Checkme TMB-2285-BK Bluetooth Wrist Blood Pressure Monitor Instruction Manual

1. Product Overview

The Checkme TMB-2285-BK is a Bluetooth-enabled wrist blood pressure monitor designed for accurate and convenient blood pressure and pulse rate measurements. It features a large LCD display, voice broadcast functionality, and the ability to store multiple user profiles with extensive reading history. The device is compact and portable, making it suitable for on-the-go health monitoring.

2. What's in the Box

• 1x Checkme TMB-2285-BK Wrist Blood Pressure Monitor
• 2x AAA Batteries
• 1x User Manual
• 1x Quick Guide
• 1x Warranty Card

Image: Contents of the Checkme TMB-2285-BK Blood Pressure Monitor package, including the monitor, batteries, and documentation.

3. Setup

3.1 Battery Installation

1. Open the battery compartment cover located on the side of the monitor.
2. Insert the two AAA batteries, ensuring correct polarity (+/-).
3. Close the battery compartment cover securely.

3.2 Initial Device Settings

1. Upon first power-on, the monitor will prompt you to select your preferred language. Use the MEM/USER button to cycle through options and the START/STOP button to confirm.
2. Set the date format (Month/Day or Day/Month) and time format (12-hour or 24-hour) using the MEM/USER button to adjust and START/STOP to confirm.
3. Adjust the voice broadcast volume or turn it off if desired.

3.3 Cuff Placement

1. Roll up your sleeve to expose the skin on your wrist. Ensure your sleeve is not too tight.
2. Position the cuff on your left wrist with your palm facing upwards. The monitor should be placed approximately 1-2 cm (0.4-0.8 inches) from your wrist joint.
3. Ensure the cuff is snug but not overly tight. The wrist circumference range for this cuff is 5.3-8.5 inches (13.5-21.5 cm).

Image: Illustration showing correct wrist cuff placement, 1-2 cm from the wrist joint with the palm facing up.

3.4 App Download and Bluetooth Pairing

1. Download and install the 'ViHealth' app from the App Store (iOS) or Google Play Store (Android).
2. Ensure Bluetooth is enabled on your smartphone.
3. Turn on the blood pressure monitor. A blinking Bluetooth icon will appear on the display.
4. Open the ViHealth app and follow the on-screen instructions to add your device. Select 'BP4 Flex' from the device list and confirm pairing.

4. Operating Instructions

4.1 Taking a Measurement

1. Sit comfortably with your tested arm resting on a flat surface. Place your elbow on a table so that the cuff is at the same level as your heart.
2. Turn your palm upwards, sit upright in a chair, and take 5-6 deep breaths before starting.
3. Press the START/STOP button to turn on the monitor. It will display the latest record of the current user and automatically begin a measurement.
4. Remain still and quiet during the measurement. The monitor will inflate and then slowly deflate to take the reading.
5. Your systolic, diastolic, and pulse readings will be displayed on the LCD screen and announced via voice broadcast (if enabled).

4.2 Understanding Readings

• SYS (Systolic Pressure): The top number, indicating the pressure in your arteries when your heart beats.
• DIA (Diastolic Pressure): The bottom number, indicating the pressure in your arteries between beats.
• PULSE: Your heart rate, measured in beats per minute.
• An irregular heartbeat icon may appear if an irregular pulse is detected. If this occurs, retest after a few minutes of rest.

4.3 User Profiles and History

• The monitor supports two user profiles (User 1 and User 2), each storing up to 199 readings, and a Guest mode (no storage).
• To switch users when the monitor is off, press and hold the MEM/USER button to display the current user ID. Press MEM/USER again to switch to another user, then press START/STOP to confirm.
• To check history records when the monitor is off, press the MEM/USER button to enter the history function. Use the MEM/USER button to scroll through previous readings.
• All readings are automatically synced to the ViHealth app when connected via Bluetooth, providing unlimited data storage and trend analysis.

5. Maintenance

5.1 Cleaning and Storage

• Clean the monitor and cuff with a soft, dry cloth. Do not use abrasive cleaners or immerse the device in water.
• Store the monitor in its protective case in a cool, dry place away from direct sunlight and extreme temperatures.
• Remove batteries if the device will not be used for an extended period to prevent leakage.

6. Troubleshooting

• Inaccurate Readings: Ensure correct cuff placement, proper sitting posture, and that you remain still and quiet during measurement. Avoid caffeine, alcohol, and exercise for 30 minutes prior to measurement.
• Irregular Heartbeat Icon: If this icon appears, retest after a few minutes of rest. If it persists, consult a healthcare professional.
• Bluetooth Connection Issues: Ensure Bluetooth is enabled on your smartphone and the monitor. Try restarting both devices and re-pairing through the ViHealth app.
• No Display: Check battery installation and ensure batteries are not depleted. Replace if necessary.

7. Specifications

8. Warranty and Support

8.1 Legal Disclaimer

Actual product packaging and materials may contain more and different information than what is shown on our website. We recommend that you do not rely solely on the information presented and that you always read labels, warnings, and directions before using or consuming a product.

8.2 Customer Support

For any issues, questions, or support needs, please contact Checkme-CA customer service. Our support experts are trained to assist you and would love to hear from you. Refer to the warranty card included in your package for specific contact details or visit www.checkmecare.com.