Introduction
Thank you for choosing the PINDOWS Ladies Sports Watch PDS-636-N3. This watch combines analog and digital displays with a luminous LED backlight, offering both sporty aesthetics and clear readability in various conditions. Designed for an active lifestyle, it features 50m water resistance and multiple functions suitable for running, hiking, and other outdoor adventures. This manual provides detailed instructions on how to set up, operate, and maintain your watch.
The PDS-636-N3 is available in a variety of attractive colors, including sophisticated white, soft pink, and vibrant lime green, allowing you to choose a style that matches your preference.
Watch Components
Familiarize yourself with the main components and buttons of your PINDOWS sports watch:
- LIGHT Button: Activates the LED backlight.
- MODE Button: Cycles through different modes (Time, Alarm, Stopwatch).
- START Button: Used to start/stop functions in Stopwatch mode, and adjust settings.
- RESET Button: Used to reset functions in Stopwatch mode, and adjust settings.
Image: Watch diagram illustrating button functions and key dimensions.
Setup Instructions
1. Setting Time and Date
- In normal time display mode, press the MODE button three times to enter the time setting mode. The seconds will flash.
- Press the RESET button to select the item you wish to set (seconds, hour, minute, month, date, day of the week).
- Use the START button to adjust the selected value.
- Once all settings are correct, press the MODE button to exit the setting mode.
2. Setting the Alarm
- From normal time display, press the MODE button twice to enter the alarm setting mode. The hour digits will flash.
- Press the START button to adjust the hour.
- Press the RESET button to switch to minute setting.
- Press the START button to adjust the minute.
- Press the MODE button to exit the alarm setting mode.
- To turn the alarm ON/OFF, in alarm display mode, press the START button. The alarm icon will appear/disappear.
3. Hourly Chime
To activate or deactivate the hourly chime, in alarm display mode, press the RESET button. The hourly chime icon will appear/disappear.
Operating Instructions
1. Using the Stopwatch
- From normal time display, press the MODE button once to enter stopwatch mode.
- Press the START button to begin timing.
- Press the START button again to pause timing.
- Press the RESET button to reset the stopwatch to zero.
- Press the MODE button to return to normal time display.
2. Activating the LED Backlight
Press the LIGHT button to illuminate the digital display. The backlight will remain on for a few seconds, providing clear visibility in low-light conditions.
Image: The watch display with its LED backlight activated for night visibility.
Maintenance
1. Water Resistance (50M)
Your PINDOWS watch is rated for 50 meters (5 ATM) water resistance. This means it is suitable for daily use, such as washing hands, getting caught in the rain, and swimming in shallow water. It is not recommended for diving, snorkeling, or prolonged exposure to very cold water or hot water/steam (e.g., showers, saunas) as this can compromise the seals.
Image: The watch demonstrating its 50M water resistance, suitable for swimming and daily water exposure.
2. Cleaning
Wipe the watch case and strap regularly with a soft, dry cloth. For stubborn dirt, a slightly damp cloth can be used, followed by drying. Avoid using chemical cleaners or abrasive materials.
3. Battery Replacement
The watch uses one CR2032 battery. When the display becomes dim or the watch stops functioning, it may be time to replace the battery. Battery replacement should ideally be performed by a qualified watch technician to ensure proper sealing and maintain water resistance.
Troubleshooting
- Watch not displaying time/blank screen: Check if the battery needs replacement. If recently replaced, ensure it is inserted correctly.
- Incorrect time/date: Follow the "Setting Time and Date" instructions in the Setup section to re-adjust.
- Buttons not responding: Ensure the watch is not in a locked mode (if applicable, though this model does not have a specific lock). Try pressing buttons firmly. If unresponsive, a battery issue might be present.
- Water inside the watch: If you notice condensation or water droplets inside the watch, stop using it immediately and take it to a professional for inspection and repair. Water resistance can be compromised by impacts or aging seals.
Specifications
| Feature | Detail |
|---|---|
| Model Number | PDS-636-N3 |
| Display Type | Analog-Digital |
| Movement | Japanese Quartz |
| Water Resistance | 50 Meters (5 ATM) |
| Special Features | LED Backlight, Alarm, Stopwatch, Hourly Chime |
| Case Material | Plastic |
| Band Material | Thermoplastic Polyurethane (TPU) |
| Windshield Material | Mineral Glass |
| Case Diameter | 42 mm |
| Case Thickness | 16 mm |
| Band Width | 18 mm |
| Band Length | 220 mm (Adjustable for wrist sizes 5.6 to 7.8 inches) |
| Clasp Type | Buckle |
| Battery | 1 CR2032 battery (included) |
| Product Weight | 110 g |
| Country of Origin | China |
Warranty Information
This PINDOWS watch comes with a manufacturer's warranty. Please refer to the warranty card included in your product packaging for specific terms, conditions, and duration. Keep your proof of purchase for any warranty claims.
Customer Support
For any questions, concerns, or technical assistance regarding your PINDOWS Ladies Sports Watch PDS-636-N3, please contact PINDOWS customer support through the retailer where you purchased the product or visit the official PINDOWS website for contact information.