WantJoin Blender for Smoothies User Manual

1. Important Safeguards

Please read all instructions carefully before using your WantJoin Blender. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Always ensure the blender is unplugged before assembling, disassembling, or cleaning.
• Do not immerse the motor base in water or other liquids.
• Keep hands and utensils out of the container while blending to reduce the risk of severe injury to persons or damage to the blender. A scraper may be used but only when the blender is not running.
• Blades are sharp. Handle with care.
• Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or has been dropped or damaged in any manner.
• Close supervision is necessary when any appliance is used by or near children.
• Do not use outdoors.
• Do not let the cord hang over the edge of a table or counter, or touch hot surfaces.
• Always operate the blender with the lid securely in place.
• Do not blend hot liquids that exceed the maximum fill line.

2. Product Overview

The WantJoin Professional Blender is designed for efficient blending, crushing, and puréeing tasks in both home and commercial settings. It features a powerful motor, durable construction, and a compact design.

2.1 Components

• Motor Base (with control panel)
• 68oz (2L) Pitcher with Lid
• Tamper
• Blender Recipe Guide (if included)

2.2 Key Features

• Powerful Motor: 1800W copper motor with 30,000 RPM for efficient blending.
• Durable Blades: 6-leaf 3D stainless steel blade system (SUS304).
• Large Capacity: 68oz (2L) pitcher, suitable for up to 8 servings.
• Compact Design: Shorter pitcher height for easy storage under cabinets.
• Multiple Speeds: 9 speed settings and a pulse function for versatile blending.
• Safety Features: Overheat protection and anti-vibration base.
• Easy Cleaning: Dishwasher-safe pitcher and self-cleaning function.

2.3 Product Diagram and Dimensions

Refer to the image below for an overview of the blender's components and dimensions.

Figure 1: WantJoin Blender main unit with pitcher and tamper. The image illustrates the blender's capability to crush ice for smoothies and icy desserts.

Figure 2: Detailed dimensions of the WantJoin Blender, including the motor base (9.37"D x 8.22"W x 18.1"H), pitcher, lid, and tamper.

Figure 3: Internal view of the blender's 1800W pure copper motor and blade assembly, highlighting overheat protection and durability.

3. Setup

1. Unpack: Carefully remove all components from the packaging. Retain packaging for future storage or transport.
2. Initial Cleaning: Before first use, wash the pitcher, lid, and tamper in warm, soapy water. Rinse thoroughly and dry. The motor base can be wiped with a damp cloth.
3. Assemble: Place the pitcher securely onto the motor base. Ensure it is properly seated.
4. Position: Place the blender on a clean, dry, and stable surface.
5. Power Connection: Plug the power cord into a grounded electrical outlet (110V).

4. Operating Instructions

The WantJoin Blender offers intuitive controls for various blending tasks.

4.1 Control Panel Overview

Figure 4: The blender's control panel, featuring an LED display, speed knob, and dedicated buttons for various functions including Pulse.

• LED Display: Shows time or speed settings.
• Speed Knob: Adjusts blending speed (9 settings).
• Pulse Button: Provides short bursts of high-speed blending for chopping or quick mixing.
• Pre-set Functions: Dedicated buttons for specific tasks like ICE CRUSH, JUICE, SAUCE, SOUP, etc.

4.2 Blending Process

1. Prepare Ingredients: Cut ingredients into appropriate sizes. For best results, add liquids first, then soft ingredients, followed by hard ingredients and ice. Do not exceed the maximum fill line on the pitcher.
2. Secure Lid: Place the lid firmly on the pitcher. Ensure the lid plug is also in place.
3. Select Function/Speed:
   • For pre-set functions (e.g., ICE CRUSH, JUICE), press the corresponding button.
   • For manual control, turn the speed knob to your desired setting (1-9).
   • For short bursts, press and hold the Pulse button. Release to stop.
4. Start Blending: Press the Start button (if applicable, or the selected function button will initiate blending).
5. Use Tamper (if needed): If ingredients get stuck, remove the lid plug and use the tamper to push ingredients towards the blades. Never use fingers or other utensils.
6. Stop Blending: Press the Stop button or turn the speed knob to 'OFF'.
7. Serve: Carefully remove the lid and pour out the contents.

4.3 Adding Ingredients During Blending

The blender features a feeding lid design, allowing you to add ingredients while blending.

Figure 5: The feeding lid design, which allows for adding ingredients through the lid plug opening during operation.

To add ingredients during blending, simply remove the lid plug and carefully drop in additional items. Replace the lid plug immediately after adding ingredients.

4.4 Blending Capacity

Figure 6: The 68oz (2L) pitcher, demonstrating its capacity to prepare multiple servings, suitable for large families or commercial use.

The 68oz (2L) pitcher can prepare up to 8 servings of juice or smoothies at once, making it suitable for both home and commercial use.

5. Maintenance and Cleaning

Regular cleaning ensures optimal performance and extends the life of your blender.

5.1 Self-Cleaning Function

Figure 7: Illustration of the blender's self-cleaning function (using the Pulse button) and its dishwasher-safe pitcher.

1. After use, rinse the pitcher.
2. Fill the pitcher halfway with warm water and add a few drops of dish soap.
3. Secure the lid.
4. Press the Pulse button for 30-60 seconds, or run on a medium speed until clean.
5. Rinse the pitcher thoroughly with clean water.

5.2 Manual Cleaning

• Pitcher, Lid, and Tamper: These components are dishwasher safe. Alternatively, wash by hand with warm, soapy water and a non-abrasive sponge. Handle blades with extreme caution.
• Motor Base: Wipe the motor base with a damp cloth. Do not immerse in water. Ensure it is unplugged before cleaning.
• Drying: Ensure all parts are completely dry before reassembling or storing.

6. Troubleshooting

7. Specifications

• Brand: WantJoin
• Model: Professional Blender
• Power: 1800W
• Motor Type: Upgraded 9850 model all-copper motor
• RPM: 30,000
• Speeds: 9 (plus Pulse function)
• Pitcher Capacity: 68oz (2 Liters)
• Blade Material: SUS304 Stainless Steel (6-leaf 3D)
• Material Type Free: BPA Free
• Voltage: 110V
• Product Dimensions: 9.37"D x 8.22"W x 18.1"H
• Item Weight: 8.4 pounds
• Color: Silver
• UPC: 762744156961

8. Warranty and Support

The WantJoin Blender comes with a 10-year warranty on the motor base, reflecting its heavy-duty build and tested durability.

For any assistance, questions, or warranty claims, please contact WantJoin customer service. Refer to your purchase documentation for specific contact details or visit the official WantJoin website.

We are committed to providing one-on-one customer service to ensure your satisfaction.