1. Important Safety Information
Please read all instructions carefully before installing or using this heater. Failure to follow these instructions may result in electric shock, fire, property damage, or personal injury. Retain this manual for future reference.
- Electrical Connection: All wiring must be performed by a qualified electrician in accordance with national and local electrical codes. Ensure the power supply matches the heater's voltage requirements.
- Overheating Protection: This heater is equipped with dual-protection safety features, including a visual high-temperature alarm and automatic power-off protection via safety limit switches. If the heater overheats, it will automatically shut off. Identify and resolve the cause of overheating before resuming operation.
- Placement: Do not install the heater directly below a permanent electrical outlet. Maintain adequate clearance from combustible materials.
- Moisture: Do not use this heater in wet or moist locations, such as bathrooms, unless specifically rated for such environments.
- Maintenance: Disconnect power before performing any maintenance or cleaning.
2. Product Overview
The Kolasina Fan-Forced Wall Heater is a compact, fan-forced electric heater designed for efficient heating in small spaces. It features a built-in thermostat and flexible voltage adaptation.
3. Setup and Installation
Installation of this heater requires electrical wiring. It is strongly recommended that installation be performed by a qualified electrician to ensure compliance with all applicable electrical codes and safety standards.
3.1 Mounting Location
- Choose a location that allows for proper air circulation and is free from obstructions.
- Ensure the mounting surface is stable and can support the weight of the heater.
- Maintain minimum clearances from walls, floors, and any combustible materials as specified in local codes.
3.2 Electrical Wiring and Voltage Adaptation
The heater is factory-wired for 240VAC/1500W (compatible with 208VAC/1125W). It can be converted to 120VAC/750W or 120VAC/1500W by changing the internal wiring. Refer to the wiring diagram provided with the product for detailed instructions on voltage conversion.
Important: Do not connect directly to 120V voltage if the heater is configured for 240/208V. Always switch to the correct wiring method for 120V voltage before connecting power.
4. Operating Instructions
4.1 Thermostat Operation
The heater features a built-in thermostat to maintain your desired comfort level. The thermostat dial is located on the front panel of the unit.
- Turning On: Rotate the thermostat dial clockwise from the "LOW" position. The heater will activate when the ambient temperature falls below the set temperature.
- Adjusting Temperature: Turn the dial clockwise to increase the desired temperature setting (towards "HIGH") or counter-clockwise to decrease it (towards "LOW").
- Turning Off: Rotate the thermostat dial counter-clockwise until it reaches the "LOW" position and the heater deactivates. For complete power disconnection, turn off the circuit breaker supplying power to the heater.
4.2 Quiet Operation
The lateral airflow design of the fan ensures even and quiet air movement, contributing to a tranquil environment.
5. Maintenance
Regular maintenance helps ensure the efficient and safe operation of your heater. Always disconnect power to the unit at the circuit breaker before performing any maintenance.
- Cleaning: Periodically clean the exterior of the heater with a soft, damp cloth. Do not use abrasive cleaners or solvents. Ensure the air intake and output grilles are free from dust and debris.
- Inspection: Annually inspect the heater for any signs of damage, loose connections, or unusual wear. If any issues are found, contact a qualified service technician.
- Do not attempt to service the internal components of the heater yourself. Refer all servicing to qualified personnel.
6. Troubleshooting
If your heater is not operating correctly, consult the following troubleshooting guide. If the problem persists, contact customer support.
| Problem | Possible Cause | Solution |
|---|---|---|
| Heater does not turn on. | No power supply. Thermostat set too low. Overheat protection activated. | Check circuit breaker. Increase thermostat setting. Allow heater to cool; check for obstructions. |
| Heater produces insufficient heat. | Thermostat set too low. Incorrect voltage wiring. Heater size inadequate for space. | Increase thermostat setting. Verify wiring configuration (refer to Section 3.2). Ensure heater is appropriate for the room size (covers 150 sq ft). |
| Heater cycles on and off frequently. | Thermostat setting too close to ambient temperature. Overheat protection activating. | Adjust thermostat setting. Check for obstructions around the heater; ensure proper ventilation. |
| Unusual noise during operation. | Loose components or debris in fan. | Disconnect power and inspect for obstructions. If noise persists, contact support. |
7. Specifications
- Brand: Kolasina
- Model: Fan-Forced Wall Heater
- Product Dimensions: 22 x 18 x 6.2 inches
- Item Weight: 14.32 pounds
- Voltage/Wattage (Factory Wired): 240VAC/1500W (compatible with 208VAC/1125W)
- Convertible Voltage/Wattage: 120VAC/750W, 120VAC/1500W
- Heating Area Coverage: Up to 150 square feet
- Features: Built-in thermostat, dual-protection safety (high-temperature alarm, auto power-off), lateral fan airflow design.
8. Warranty and Support
8.1 Warranty Information
This Kolasina product comes with a 2-year warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from improper installation, misuse, abuse, accident, or unauthorized repairs.
8.2 Customer Support
For technical assistance, warranty claims, or any questions regarding your Kolasina Kickspace Heater, please contact our customer support team:
- Email: support@kolasina.com
- Phone: 1-800-XXX-XXXX (Monday - Friday, 9 AM - 5 PM EST)
- Website: www.kolasina.com/support
Please have your model number and purchase date available when contacting support.