iTouchless 13 Gallon Automatic Sensor Trash Can (Model SPOS13B-1-N1) Instruction Manual

Introduction

This manual provides detailed instructions for the setup, operation, and maintenance of your iTouchless 13 Gallon Automatic Sensor Trash Can, Model SPOS13B-1-N1. Please read this manual thoroughly before using the product to ensure proper function and longevity.

Product Overview

The iTouchless 13 Gallon Automatic Sensor Trash Can features Sensor 2.0 Technology for touchless operation, an AbsorbX Odor Filter for odor control, and a slim, space-saving design. It is powered by either D batteries or an optional AC adapter.

Figure 1: Front view of the iTouchless 13 Gallon Automatic Sensor Trash Can.

Figure 2: Product dimensions for optimal placement.

What's in the Box

• Trash Can Body
• Lid with Sensor 2.0 Technology
• AbsorbX Odor Filter

Setup

1. Power Installation (Batteries or AC Adapter)

Your trash can can be powered by 4 D-size batteries (not included) or an optional AC adapter (sold separately).

1. Locate the battery compartment on the underside of the lid.
2. Insert 4 D-size batteries, ensuring correct polarity.
3. Alternatively, if using the AC adapter, plug it into the designated port on the back of the lid and then into a wall outlet.

Figure 3: Power options: 4 D-size batteries or optional AC adapter.

2. Odor Filter Installation

The AbsorbX Odor Filter helps neutralize odors. A filter is included with your purchase.

1. Open the lid of the trash can.
2. Locate the filter compartment on the underside of the lid.
3. Insert the AbsorbX Odor Filter into the designated holder.
4. Close the filter compartment securely.

Figure 4: AbsorbX Odor Filter system for neutralizing smells.

3. Trash Bag Installation

To install a trash bag:

1. Remove the lid from the trash can body.
2. Place a standard 13-gallon trash bag into the can, ensuring the top edge of the bag is folded over the rim.
3. Secure the trash bag by placing the lid back onto the can, ensuring the bag is tucked neatly under the lid's rim.

Operating Instructions

1. Motion Sensor Operation

The Sensor 2.0 Technology provides reliable, touch-free operation.

• To open the lid: Wave your hand approximately 6 inches above the sensor. The lid will open automatically.
• To close the lid: The lid will close automatically after a few seconds of inactivity.
• Stay-Open Lid: The lid is designed to stay open while you are nearby, preventing premature closing during use.

Figure 5: Activating the motion sensor for touchless lid opening.

2. Manual Operation

For extended open times or manual control, use the buttons on the lid.

• OPEN button: Press the "OPEN" button to keep the lid open indefinitely.
• CLOSE button: Press the "CLOSE" button to close the lid when it is in the manual open state.

Maintenance

1. Odor Filter Replacement

The AbsorbX Odor Filter should be replaced periodically to maintain optimal odor control. Sign up for free text message reminders for replacement.

• Replace the filter every 3 months, or sooner depending on usage and odor levels.
• To replace, open the lid, remove the old filter from its holder, and insert a new AbsorbX Odor Filter.

Figure 6: Free text messaging reminder for filter replacement.

2. Cleaning Instructions

To clean the trash can:

• Wipe the exterior with a soft, damp cloth and mild detergent. Avoid abrasive cleaners.
• For the interior, remove the trash bag and wipe down with a damp cloth. Ensure the interior is dry before replacing the bag.
• Do not submerge the lid in water, as this can damage the electronic components.

Troubleshooting

Specifications

Warranty & Support

For questions, parts, or warranty information, please visit the official iTouchless website or contact customer support.

Online Support: itouchless.com/SPO13

Please retain your proof of purchase for any warranty claims.