Introduction
The Havit Gamenote GK63 PRO is a professional USB gaming and streaming microphone designed for clear audio capture. It features a cardioid polar pattern to minimize background noise, RGB lighting for aesthetic appeal, and an easily accessible mute button. This manual provides instructions for the proper setup, operation, and maintenance of your GK63 PRO microphone.
Package Contents
- Havit Gamenote GK63 PRO Microphone
- Desk Stand (Boom Arm)
- Pop Filter
- 1.8m USB-A to Type-C Data Cable
- User Manual (this document)
Setup
Follow these steps to assemble and connect your Havit Gamenote GK63 PRO microphone.
- Attach the Desk Stand: Securely clamp the desk stand (boom arm) to the edge of your desk. Ensure it is stable and can support the microphone's weight.
- Mount the Microphone: Attach the GK63 PRO microphone to the boom arm. Ensure it is firmly screwed into place. Adjust the angle of the microphone for optimal positioning.
- Install the Pop Filter: Connect the pop filter to the boom arm and position it approximately 2-3 inches in front of the microphone's grille. This helps reduce plosive sounds (P, B, T).
- Connect the USB Cable: Plug the USB Type-C end of the provided 1.8m cable into the microphone. Connect the USB-A end to an available USB port on your desktop computer. No additional software or drivers are typically required for initial setup.
Operating Instructions
Once connected, your GK63 PRO microphone is ready for use. Follow these guidelines for optimal performance.
- Microphone Placement: Position the microphone directly in front of you, ideally 6-12 inches away, with the front of the microphone (where the grille is) facing your mouth. The cardioid pattern is designed to pick up sound primarily from this direction.
- Mute Function: The GK63 PRO features an easily accessible mute button on the microphone body. Press it once to mute the microphone (often indicated by a change in RGB lighting or an LED indicator) and press again to unmute.
- RGB Lighting: The microphone's RGB lighting provides a visual accent. Specific controls for RGB patterns or colors may be available directly on the microphone or through your computer's sound settings, depending on the operating system.
- System Audio Settings: Ensure the Havit Gamenote GK63 PRO is selected as the default input device in your computer's sound settings and any recording or streaming software you are using. Adjust input volume (gain) as needed to prevent clipping or low audio levels.
Maintenance
Proper care will extend the life and performance of your microphone.
- Cleaning: Use a soft, dry cloth to wipe the microphone body and stand. Do not use liquid cleaners or abrasive materials, as these can damage the finish or internal components.
- Storage: When not in use for extended periods, store the microphone in a clean, dry environment, away from extreme temperatures and humidity.
- Cable Care: Avoid sharp bends or kinks in the USB cable. Do not pull the cable to disconnect; always grasp the connector.
Troubleshooting
If you encounter issues with your GK63 PRO microphone, refer to the following common solutions.
-
No Sound Output:
- Ensure the USB cable is securely connected to both the microphone and your computer.
- Verify that the microphone is not muted (check the mute button/indicator).
- Check your computer's sound settings to confirm the GK63 PRO is selected as the input device and the input volume is not set to zero.
- Try connecting to a different USB port on your computer.
-
Poor Sound Quality (Static, Low Volume, Distorted):
- Adjust the microphone's distance from your mouth (6-12 inches is ideal).
- Ensure the pop filter is correctly positioned to reduce plosives.
- Check for background noise in your environment. The cardioid pattern helps, but cannot eliminate all noise.
- Adjust the input gain/volume in your computer's sound settings or recording software. Too high can cause distortion, too low can result in faint audio.
- Ensure the microphone is facing you correctly (front grille towards the sound source).
-
RGB Lighting Not Working:
- Ensure the microphone is properly connected via USB and receiving power.
- Check if there are any physical controls on the microphone for RGB lighting.
Specifications
| Model Name | GK63 PRO |
| Brand | havit |
| Connectivity Technology | USB (USB-A to Type-C) |
| Polar Pattern | Cardioid |
| Frequency Range | 50Hz - 18,000Hz |
| Microphone Size | Ø14*6.0mm±0.2mm |
| Sensitivity | -42±2dB |
| Maximum Sound Pressure Level | 110dB |
| Signal-to-Noise Ratio | ≥96dB |
| Chip | AP3800 (with advanced noise reduction) |
| Output Impedance | <2.2KΩ |
| Operating Voltage | 5V |
| Operating Current | ≤100mA |
| Sampling Rate and Depth | 192kHz / 24bit |
| Cable Length | 1.8m |
| Product Dimensions | 497 × 187 × 95 mm |
| Product Weight | 796g |
| Material | ABS + Metal |
| Recommended Use | Gaming, Streaming |
| Compatible Devices | Desktop Computer |
| Features | Mute Function, RGB Lighting |
Warranty Information
The Havit Gamenote GK63 PRO microphone comes with a 2-Year Distributor Warranty. Please retain your proof of purchase for warranty claims. This warranty covers manufacturing defects under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or normal wear and tear.
Support
For further assistance, product information, or to explore other Havit products, please visit the official Havit store:
You may also refer to the product's Amazon listing for additional details and customer reviews.