Introduction
This manual provides essential information for the safe operation, maintenance, and troubleshooting of your Ausom Electric Scooter. Please read this manual thoroughly before your first ride to ensure proper use and to maximize the lifespan of your scooter.
Key Features:
- 15.6Ah Battery for extended range
- Up to 70km Max Range
- LED Touch Display for easy monitoring
- E-ABS + Front & Rear Disc Brakes for reliable stopping power
- 10 inch Vacuum Tubeless Tires for a smooth ride
- 130kg Max Load capacity
- Enhanced Suspension for improved comfort
Safety Guidelines
Always prioritize safety when operating the electric scooter. Failure to follow safety guidelines can result in injury or damage to the scooter.
- Wear a helmet and appropriate protective gear (knee pads, elbow pads) at all times.
- Ensure all bolts and quick releases are securely fastened before each ride.
- Do not ride in heavy rain, snow, or icy conditions.
- Adhere to local traffic laws and regulations.
- Maintain a safe distance from other vehicles and pedestrians.
- Avoid riding under the influence of alcohol or drugs.
- Do not perform stunts or aggressive maneuvers.
- The maximum load capacity is 130 kg. Do not exceed this limit.
Setup and Assembly
Your Ausom Electric Scooter comes partially assembled. Follow these steps to prepare it for its first use.
- Unboxing: Carefully remove the scooter and all accessories from the packaging. Retain packaging for future storage or transport.
- Handlebar Installation:
Lift the handlebar stem to its upright position. Secure the folding mechanism latch. Attach the handlebars to the stem, ensuring all cables are not pinched. Tighten any screws as per the included quick start guide.
- Initial Charge: Before first use, fully charge the scooter's battery.
- Locate the charging port, usually near the battery compartment.
- Connect the charger to the scooter, then plug it into a power outlet.
- The charging indicator on the charger will change (e.g., red to green) when fully charged.
- Do not overcharge the battery.
- Pre-Ride Inspection:
- Check tire pressure.
- Verify brake functionality (front and rear).
- Ensure all lights (headlight, taillight, turn signals) are working.
- Confirm the folding mechanism is securely locked.
Image: Ausom Electric Scooter with key dimensions (length 1250mm/49.2in, height 1380mm/54.3in, handlebar width 680mm/27in, folded height 560mm/22in).
Image: Ausom Electric Scooter shown next to a person for scale, illustrating its dimensions (138cm height, 125cm length) and folded dimensions (56cm height, 54cm length, 68cm width).
Operating Instructions
- Power On/Off: Press and hold the power button on the LED Touch Display to turn the scooter on or off.
- LED Touch Display: The display shows speed, battery level, riding mode, and other vital information. Refer to the quick start guide for specific display functions and settings adjustments.
- Acceleration: Gently press the throttle lever to accelerate. Start slowly and gradually increase speed.
- Braking: Use the brake levers on the handlebars to engage the E-ABS and disc brakes. Apply both brakes simultaneously for optimal stopping power.
- Folding and Unfolding:
The scooter features a double folding system for quick storage and transport. To fold, disengage the safety latch and release the folding mechanism near the base of the handlebar stem. Carefully fold the stem down until it locks into place with the rear fender. To unfold, reverse the process, ensuring the stem is fully upright and the safety latch is engaged before riding.
Image: Illustration of the Ausom Electric Scooter's double folding system, showing the handlebar stem folding down towards the deck for compact storage.
- Lighting System: The scooter is equipped with a comprehensive lighting system for enhanced visibility.
- Headlight: Located at the front, provides illumination for night riding.
- Turn Signal Lights: For indicating turns, located on the sides.
- Taillight: Located at the rear, improves visibility from behind.
Image: Ausom Electric Scooter highlighting its lighting system: (1) Headlight, (2) Turn Signal Lights, and (3) Taillight, demonstrating enhanced visibility.
- Other Features:
Image: Close-up views of the Ausom Electric Scooter's additional features, including enhanced suspension, stable kickstand, anti-slip wide deck, ergonomic handle, turn signal button, and horn button, along with the LED display.
- Enhanced Suspension: Provides a smoother ride over varied terrain.
- Stable Kickstand: For convenient parking.
- Anti-Slip Wide Deck: Offers stable footing during rides.
- Ergonomic Handle: Designed for comfortable grip.
- Horn: For alerting others.
Maintenance
Regular maintenance ensures the longevity and safe operation of your scooter.
- Battery Care:
- Charge the battery regularly, even if not in use, to maintain battery health.
- Avoid completely draining the battery.
- Store the scooter in a cool, dry place, away from direct sunlight and extreme temperatures.
- Tire Maintenance:
- Check tire pressure before each ride. Maintain recommended PSI for optimal performance and safety.
- Inspect tires for wear, punctures, or damage.
- Brake System:
- Regularly check brake levers, cables, and disc brakes for proper function and wear.
- Adjust brakes as needed to ensure responsive stopping.
- Cleaning:
- Wipe down the scooter with a damp cloth. Avoid using high-pressure water or harsh chemicals.
- Do not submerge the scooter in water.
- Fasteners: Periodically check and tighten all screws, bolts, and connections.
Troubleshooting
If you encounter issues with your scooter, refer to the following common problems and solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Scooter does not power on | Low or depleted battery; Loose battery connection; Faulty power button | Charge the battery fully; Check battery connections; Contact support if button is faulty |
| Reduced range or power | Under-inflated tires; Battery degradation; Riding uphill frequently; Heavy load | Inflate tires to recommended PSI; Ensure full charge; Adjust riding style; Reduce load |
| Brakes feel weak or unresponsive | Worn brake pads; Loose brake cable; Air in hydraulic system (disc brakes) | Inspect and replace brake pads; Adjust brake cable tension; Seek professional service for hydraulic brakes |
| Unusual noises during operation | Loose components; Debris in wheels/brakes; Motor issue | Inspect all fasteners; Clean wheels and brakes; Contact support for motor issues |
For issues not listed here or if troubleshooting steps do not resolve the problem, please contact Ausom customer support.
Specifications
| Feature | Detail |
|---|---|
| Brand | Ausom |
| Model Name | Ausom |
| Max Load Capacity | 120 Kilograms (264 lbs) |
| Frame Material | Aluminum |
| Wheel Size | 10 Inches |
| Wheel Material | Synthetic Rubber |
| Wheel Type | Pneumatic |
| Suspension Type | Full Suspension |
| Brake Type | Front and Rear Braking (E-ABS + Disc Brakes) |
| Handle Type | Non-slip |
| ASIN | B0FB3TMM73 |
Note: Specifications are subject to change without notice.
Warranty and Support
Warranty Information: For details regarding the warranty coverage for your Ausom Electric Scooter, please refer to the warranty card included with your purchase or contact your retailer.
Customer Support: If you have any questions, require technical assistance, or need to report an issue, please contact Ausom customer service.
- Visit the official Ausom website for support contact information.
- Refer to your purchase documentation for specific support channels.
