VGA input sources.
- Audio Settings: Adjust volume (if external speakers are connected via audio out, as this monitor does not have built-in speakers).
- OSD Settings: Change OSD language, transparency, and timeout.
- Eye Care Features: Activate or adjust settings for blue light reduction and flicker-free technology to minimize eye strain.
- Reset: Restore all settings to factory defaults.
6. Maintenance
6.1 Cleaning the Monitor
- Always unplug the monitor from the power outlet before cleaning.
- Use a soft, dry, lint-free cloth to gently wipe the screen and exterior surfaces.
- For stubborn marks, lightly dampen the cloth with water or a mild, non-abrasive screen cleaner. Do not spray liquid directly onto the screen.
- Avoid using benzene, thinner, ammonia-based cleaners, or abrasive pads, as these can damage the monitor's surface.
6.2 Storage
If storing the monitor for an extended period, disconnect all cables, clean it thoroughly, and pack it in its original packaging or a suitable protective container to prevent dust and damage.
7. Troubleshooting
If you encounter issues with your monitor, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No image on screen | Power cable disconnected; Video cable disconnected; Incorrect input source selected; Monitor is off. | Ensure power and video cables are securely connected. Press the power button. Use the OSD menu to select the correct input source (HDMI/VGA). |
| Image is blurry or distorted | Incorrect resolution; Loose video cable. | Set your computer's display resolution to 1920x1080. Ensure the video cable is firmly connected. |
| Monitor turns off unexpectedly | Power saving mode activated; Loose power connection; Overheating. | Check power cable connection. Disable power saving features in your computer's settings. Ensure adequate ventilation around the monitor. |
| Flickering screen | Refresh rate mismatch; Faulty cable. | Ensure your computer's refresh rate is set to 120Hz. Try a different video cable. |
| No sound (if external speakers are connected) | Volume too low; Incorrect audio output selected on PC. | Adjust volume via OSD or PC. Ensure PC audio output is set to the monitor or connected speakers. |
If the problem persists after trying these solutions, please contact customer support.
8. Specifications
| Feature | Specification |
|---|---|
| Model Number | NXM22FHD1201 |
| Screen Size | 21.5 Inches |
| Panel Type | VA |
| Resolution | 1920 x 1080 (FHD 1080p) |
| Aspect Ratio | 16:9 |
| Refresh Rate | 120 Hz |
| Response Time | 4 Milliseconds |
| Brightness | 250 cd/m2 |
| Contrast Ratio | 1000:1 |
| Viewing Angle | 178 Degrees |
| Display Surface | Matte |
| Video Inputs | 1x HDMI, 1x VGA |
| Adaptive Sync | FreeSync |
| Special Features | Eye Care Technology (Safe) |
| VESA Compatibility | 75x75 mm |
| Dimensions (DxWxH) | 17.3 x 49.3 x 35.8 cm |
| Weight | 5.9 kg |
| Power Voltage | 28 Volts |
9. Warranty Information
The Nilox NXM22FHD1201 monitor comes with a 3-year warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or external factors. Please retain your proof of purchase for warranty claims.
10. Support
For technical assistance, warranty claims, or further inquiries, please contact Nilox customer support through their official website or the contact information provided with your product documentation. When contacting support, please have your monitor's model number (NXM22FHD1201) and proof of purchase readily available.