1. Introduction
This manual provides essential instructions for the assembly, setup, operation, and maintenance of your Omethey 15-20 Fingerprint Gun Safe. Please read this manual thoroughly before attempting to assemble or operate the safe to ensure proper function and safety. Keep this manual for future reference.
Image 1.1: The Omethey 15-20 Fingerprint Gun Safe with its door open, revealing the spacious interior designed for rifles, pistols, and accessories. The door features organized storage pouches.
2. Safety Information
- Always store firearms unloaded and separate from ammunition.
- Keep emergency keys and USB Type-C cable in a secure location outside the safe. Do not store them inside the safe.
- Ensure the safe is securely mounted to the floor or wall using the provided anchor bolts to prevent unauthorized removal or tipping.
- Keep children and unauthorized individuals away from the safe and its contents.
- Do not attempt to force the safe open if it malfunctions. Refer to the troubleshooting section or contact customer support.
3. Package Contents
Verify that all components are present before beginning assembly:
- 1 x Omethey 15-20 Large Unassembled Gun Safe (panels and door)
- 2 x Emergency Keys
- 4 x Expansion Screws (for mounting)
- 1 x USB Type-C Cable (for emergency power)
- 1 x Suction Magnetic Light
- 3 x Magnetic Gun Supports
- 1 x User Manual (this document)
4. Specifications
| Feature | Detail |
|---|---|
| Brand | Omethey |
| Model Number | AKG5-132D |
| Product Dimensions (D x W x H) | 17.72" x 22.83" x 51.96" |
| Lock Type | Electronic Combination Lock, Fingerprint, Key |
| Material | Alloy Steel |
| Capacity | 15-20 Rifles/Pistols (adjustable) |
| Special Features | Dual Alarm System, Silent Mode, Magnetic Induction Light, Adjustable/Removable Shelves, Magnetic Gun Supports |
| Mounting Type | Floor Mount (anchor bolts included) |
| Item Weight | 99.5 Pounds |
Image 4.1: Dimensional diagram illustrating the safe's exterior and interior measurements, along with examples of firearm and accessory storage.
5. Assembly Instructions
The Omethey 15-20 Gun Safe is shipped unassembled. Follow these steps carefully for proper assembly. An electric drill is recommended to expedite the process.
Image 5.1: Visual guide detailing the eight steps for assembling the gun safe, from installing side panels to securing the door and internal shelving.
- Left Plate Installation: Attach the left side panel to the back panel using the provided screws.
- Right Plate Installation: Attach the right side panel to the back panel using the provided screws.
- Door Installation: Carefully attach the door assembly to the side panels, ensuring the hinges are correctly aligned and secured.
- Top Plate Installation: Secure the top panel to the assembled side and back panels.
- Bottom Plate and Ammo Box Installation: Install the bottom plate. If applicable, integrate the ammo box or base storage component.
- Mount the Cabinet: Once assembled, position the safe in its desired location. Use the expansion screws to bolt the safe to the floor or wall through the pre-drilled holes for enhanced security.
- Shelf and Gun Support Installation: Install the removable and adjustable shelves as desired. Attach the magnetic gun supports to accommodate your firearms.
- Assembled Installation: Verify all connections are secure and the safe operates correctly.
Image 5.2: Illustration of the adjustable and removable shelves, demonstrating how they can be configured to store various firearm lengths and accessories.
Image 5.3: Close-up of the adjustable magnetic gun supports, which can be repositioned to fit different firearm sizes.
6. Setup
6.1 Initial Power-Up and Battery Installation
The safe requires batteries for the electronic lock. Install 4 AA batteries (not included) into the battery compartment located on the inside of the door. Ensure correct polarity.
6.2 Setting a User Password
To set your personal password (3-12 digits):
- With the door open, press the internal reset button.
- Enter your desired 3-12 digit password on the keypad.
- Press the '#' key to confirm. The safe will emit a confirmation tone.
6.3 Registering Fingerprints
The safe can store up to 20 unique fingerprints:
- With the door open, press the internal reset button.
- Place your finger on the fingerprint scanner. The indicator light will flash.
- Lift and place your finger repeatedly (typically 5-8 times) at different angles until the safe confirms successful registration with a tone.
- Repeat for additional fingerprints.
Image 6.1: Close-up view of the safe's electronic lock, showing the fingerprint scanner, keypad, and emergency power port.
7. Operating Instructions
7.1 Unlocking Methods
Your Omethey safe offers four primary ways to unlock:
Image 7.1: Visual representation of the four unlocking methods available for the safe.
- Fingerprint + Knob (Daily Use): Place your registered finger on the scanner, then turn the knob to open.
- Password + Knob (Daily Use): Enter your 3-12 digit password, then turn the knob to open.
- Key + Knob (Emergency/Forget Password): Insert the emergency key into the hidden keyhole, turn it, then turn the knob to open.
- USB Type-C Cable + Password/Fingerprint + Knob (Battery Depleted): If batteries are dead, connect a USB Type-C cable to an external power source, then use either fingerprint or password to unlock, and turn the knob.
7.2 Dual Alarm System and Silent Mode
The safe is equipped with advanced security features:
Image 7.2: Depiction of the dual alarm system and silent mode functionality.
- Vibration Alarm: Triggered if the safe is shaken or moved forcefully.
- Input Error Alarm: Activates after 3 consecutive incorrect password or fingerprint attempts.
- Silent Mode: To activate silent mode, press '#' to wake up the keypad, then press '1' twice. This disables keypad tones for discreet operation.
7.3 Magnetic Induction Light
The included magnetic induction light provides illumination inside the safe, making it easier to access contents in low-light conditions. Attach it to any magnetic surface inside the safe.
Image 7.3: The magnetic light providing illumination inside the safe.
8. Maintenance
- Battery Replacement: Replace batteries when the low battery indicator appears on the keypad. Use 4 new AA alkaline batteries.
- Cleaning: Wipe the exterior and interior of the safe with a soft, damp cloth. Avoid abrasive cleaners or solvents.
- Regular Checks: Periodically check the mounting bolts for tightness and ensure the door mechanism operates smoothly.
9. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Safe does not open with fingerprint/password. | Low batteries, incorrect input, unregistered fingerprint. | Replace batteries, re-enter password/fingerprint carefully, re-register fingerprint, or use emergency key/USB power. |
| Keypad is unresponsive. | Dead batteries. | Connect USB Type-C cable to an external power source for temporary power, then replace internal batteries. |
| Alarm sounds unexpectedly. | Safe was moved/vibrated, or incorrect code entered multiple times. | Ensure safe is stable. Enter correct password/fingerprint to disarm. |
| Door does not close properly. | Obstruction, misaligned door. | Check for obstructions. Ensure safe is on a level surface. Re-check assembly if recently moved. |
10. Warranty and Support
Omethey provides 7x24h customer service for any questions regarding product assembly or operation. Please contact us if you encounter any issues or require assistance.
For warranty information, please refer to the documentation included with your purchase or contact Omethey customer support directly.
Contact Information: Refer to your purchase receipt or the Omethey official website for the most current customer service contact details.
