1. Introduction
Thank you for choosing the EDECOA 2000W Pure Sine Wave Inverter. This manual provides essential information for the safe and efficient operation of your inverter. Please read it thoroughly before installation and use, and keep it for future reference.
This power inverter is designed to convert 12V DC power from your battery to 110V AC power, suitable for a wide range of household appliances, electronics, and tools. Its pure sine wave output ensures compatibility with sensitive electronics, providing clean and stable power.
2. Package Contents
Upon opening the package, please verify that all items listed below are present and undamaged:
- 1 × EDECOA 2000W Pure Sine Wave Inverter
- 1 × Pair of Battery Cables (2AWG/2.3ft)
- 1 × EDRC Remote Controller Set
- 1 × Accessory Bag
- 1 × User Manual (this document)
Image: The EDECOA 2000W Pure Sine Wave Inverter, showing the main unit, battery cables (red and black), and the remote controller.
3. Product Features
- High Power Output: Provides 2000W continuous pure sine wave power and 4000W surge power, ideal for various applications including RVs, cars, boats, and home use.
- Efficient Conversion: Converts 12V DC to 110V AC with high efficiency (up to 92%).
- Multiple Outputs: Features 3 AC outlets, 1 USB-A Port (24W max), and 1 Type-C Port (27W max) for versatile charging and power needs. Fast-charging supported.
- Advanced Display & Control: LCD displays battery voltage, output voltage, and error codes. The EDRC remote controller allows convenient ON/OFF switching and battery capacity monitoring.
Image: Detailed view of the inverter's front panel, highlighting the 3 AC outlets, LED status lights, USB-A port (24W max), Type-C port (27W max), remote controller port, and the digital LCD display.
- Comprehensive Protection: Built-in protections against over voltage, low voltage, overload, output short circuit, BUS soft start failed, MOSFETs issues, and over-temperature. Includes an intelligent alarm system for easy problem identification.
Image: Visual representation of the inverter's multi-protection features, including AC low voltage, AC high voltage, overload, output short circuit, battery low voltage, battery over voltage, BUS voltage, and over-temperature protection.
- Wide Battery Compatibility: Compatible with 12V lead-acid batteries (AGM, GEL, FLD) and Lithium batteries.
Image: The inverter shown in front of a camper, with icons indicating compatibility with AGM, GEL, FLD, and Li-ion 12V batteries.
- Low THD: Features Three-Stage THD Reduction, ensuring a clean and stable waveform (THD < 3%).
Image: The inverter with a graphic overlay demonstrating "THREE-STAGE THD REDUCTION" and "Powers up loads with pure and clean waveform," showing a smooth sine wave.
- Soft-Start Function: Designed for heavy-duty loads, providing a soft start to protect appliances and the inverter.
Image: A close-up of the inverter's output side, illustrating "18W USB + 33W Type C," "Continuous 2000W output," and "Soft-start for heavy-duty loads" with icons of various home appliances.
4. Safety Information
WARNING: Failure to follow these safety instructions may result in serious injury or property damage.
- Read all instructions before operating the inverter.
- Do not open the inverter casing. There are no user-serviceable parts inside.
- Ensure proper ventilation around the inverter. Do not block ventilation openings.
- Keep the inverter away from water, moisture, and flammable materials.
- Connect the inverter only to a 12V DC power source. Do not connect to 24V or 48V systems.
- Always connect the inverter to the battery terminals with correct polarity (red to positive, black to negative). Reverse polarity will damage the inverter.
- Ensure all connections are tight to prevent overheating from loose connections.
- Do not exceed the inverter's rated continuous power output.
- Disconnect the inverter from the battery before performing any maintenance or cleaning.
- Keep out of reach of children.
5. Setup and Installation
5.1 Choosing a Location
Select a location for the inverter that is:
- Dry and well-ventilated.
- Away from direct sunlight and heat sources.
- Protected from dust and debris.
- Securely mounted to prevent movement.
5.2 Connecting the Inverter to the Battery
- Ensure the inverter is turned OFF.
- Connect the red battery cable to the positive (+) terminal of the inverter.
- Connect the black battery cable to the negative (-) terminal of the inverter.
- Connect the other end of the red battery cable to the positive (+) terminal of your 12V battery.
- Connect the other end of the black battery cable to the negative (-) terminal of your 12V battery.
- Ensure all connections are tight and secure to prevent voltage drop and overheating.
Image: The rear view of the inverter, clearly labeling the Positive Terminal (red) and Negative Terminal (black) for battery cable connection.
5.3 Connecting the Remote Controller
The EDRC remote controller connects to the "COMM" port on the inverter's front panel using the provided cable. This allows for convenient remote operation and monitoring of battery capacity.
6. Operating Instructions
6.1 Turning On/Off the Inverter
- After connecting the battery, press the power button on the inverter or the ON/OFF button on the EDRC remote controller to turn the inverter ON.
- The LCD display will illuminate, showing battery voltage and output voltage.
- To turn OFF, press the power button again.
6.2 Connecting AC Appliances
- Ensure the inverter is ON.
- Plug your AC appliances into the 110V AC outlets on the front of the inverter.
- Ensure the total wattage of all connected appliances does not exceed the inverter's continuous output rating (2000W).
- For inductive loads (e.g., motors, refrigerators), consider their surge wattage, which can be several times their continuous wattage. The inverter supports up to 4000W surge power.
Image: The inverter shown on a workbench surrounded by tools, with icons below indicating its ability to power various appliances like lights (2000W), refrigerators (200W), microwaves (1200W), coffee makers (1600W), CPAP machines (1000W), and general home appliances.
6.3 Using USB and Type-C Ports
The inverter features a USB-A port (24W max) and a Type-C port (27W max) for charging compatible devices such as smartphones, tablets, and other USB-powered electronics.
6.4 Understanding the LCD Display
The LCD display provides real-time information:
- Battery Voltage: Shows the current DC input voltage from your battery.
- Output Voltage: Displays the AC output voltage (e.g., 110V).
- Error Codes: In case of a fault, an error code will be displayed. Refer to the Troubleshooting section for details.
7. Maintenance
- Cleaning: Periodically clean the inverter's exterior with a dry, soft cloth. Do not use liquid cleaners or solvents.
- Ventilation: Ensure the ventilation openings are clear of dust and debris to maintain proper airflow and prevent overheating.
- Connections: Regularly check battery cable connections for tightness and corrosion. Clean terminals if necessary.
- Storage: If storing the inverter for an extended period, disconnect it from the battery and store it in a cool, dry place.
8. Troubleshooting
This section provides solutions to common issues you might encounter with your inverter. For problems not listed here, please contact EDECOA customer support.
| Problem | Possible Cause | Solution |
|---|---|---|
| Inverter does not turn on. | Loose battery connections, low battery voltage, faulty fuse, inverter switch off. | Check battery cable connections, charge battery, check fuses, ensure inverter switch is ON. |
| No AC output. | Overload, short circuit, low/high battery voltage, inverter fault. | Reduce load, check for short circuits, check battery voltage, restart inverter. Check LCD for error codes. |
| Inverter shuts down frequently. | Overload, overheating, low battery voltage. | Reduce load, ensure proper ventilation, charge battery. |
| Fan runs constantly or loudly. | High internal temperature, heavy load. | This is normal under heavy load or high ambient temperatures. Ensure ventilation is not blocked. |
| LCD displays an error code. | Specific fault detected (e.g., over voltage, low voltage, overload, short circuit). | Consult the inverter's specific error code list (if provided in a separate document) or contact support with the code. Generally, address the indicated protection issue. |
9. Specifications
| Feature | Detail |
|---|---|
| Model Name | 2000-12 PRO (Sincore 2-201D Pro) |
| Continuous Power | 2000 Watts |
| Surge Power | 4000 Watts |
| Input Voltage | 12V DC |
| Output Voltage | 110V AC |
| Output Waveform | Pure Sine Wave (THD < 3%) |
| Efficiency | Up to 92% |
| AC Outlets | 3 |
| USB-A Port | 1 (24 Watts max) |
| Type-C Port | 1 (27 Watts max) |
| Product Dimensions | 14.5 x 9 x 3.15 inches |
| Item Weight | 7.7 pounds |
| Manufacturer | Dong Guan Shi Chang Tian Electrical Technology Co., Ltd |
| Date First Available | April 25, 2023 |
10. Warranty and Support
EDECOA products are designed for reliability and performance. For warranty information, please refer to the warranty card included with your product or visit the official EDECOA website. If you encounter any issues or have questions regarding your inverter, please contact EDECOA customer support for assistance.
Contact Information: Please refer to the EDECOA official website or your purchase documentation for the most current customer support contact details.
