Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your HANSSHOW Electric Sunshade Roof for Model Y Juniper. Designed for the New Model Y 2025 Upgrade 2.0, this retractable sunroof shade offers enhanced UV protection and heat insulation, improving your vehicle's interior comfort.
Image: The HANSSHOW Electric Sunshade Roof, shown with a Tesla Model Y, highlighting its integration and design.
Safety Information
Please read all safety warnings and instructions carefully before installation and operation to prevent injury or damage to the product and vehicle.
- Ensure the vehicle is turned off and the power supply is disconnected before beginning installation.
- Installation should be performed by a qualified professional if you are not confident in your ability to follow the instructions precisely.
- Keep hands and objects clear of the sunshade's path during operation to avoid pinching. The product features an anti-pinch design, but caution is always advised.
- Do not attempt to force the sunshade open or closed manually if it encounters an obstruction.
- Operating voltage: 9V~16V. Standard voltage: 12V. Ensure your vehicle's electrical system is compatible.
Image: Illustration of the anti-pinch design, demonstrating how the sunshade automatically stops when an obstacle is detected.
Package Contents
Verify that all components are present and undamaged before proceeding with installation.
- Electric sunshade x 1
- Rocker x 1
- Screw x 3
- Cross screwdriver x 1
- Glove x 1
- Power cord x 1
- Rear plug x 2
Setup and Installation
The installation process is designed to integrate seamlessly with your vehicle's existing structure. The power supply is wired discreetly to maintain vehicle integrity and warranty.
- Preparation: Ensure the vehicle is parked on a level surface and the ignition is off. Gather all tools and components listed in the package contents. It is recommended to wear the provided gloves during installation.
- Accessing the Roof Area: Carefully remove any existing trim or covers in the roof area as per your vehicle's specific instructions to expose the installation points for the sunshade.
- Positioning the Sunshade: Gently place the electric sunshade into the designated area of the glass roof. Ensure it aligns precisely with the contours of the original car glass roof to prevent gaps or sagging.
- Securing the Sunshade: Use the provided screws and cross screwdriver to securely fasten the sunshade in place. Refer to the specific mounting points on the sunshade unit.
- Wiring the Power Supply: Connect the power cord to the sunshade unit and route it discreetly to the vehicle's power source. The wiring is designed to be concealed and should not interfere with the vehicle's original wiring or warranty. Connect the rear plugs as instructed.
- Testing Functionality: Once secured and wired, carefully test the sunshade's operation using the smart switch and voice control before reassembling any removed trim.
- Final Assembly: Reinstall any removed trim or covers, ensuring all components are properly seated and secured.
Note: The sunshade is custom-made for Model Y Juniper 2025.03+ models, ensuring a perfect fit.
Operating Instructions
Your HANSSHOW Electric Sunshade Roof offers convenient control options for ease of use.
Voice Control
The sunshade can be operated hands-free using voice commands.
- To activate voice control, say "Hello Tesla".
- To open the sunshade, say "open".
- To close the sunshade, say "close".
- To stop the sunshade at any point during its movement, say "Pause".
Image: Visual representation of the voice control feature, illustrating the commands "Open", "Close", and "Pause".
Smart Switch (Button Control)
For manual control, use the integrated smart switch.
- Press one button to initiate opening of the sunshade. Press again to stop it at your desired position.
- Press the other button to initiate closing of the sunshade. Press again to stop it at your desired position.
Image: A hand operating the one-touch smart switch for effortless electric control of the sunshade.
Image: Depiction of the sunshade's smooth and silent motion, indicating no creaks, squeaks, or friction sounds during operation.
Maintenance
Regular maintenance ensures the longevity and optimal performance of your electric sunshade.
- Cleaning: Use a soft, damp cloth to wipe down the sunshade fabric and frame. Avoid abrasive cleaners or solvents that could damage the material or finish.
- Inspection: Periodically inspect the sunshade for any signs of wear, loose connections, or obstructions in its track.
- Operation Check: Regularly test both voice and button controls to ensure smooth operation and responsiveness.
- Material Care: The sunshade is constructed from ABS engineering plastics, which are resistant to aging and cracking. No special treatments are typically required for the material itself.
Troubleshooting
If you encounter any issues with your HANSSHOW Electric Sunshade Roof, refer to the following common solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Sunshade does not move. | No power, loose connection, or motor issue. | Check power connections. Ensure vehicle ignition is on. If problem persists, contact support. |
| Sunshade stops midway or reverses. | Obstruction in the track, or anti-pinch sensor activated. | Inspect the track for any debris or objects. Clear any obstructions. |
| Voice control not responding. | Incorrect command, background noise, or microphone issue. | Ensure clear pronunciation of commands ("Hello Tesla", "open", "close", "Pause"). Reduce cabin noise. Try button control. |
| Unusual noises during operation. | Debris in track or motor issue. | Inspect track for debris. If noises persist, contact support. |
Specifications
- Model: HSTAB1078 (Model Y Juniper Sunshade)
- Compatibility: Custom-made for Model Y Juniper 2025.03+
- Material: ABS Engineering Plastics
- Control: Voice Control, Smart Button Control
- Standard Voltage: 12V
- Working Voltage: 9V~16V
- Anti-Pinch Strength: <100N
- UV Protection: Blocks harmful UV rays, Reflectivity up to 90%
- Heat Insulation: Reduces heat and light entering the vehicle.
Image: Comparison chart illustrating the temperature difference inside the vehicle before and after using the sunshade, demonstrating improved heat insulation.
Image: Visual representation of the sunshade's ability to block harmful UV rays, with a stated reflectivity of up to 90%.
Warranty and Support
HANSSHOW provides a 1-Year Warranty for this Electric Sunshade Roof.
This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from improper installation, accident, misuse, abuse, or unauthorized modification.
For technical support, warranty claims, or any other inquiries, please contact HANSSHOW customer service. Refer to the contact information provided with your purchase or visit the official HANSSHOW website.
Note: The concealed wiring ensures the integrity of the vehicle and its original factory warranty is not affected by the installation of this product.
