1. Introduction
This manual provides essential information for the safe and efficient operation, installation, and maintenance of your V-Guard Luxecube Avo 10 Litre Analog Water Heater. Please read these instructions carefully before using the appliance and retain them for future reference.
The V-Guard Luxecube Avo water heater is designed to provide hot water efficiently, featuring Advanced Thermocline Technology (ATT) for enhanced performance and energy savings. Its robust construction ensures durability and reliability.
2. Important Safety Information
Always adhere to the following safety guidelines to prevent injury or damage to the appliance:
- Electrical Safety: Ensure the water heater is connected to a properly grounded electrical outlet. Do not use extension cords.
- Water Pressure: This water heater is suitable for high-rise buildings and can handle water pressure up to 0.8 MPa (8 bar).
- Overheat Protection: The unit is equipped with a dual overheat protection system, including an advanced thermostat and a thermal cut-out mechanism.
- Pressure Relief: A 5-in-1 multi-function safety valve is integrated to prevent excessive pressure build-up, vacuum formation, and reverse water flow.
- Wiring: Internal wiring uses silicone-grade material for enhanced safety and longevity.
- Installation: Installation should only be performed by qualified personnel. Refer to the installation section for details.
- Children and Vulnerable Persons: This appliance is not intended for use by persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
3. Product Overview
The V-Guard Luxecube Avo water heater combines advanced technology with a sleek design to provide efficient hot water.
Key Features:
- Advanced Thermocline Technology (ATT): Delivers up to 38% more hot water by minimizing mixing of hot and cold water within the tank.
- Energy Efficiency: Features high-density, extra-thick PUF insulation for maximum heat retention and energy savings. It is also environmentally friendly with CFC-free material.
- Durable Tank: The inner tank is fortified with titanium-infused vitreous enamel coating, protecting against hard water and corrosion.
- Efficient Heating Element: Equipped with a nickel-enriched Incoloy 800 heating element, designed to withstand tough water conditions and ensure fast, efficient heating.
- Luxe Glow Illumination: A unique dual-color indicator that glows green during heating and red on standby.
Image: Front view of the V-Guard Luxecube Avo 10 Litre Analog Water Heater.
Components Included:
- 1 Number Electric Water Heater
- 1 Number Wall Mounting Kit
- 1 Number Multi Function Valve
4. Setup and Installation
For optimal performance and safety, professional installation is highly recommended. V-Guard offers free PAN India installation at all serviceable PIN codes.
Installation Steps (General Guidance):
- Site Selection: Choose a suitable wall location for mounting, ensuring it is sturdy enough to support the weight of the water heater when full. Ensure adequate clearance for maintenance.
- Mounting: Use the provided wall mounting kit to securely attach the water heater to the wall.
- Water Connections: Connect the inlet and outlet pipes. The Luxecube Avo comes with free durable stainless-steel inlet and outlet pipes (1.5 ft × 2) provided during installation. Ensure all connections are watertight.
- Safety Valve Installation: Install the multi-function safety valve on the inlet pipe as per the instructions provided by the technician.
- Filling the Tank: Before connecting to power, open a hot water tap in your home and allow the water heater tank to fill completely until water flows steadily from the tap. Close the hot water tap.
- Electrical Connection: Connect the water heater to a dedicated, grounded electrical outlet.
Note: Angle cock/control valve and nipple connectors are not included in the product package and will be provided by the service technician during installation.
Image: Map illustrating nationwide service coverage for installation.
5. Operating Instructions
Initial Start-up:
- Ensure the tank is completely filled with water (refer to Setup section).
- Plug the power cord into the electrical outlet or switch on the dedicated power supply.
- The Luxe Glow indicator will illuminate, showing the current status.
Temperature Control:
The Luxecube Avo 10 Litre Analog model features a manual temperature control knob located on the front panel. Rotate the knob to set your desired water temperature. The adjustable thermostat range is typically between 35°C and 75°C.
Luxe Glow Indicator:
- Green Light: Indicates that the water heater is actively heating the water.
- Red Light: Indicates that the water heater is on standby, meaning the water has reached the set temperature and the heating element is off.
Image: Close-up of the Luxe Glow indicator on the water heater, showing its dual-color functionality.
6. Maintenance
Regular maintenance ensures the longevity and efficient operation of your water heater.
- Cleaning: Periodically wipe the exterior of the water heater with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Drainage: If the water heater is not going to be used for an extended period, or if there is a risk of freezing, it is advisable to drain the tank. Consult a qualified technician for this procedure.
- Anode Rod Inspection: The magnesium anode rod helps protect the tank from corrosion. It should be inspected and replaced periodically by a service technician, especially in areas with hard water.
- Safety Valve Check: The pressure relief valve should be checked annually by a qualified technician to ensure it is functioning correctly.
For any complex maintenance or repairs, always contact authorized V-Guard service personnel.
7. Troubleshooting
Before contacting customer service, review the following common issues and their potential solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No hot water | No power supply; Thermostat set too low; Thermal cut-out activated; Heating element failure. | Check power connection/circuit breaker; Adjust thermostat; Reset thermal cut-out (if accessible and safe); Contact service. |
| Water not hot enough | Thermostat set too low; High hot water demand; Sediment build-up. | Increase thermostat setting; Allow more time for heating; Contact service for descaling. |
| Water is too hot | Thermostat set too high. | Decrease thermostat setting. |
| Luxe Glow indicator not working | Electrical fault; Indicator light failure. | Contact service. |
| Water leakage | Loose connections; Faulty safety valve; Tank damage. | Tighten connections; Contact service for inspection. |
If the problem persists after attempting these solutions, please contact V-Guard customer support.
8. Specifications
| Feature | Detail |
|---|---|
| Brand | V-Guard |
| Model Number | Luxecube Avo 10 |
| Capacity | 10 Liters |
| Power Source | Corded Electric |
| Wattage | 2000 Watts |
| Product Dimensions (W x H) | 35.6W x 32.5H Centimeters |
| Item Weight | 13.21 Kilograms |
| Mount Type | Wall |
| Colour | White |
| Special Features | Advanced Thermocline Technology, Luxe Glow Illumination |
| Max Water Pressure | 0.8 MPa (8 Bar) |
| Inner Tank Material | Titanium-Infused Vitreous Enamel Coated Steel |
| Heating Element Material | Nickel-enriched Incoloy 800 |
| BEE Star Rating | 5 Star (BEE Label period: 1st January 2023 - 31st December 2025) |
Image: Diagram showing the dimensions (356mm x 357mm x 325mm) and coverage details of the V-Guard Luxecube Avo water heater.
9. Warranty and Support
Warranty Coverage:
- 7 Years: On the Inner Tank
- 4 Years: On the Heating Element
- 2 Years: On the Product
Please retain your purchase receipt for warranty claims.
Customer Support:
For installation, service, or any queries regarding your V-Guard Luxecube Avo water heater, please contact V-Guard customer service.
Manufacturer: V-Guard Industries Ltd. 42/962, Vennala High School Road, Vennala, Kochi- 682028, Kerala, India
Packer Contact Information: V-Guard Industries Ltd. 42/962, Vennala High School Road, Vennala, Kochi- 682028, Kerala, India
V-Guard offers free PAN India installation at all serviceable PIN codes.