Important Safety Information
Please read all safety and operating instructions carefully before using this product to prevent injury to your dog or damage to the device.
- This replacement receiver collar is intended for use with the PUPKIDS T223 Innovative Training Collar system.
- Suitable for dogs over 6 months old.
- Designed for dogs weighing between 20 lbs (9 kg) and 140 lbs (63 kg). It is not suitable for small dogs under 20 lbs.
- The receiver collar is IPX7 waterproof, allowing for submersion in water up to 1 meter for 30 minutes. Ensure the charging port cover is securely closed before exposing to water.
- The remote control (sold separately with the full training system) is NOT waterproof. Keep the remote dry.
- Avoid leaving the collar on the dog for more than 12 consecutive hours to prevent skin irritation.
- Regularly check your dog's neck for any signs of irritation or sores. If irritation occurs, discontinue use and consult a veterinarian.
Product Overview
The PUPKIDS T223 Replacement Receiver Collar is designed to seamlessly integrate with your existing PUPKIDS T223 Innovative Training Collar system. This receiver provides reliable performance and features to assist in dog training.
- Model: T223
- Compatibility: Works with PUPKIDS T223 Training Collar Remote.
- Waterproof Rating: IPX7 (Receiver Collar).
- Night Light: Features 3 colorful night-light types for visibility in low light conditions.
- Battery: Rechargeable, offering long battery life with approximately 2 hours for a full charge.
- Collar Size: Adjustable strap fits neck sizes 12-25 inches.
- Included Components: 1 x PUPKIDS T223 Replacement Receiver Collar. (Note: Remote control is not included with this replacement receiver.)

Image: The PUPKIDS T223 Replacement Receiver Collar in blue, featuring the main receiver unit and adjustable strap.
Setup
1. Charging the Receiver Collar
- Locate the charging port on the receiver unit.
- Open the rubber cover of the charging port.
- Connect the charging cable (typically USB) to the receiver and a suitable power source (e.g., USB adapter, computer USB port).
- The indicator light on the receiver will show charging status (refer to your original manual for specific light indications).
- A full charge typically takes approximately 2 hours.
- Once fully charged, disconnect the cable and securely close the rubber cover to maintain waterproofing.
2. Fitting the Collar
- Place the receiver collar around your dog's neck.
- Adjust the strap to ensure a snug but comfortable fit. You should be able to fit one or two fingers between the collar and your dog's neck.
- The contact points on the receiver should make direct contact with your dog's skin.
- The collar is adjustable from 12 to 25 inches. If the strap is too long, the excess part can be cut off after ensuring the correct fit.

Image: An illustration showing the adjustable nature of the collar, suitable for dogs weighing 20-140 lbs, with a length of 12-25 inches. It also indicates that excess strap can be trimmed.
3. Pairing with Remote Control
As this is a replacement receiver collar, it needs to be paired with your existing PUPKIDS T223 Training Collar remote control. Refer to the instruction manual that came with your original PUPKIDS T223 Training Collar system for detailed pairing procedures. Typically, pairing involves a specific sequence of button presses on the remote and activating the receiver.
Operating Instructions
1. Powering On/Off the Receiver Collar
The PUPKIDS T223 receiver collar features an innovative magnetic switch for power control.
- To turn the collar ON, touch the magnetic dot on the receiver unit with the corresponding magnetic area on your PUPKIDS T223 remote control (or a dedicated magnetic tool if provided with your original system). The indicator light will illuminate.
- To turn the collar OFF, repeat the same magnetic touch procedure. The indicator light will turn off.

Image: An illustration demonstrating the innovative magnetic switch for turning the collar on and off, showing the magnetic dot on the receiver and its interaction with the remote.
2. Using the Night Light Feature
The receiver collar is equipped with 3 colorful night-light types to help you quickly locate your dog in low-light conditions.
- Activation and changing of night light modes are controlled via your PUPKIDS T223 remote control.
- Refer to your original PUPKIDS T223 Training Collar manual for specific instructions on how to activate and cycle through the night light colors.
3. Training Modes (Stimulation, Vibration, Tone)
This replacement receiver collar is designed to respond to the various training modes (static stimulation, vibration, and tone) initiated by your PUPKIDS T223 remote control. The collar utilizes Humanized Micro Pulse Technology with four contact points to ensure gentle and effective training.
- All training functions, including intensity levels and mode selection, are controlled exclusively by the remote control.
- For detailed guidance on how to use each training mode effectively and safely, please consult the comprehensive instruction manual provided with your original PUPKIDS T223 Training Collar system.

Image: An illustration depicting the Humanized Micro Pulse Technology, showing how the same energy is distributed to four contact points for gentle and effective dog training.
Maintenance
- Cleaning: Regularly clean the receiver collar and contact points with a damp cloth. Ensure no dirt or debris accumulates around the contact points, as this can affect performance and cause skin irritation.
- Water Exposure: The receiver collar is IPX7 waterproof. It can be used in rain, during swimming, or bathing. Always ensure the charging port's rubber cover is tightly sealed before exposing the collar to water. After water exposure, dry the collar thoroughly.
- Charging: Charge the collar when the battery indicator suggests low power. Avoid leaving the collar on charge for excessively long periods after it is fully charged.
- Storage: When not in use for an extended period, store the collar in a cool, dry place. Ensure it is fully charged before storing and periodically recharge it to maintain battery health.
- Strap Inspection: Periodically inspect the collar strap for wear and tear. Replace if damaged to ensure secure fit and proper function.

Image: An illustration highlighting the IPX7 waterproof capability of the receiver collar, showing its suitability for swimming, rainy days, and bathing. It also explicitly states that the remote is not waterproof.
Troubleshooting
If you encounter issues with your PUPKIDS T223 Replacement Receiver Collar, try the following steps:
- Collar Not Turning On:
- Ensure the collar is fully charged.
- Confirm you are using the magnetic switch correctly to power on the device.
- Collar Not Responding to Remote:
- Verify the receiver collar is turned on.
- Check if the remote control is powered on and has sufficient battery.
- Re-pair the receiver collar with the remote control. Refer to your original PUPKIDS T223 Training Collar manual for pairing instructions.
- Ensure you are within the effective range of the remote control.
- No Stimulation/Vibration/Tone:
- Ensure the collar is properly fitted and the contact points are touching your dog's skin.
- Check the intensity level on your remote control.
- Confirm the collar is charged and paired.
- Skin Irritation:
- Remove the collar immediately.
- Clean your dog's neck and the collar.
- Consult a veterinarian if irritation persists.
- Ensure the collar is not worn for more than 12 hours a day.
If these steps do not resolve the issue, please contact PUPKIDS customer support for further assistance.
Specifications
| Brand | PUPKIDS |
| Model Number | T223 (Replacement Receiver Collar) |
| ASIN | B0F9T6VHWC |
| Waterproof Rating | IPX7 (Receiver Collar) |
| Recommended Dog Weight | 20-140 lbs (9-63 kg) |
| Collar Length | Adjustable, 12-25 inches |
| Battery Type | Rechargeable |
| Charging Time | Approx. 2 hours |
| Color | Blue |
| Closure Type | Buckle |
| Item Dimensions (Parcel) | 10 x 8 x 4 cm |
| Item Weight (Parcel) | 95 g |
| Date First Available | June 14, 2025 |
Warranty and Support
For warranty information and customer support regarding your PUPKIDS T223 Replacement Receiver Collar, please refer to the documentation included with your original purchase or visit the official PUPKIDS website. You may also contact PUPKIDS customer service directly for assistance with product inquiries, troubleshooting, or warranty claims.
Please have your product model number (T223) and ASIN (B0F9T6VHWC) available when contacting support.