Lynnoland MP250061P6

Lynnoland 36-Inch 6-Light Chandelier Instruction Manual

Model: MP250061P6

Brand: Lynnoland

Introduction

Thank you for choosing the Lynnoland 36-Inch 6-Light Chandelier. This fixture is designed to provide elegant and functional lighting for your dining room, kitchen, or other living spaces. Featuring an oil-rubbed bronze finish and white fabric shades, this chandelier arrives largely pre-assembled for a straightforward installation process. Please read this manual thoroughly before installation and use to ensure safe and proper operation.

Safety Information

  • WARNING: To avoid electric shock, ensure power is turned off at the circuit breaker before installation or servicing.
  • All electrical connections must be in accordance with local codes, ordinances, and the National Electric Code (NEC).
  • Consult a qualified electrician if you are unsure about the installation process.
  • Use only E26 base bulbs, maximum 60 watts per bulb. Do not exceed the recommended wattage.
  • Do not install this fixture in wet or damp locations. This product is for indoor use only.
  • Handle the fabric shades with care to prevent damage.

Package Contents

Verify that all parts are present before beginning installation:

  • Chandelier Body with pre-assembled arms and shades
  • Mounting Hardware (Canopy, Mounting Plate, Screws, Wire Nuts)
  • Down Rods (various lengths for adjustable height)
  • Instruction Manual

Note: E26 light bulbs are not included and must be purchased separately.

Setup and Installation

This chandelier is designed for quick and effortless installation, arriving largely pre-assembled. Follow these steps for proper setup:

  1. Turn Off Power: Before starting, ensure the power to the installation area is completely off at the main circuit breaker.
  2. Prepare Mounting: Attach the mounting plate to your ceiling's electrical box using the provided screws. Ensure it is securely fastened.
  3. Adjust Height: Select the appropriate length of down rods to achieve your desired hanging height. Connect the down rods to the chandelier body and the canopy.
  4. Wiring: Carefully connect the electrical wires from the chandelier to the corresponding wires in the ceiling box (usually black to black, white to white, and ground to ground) using the provided wire nuts. Ensure all connections are secure.
  5. Secure Canopy: Push the canopy up against the ceiling, covering the electrical box and mounting plate. Secure it in place with the provided screws or nuts.
  6. Install Bulbs: Screw E26 base bulbs (not included, max 60W) into each of the 6 sockets.
  7. Restore Power: Once installation is complete and all connections are secure, turn the power back on at the circuit breaker.
Lynnoland 6-Light Chandelier installed in a dining room

The Lynnoland 6-Light Chandelier installed, showcasing its design and illumination.

Detailed view of the chandelier's pre-assembled arms and shades

A close-up of the chandelier highlighting its pre-assembled components and fabric shades.

Official product video demonstrating the Lynnoland 36-inch Oil-Rubbed Dining Room Light Fixture.

Operating Instructions

The Lynnoland 6-Light Chandelier operates via a standard wall switch. For enhanced control over lighting ambiance, this fixture is compatible with dimmer switches (not included). Ensure that any dimmer switch used is compatible with the type of E26 bulbs installed.

Maintenance

  • Cleaning: To clean the fixture, turn off the power and allow it to cool. Wipe the metal parts with a soft, dry cloth. For the fabric shades, use a soft brush or a lint roller to remove dust. Do not use abrasive cleaners or solvents.
  • Bulb Replacement: Ensure the power is off and the bulbs have cooled before replacing. Unscrew the old bulb and screw in a new E26 base bulb (max 60W).

Troubleshooting

ProblemPossible CauseSolution
Light does not turn on1. Power is off
2. Loose wiring
3. Faulty bulb
1. Check circuit breaker and wall switch
2. Verify all wire connections are secure (power off first)
3. Replace bulb
Lights flicker1. Loose bulb
2. Incompatible dimmer
3. Loose wiring
1. Tighten bulbs
2. Ensure dimmer is compatible with bulbs
3. Check wire connections (power off first)

Specifications

FeatureDetail
BrandLynnoland
Model NumberMP250061P6
ColorOil-Rubbed Bronze + White Shade
MaterialFabric, Metal
Light Fixture FormChandelier
Room TypeBedroom, Dining Room, Hallway, Kitchen
Indoor/Outdoor UsageIndoor
Power SourceCorded Electric
Number of Light Sources6
Voltage120 Volts
Wattage (Max per bulb)60 watts
Bulb BaseE26
Brightness1200 lumen (total, with appropriate bulbs)
Mounting TypeCeiling Mount (Semi Flush Mount)
Required AssemblyNo (pre-assembled)
Item Dimensions (L x W x H)23.62"L x 13.98"W x 17.72"H (Fixture body, excluding down rods)
Size36-Inch (overall width)

Warranty and Support

This Lynnoland chandelier comes with a 36-month warranty and technical support. Should you encounter any issues or require assistance, please refer to your purchase platform to contact the seller directly. A response will typically be provided within 24 hours to help resolve any problems. Customer satisfaction is a priority.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.