Attoe X3 Wireless Gaming Mouse Instruction Manual

Introduction

The Attoe X3 Wireless Gaming Mouse is designed for gamers seeking precision, versatility, and comfort. Featuring a lightweight, hollowed-out design, it incorporates a high-precision PAW3311 sensor, offering up to 12,000 DPI. This mouse supports tri-mode connectivity (wired, 2.4GHz wireless, and Bluetooth 5.1) and includes 6 programmable buttons for a customized gaming experience. Its ergonomic design aims to reduce hand fatigue during extended use.

Image: Attoe X3 Wireless Gaming Mouse showcasing its RGB lighting, PAW3311 sensor, tri-mode connectivity, adjustable DPI, and ergonomic design.

Setup

The Attoe X3 Wireless Gaming Mouse offers three connection modes: wired, 2.4GHz wireless, and Bluetooth 5.1. Choose the mode that best suits your needs.

Wired Connection

1. Locate the included USB-C to USB-A cable.
2. Connect the USB-C end to the port on the front of the X3 mouse.
3. Plug the USB-A end into an available USB port on your computer.
4. The mouse will automatically be detected and ready for use. This mode also charges the mouse battery.

2.4GHz Wireless Connection

1. Locate the 2.4GHz USB receiver (dongle), typically stored in a compartment on the underside of the mouse.
2. Plug the USB receiver into an available USB port on your computer.
3. Turn on the mouse using the power switch located on the underside.
4. The mouse should automatically connect. If not, press the mode switch button on the bottom of the mouse until the indicator light shows 2.4GHz mode (refer to the operating section for indicator details).

Bluetooth 5.1 Connection

1. Turn on the mouse using the power switch on the underside.
2. Press the mode switch button on the bottom of the mouse until the indicator light shows Bluetooth mode.
3. On your computer or device, go to Bluetooth settings and search for new devices.
4. Select "Attoe X3" or a similar name from the list of available devices to pair.
5. The mouse can be connected to two devices separately in wireless mode (2.4G and Bluetooth).

Image: The Attoe X3 mouse illustrating its three connection modes: Bluetooth, 2.4GHz, and Type-C wired, along with battery indicator.

Operating Instructions

DPI Adjustment

The X3 mouse features a PAW3311 sensor with adjustable DPI settings, allowing you to customize sensitivity for different tasks or games. There are five levels of DPI adjustment: 800, 1600, 3200, 6400, and 12000 DPI.

• To adjust DPI, use the dedicated DPI adjustment button, typically located on the underside or top of the mouse. Each press cycles through the available DPI levels.
• The current DPI level may be indicated by a change in the mouse's RGB lighting color or a visual indicator in the software.

Image: Diagram showing the five adjustable DPI levels (800, 1600, 3200, 6400, 12000) for the Attoe X3 mouse.

Programmable Buttons

The X3 mouse is equipped with 6 programmable buttons. These buttons can be customized using the intuitive software provided by Attoe. The software allows you to:

• Assign macros to buttons.
• Reconfigure button layouts.
• Adjust other mouse settings to match your gaming style.

Refer to the software's user interface for detailed instructions on button programming.

Image: Screenshot of the Attoe X3 mouse software interface, demonstrating options for customizing light and key settings.

RGB Dynamic Lighting

The mouse features RGB dynamic lighting. There is an On/Off button for the RGB lighting, allowing you to control its activation. Further customization of lighting modes may be available through the dedicated software.

Battery and Charging

The X3 mouse is powered by a 500mAh battery, providing approximately 40 hours of Bluetooth runtime. When the battery is low, connect the mouse using the included USB-C cable to charge it. The mouse can be used while charging in wired mode.

Maintenance

Proper maintenance ensures the longevity and optimal performance of your Attoe X3 Wireless Gaming Mouse.

• Cleaning: Use a soft, dry cloth to wipe the surface of the mouse. For the hollowed-out areas, a can of compressed air can help remove dust and debris. Avoid using liquid cleaners directly on the mouse.
• Storage: When not in use for extended periods, store the mouse in a dry, cool place.
• Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Charge the mouse when the low battery indicator appears.
• Cable Care: Handle the USB-C cable gently to prevent damage to the connectors.

Troubleshooting

If you encounter issues with your Attoe X3 Wireless Gaming Mouse, refer to the following common solutions:

Mouse Not Responding

• Check Power: Ensure the mouse is turned on.
• Check Connection:
  • Wired: Verify the USB-C cable is securely connected to both the mouse and the computer. Try a different USB port.
  • 2.4GHz Wireless: Ensure the USB receiver is plugged in and the mouse is in 2.4GHz mode. Try re-pairing by turning the mouse off and on, then re-inserting the receiver.
  • Bluetooth: Confirm Bluetooth is enabled on your device and the mouse is in Bluetooth pairing mode. Re-pair the device if necessary.
• Battery Level: Charge the mouse if the battery is low.

Lag or Intermittent Connection

• Interference: Move the mouse closer to the USB receiver (for 2.4GHz) or your Bluetooth device. Avoid using the mouse near other wireless devices that might cause interference.
• Surface: Ensure you are using the mouse on a suitable surface. A mouse pad is recommended for optimal tracking.
• Drivers: Ensure your computer's USB or Bluetooth drivers are up to date.

Scroll Wheel Issues

• Obstruction: Check for any debris or dust around the scroll wheel. Use compressed air to clean the area.
• Software: Ensure the mouse software is installed and updated, as some scroll wheel behaviors can be configured there.

Buttons Not Responding

• Software Configuration: Check the mouse's software to ensure buttons are correctly mapped and not disabled.
• Physical Obstruction: Ensure no physical debris is preventing button presses.

Specifications

Image: Visual representation of the Attoe X3 mouse dimensions (110mm length, 55mm width, 35mm height).

Warranty and Support

The Attoe X3 Wireless Gaming Mouse comes with a standard return policy, typically allowing for returns or replacements within 30 days of purchase. For specific warranty details, return procedures, or technical support, please refer to the official Attoe website or contact their customer service directly.

• Manufacturer: Attoe
• Return Policy: 30-day refund/replacement (as per Amazon's buybox winner information)
• Online Support: Visit the official Attoe website for FAQs, driver downloads, and contact information.