FDCTR M01

FDCTR Remote Control Stunt Car M01 User Manual

Model: M01 | Brand: FDCTR

Introduction

This manual provides comprehensive instructions for the safe and effective operation and maintenance of your FDCTR Remote Control Stunt Car M01. Please read this manual thoroughly before first use and retain it for future reference.

The FDCTR Remote Control Stunt Car M01 in green, with its remote control and modular batteries. — Image: The FDCTR Remote Control Stunt Car M01 in green, showcasing its design and included remote control.

Safety Information

Age Recommendation: Suitable for users aged 6-12 years. Adult supervision is recommended for younger children.
Battery Safety: Use only specified batteries and charging methods. Do not mix old and new batteries, or different types of batteries. Dispose of batteries responsibly.
Operating Environment: Avoid operating the car near water, heat sources, or electrical outlets. Ensure a clear play area free from obstacles and hazards.
Impact Avoidance: While durable, excessive force or high-impact collisions can damage the product.
Choking Hazard: Small parts may be present. Keep away from young children to prevent choking.

What's Included

The FDCTR Remote Control Stunt Car M01 package contains the following items:

1x FDCTR Remote Control Stunt Car (Green)
1x Remote Control (requires 2x AA batteries, included)
2x 600mAh (3.7V) Modular Batteries (1 pre-installed)
1x USB-C Charging Cable
1x Screwdriver
2x Spare Screws
1x Product Manual

Contents of the FDCTR Remote Control Stunt Car M01 box, including the green car, remote, batteries, USB-C cable, screwdriver, and manual. — Image: All items included in the product package.

Setup Guide

1. Charging the Modular Battery

Locate the modular battery compartment on the underside of the stunt car.
Press the release button and slide the modular battery out.
Connect the provided USB-C charging cable to the modular battery's USB-C port.
Plug the other end of the USB-C cable into a compatible USB power source (e.g., wall adapter, computer USB port).
The battery's indicator light will show charging status (refer to battery for specific light behavior). Charging typically takes approximately 1 hour for 60+ minutes of playtime.
Once fully charged, disconnect the cable and re-insert the modular battery into the car until it clicks securely into place.

Close-up image showing the USB-C modular battery being charged and inserted into the RC car. — Image: Modular battery charging via USB-C and installation process.

2. Remote Control Battery Installation

Use the provided screwdriver to open the battery compartment on the back of the remote control.
Insert 2x AA batteries (included), ensuring correct polarity (+/-).
Close the battery compartment and secure it with the screw.

3. Powering On and Pairing

Turn on the stunt car using the ON/OFF switch located on its underside. The car's lights will illuminate.
Turn on the remote control using its ON/OFF button. The indicator light on the remote will flash.
The remote and car will automatically pair. Once paired, the remote's indicator light will become solid.

Operating Instructions

Basic Controls

The remote control features two joysticks for precise movement:

Forward/Backward: Push both joysticks forward to move the car forward. Pull both joysticks backward to move the car backward.
Turning:
- To turn left: Push the right joystick forward and pull the left joystick backward.
- To turn right: Push the left joystick forward and pull the right joystick backward.
360° Spins: Push one joystick forward and the other backward simultaneously to perform a 360° spin.

Two children playing with FDCTR Remote Control Stunt Cars, demonstrating the 2.4GHz anti-interference feature. — Image: Multiple cars can be operated simultaneously without signal interference.

Stunt Features

Double-Sided Driving: The car is designed to drive on both sides. If it flips over, simply continue driving.
360° Flips: Experiment with different control combinations to achieve impressive flips and rolls.

A young boy operating the FDCTR Remote Control Stunt Car outdoors, performing a 360-degree flip stunt. — Image: Demonstrating a 360° flip stunt with the RC car.

Light Control

Press the "LIGHT" button on the remote control to toggle the car's automatic color-changing RGB headlights and wheel lights ON or OFF.

All-Terrain Performance

The FDCTR Stunt Car is equipped with high-traction tires and a shockproof ABS shell, allowing it to operate on various surfaces:

Hardwood floors
Carpet
Grass
Gravel
Mulch

Collage of the FDCTR Remote Control Stunt Car operating on various terrains: floor, grass, and road. — Image: The stunt car demonstrating its all-terrain capabilities.

Video: Demonstration of the FDCTR Remote Control Stunt Car's features, including its modular battery and various movements.

This official product video showcases the FDCTR Stunt Car in action, demonstrating its double-sided driving, 360-degree rotations, and the ease of swapping its modular battery. It provides a visual guide to the car's dynamic capabilities and user-friendly design.

Maintenance

Cleaning: Use a soft, dry cloth to wipe down the car and remote control. Avoid using water or chemical cleaners.
Battery Storage: If storing the car for an extended period, remove all batteries from both the car and the remote control. Store batteries in a cool, dry place.
Inspection: Regularly inspect the wheels, axles, and body for any signs of damage or wear.

Troubleshooting

Problem	Possible Cause	Solution
Car does not respond to remote.	Low battery in car or remote; not paired; car/remote off.	Charge car battery; replace remote batteries; ensure both are ON and paired.
Short control range or interference.	Obstacles between remote and car; other 2.4GHz devices nearby.	Operate in an open area; move away from other wireless devices.
Car moves slowly or lights are dim.	Low car battery.	Recharge the modular battery.
Car gets stuck frequently.	Operating on overly rough or soft terrain.	Move to a more suitable surface. The car is designed for various terrains but extreme conditions may impede movement.

Specifications

Feature	Detail
Product Dimensions	6.1 x 6.1 x 2.5 inches
Item Weight	1.08 pounds
Item Model Number	M01
Manufacturer Recommended Age	6 - 12 years
Car Battery	2x 3.7V 600mAh Modular Batteries (USB-C rechargeable)
Remote Control Batteries	2x AA batteries (included)
Control Frequency	2.4GHz (Anti-interference)
Special Features	Double-sided driving, 360° flips, RGB headlights and wheel lights, all-terrain tires.

Warranty and Support

For any questions, concerns, or support needs regarding your FDCTR Remote Control Stunt Car M01, please contact the manufacturer directly. Refer to the product packaging or the official FDCTR website for contact information and details on warranty coverage.

The manufacturer, FDCTR, is committed to providing responsive customer support. Please message them anytime if you require assistance.

Related Documents - M01

	M01 Smart Glasses User Manual User manual for the M01 Smart Glasses, detailing features, connection instructions, and precautions.
	M01 Smart Glasses User Manual - Features, Connection, and Safety User manual for the M01 Smart Glasses, covering setup, features, connection instructions, and important precautions.
	M01 Device Technical Specifications: JL7018F Chip, Bluetooth, 2.4GHz WiFi Detailed technical specifications for the M01 device, featuring the JL7018F chip, GC05A2 camera, 2.4GHz WiFi, Bluetooth connectivity, battery life, and performance metrics.
	Shishi Wenhan Smart Watch A03 User Manual and Specifications User manual for the Shishi Wenhan Smart Watch A03. This guide covers essential information including charging, connecting to your smartphone via the H Band app, navigating watch functions (activity tracking, sleep monitoring, heart rate, blood pressure, blood oxygen, stress, etc.), troubleshooting common issues, and warranty details. It also includes FCC compliance statements.
	EM Full Series Mouse Instruction Manual - Setup, Requirements, and Compliance Instruction manual for the EM Full Series Mouse, covering 2.4GHz wireless and USB connection methods, system requirements, cleaning instructions, and FCC compliance information.
	Forward and Reverse Remote Control Switch - Specifications and Operation Technical specifications, operating modes, pairing instructions, and FCC compliance statement for the Dongguan Feijiang Electronic Technology Co., Ltd. WJZH-M01 forward and reverse remote control switch.