1. Introduction
Thank you for choosing the OKPRO 5000W Solar Street Light. This manual provides essential information for the proper installation, operation, and maintenance of your solar light. Please read it thoroughly before use and retain it for future reference.
This solar street light is designed for outdoor use, featuring a wide-angle illumination, motion sensing capabilities, and remote control for various lighting modes. It is an energy-efficient and waterproof solution for illuminating roads, driveways, yards, and other outdoor spaces.
2. Safety Information
- Always handle the solar panel and light fixture with care to avoid damage.
- Ensure the installation location is stable and can support the weight of the light fixture.
- Do not attempt to disassemble or modify the product, as this may void the warranty and pose safety risks.
- Keep the solar panel clean to ensure optimal charging efficiency.
- Avoid direct eye exposure to the LED light when it is active, as it is very bright.
- Dispose of the product and its components according to local environmental regulations at the end of its lifespan.
3. What's in the Box
The package includes the following components:
- Solar Lights (Quantity: 2)
- Remote Controls
- Mounting Hardware
- Mounting Brackets
- User Manual
Figure 3.1: Included components of the OKPRO 5000W Solar Street Light.
4. Setup and Installation
The OKPRO 5000W Solar Street Light offers flexible installation options, including wall mount and pole mount. No wiring or trenching is required.
4.1 Pre-Installation Steps
- Before first use, charge the solar panel for 8-12 hours in direct sunlight to ensure the battery is sufficiently charged for normal operation.
- Select an installation location where the solar panel will receive direct sunlight for the majority of the day. Avoid areas with obstructions like buildings or trees that could reduce charging efficiency.
- Test the light by pressing the ON/OFF switch on the unit to confirm functionality before final installation.
4.2 Mounting Options
The light can be mounted on walls or poles (2.3-3.9 inches in diameter). The recommended installation height ranges from 6.5 to 9.8 feet.
Figure 4.1: Wall-mounted and pole-mounted installation examples.
4.3 Installation Procedure
- Attach the mounting bracket to the light fixture using the provided hardware.
- For wall mounting: Drill two holes in the desired wall location. Secure the assembled light body and bracket to the wall using the provided screws and nuts.
- For pole mounting: Insert the mounting pole into the bracket on the light fixture. Secure the light to a pole (2.3-3.9 inches in diameter) using the provided U-shaped bolts and nuts.
- Ensure all connections are tightened securely.
Video 4.1: This video demonstrates the unboxing, components, and installation process for the OKPRO Solar Street Light, including how to attach the light to a pole.
5. Operating Instructions
The OKPRO 5000W Solar Street Light features multiple operating modes controlled via the included remote control.
5.1 Remote Control Functions
- ON/OFF: Turns the light on or off.
- Dusk to Dawn (Auto): The light automatically turns on at dusk and off at dawn.
- Motion Sensor Mode 1: The light operates at 30% brightness. When motion is detected, it switches to 100% brightness. After motion ceases, it returns to 30% brightness.
- Motion Sensor Mode 2: The light remains off. When motion is detected, it switches to 100% brightness. After motion ceases, it turns off completely.
- Brightness Adjust: Adjusts the light intensity to 50% or 100% (available in certain modes).
- Timer: Sets the light to operate for a specific duration (1-5 hours) before turning off.
- Reset: Resets the light to default settings.
Figure 5.1: Motion Sensor Mode operation.
Figure 5.2: Dusk to Dawn operation.
5.2 Solar Charging
The integrated A-grade polycrystalline solar panel has over 25% conversion rate. It charges in 5-6 hours for all-night illumination, even providing 6-8 hours of light on cloudy days.
Figure 5.3: Premium A-grade polycrystalline solar panel.
6. Maintenance
Regular maintenance ensures optimal performance and longevity of your solar street light.
- Cleaning the Solar Panel: Periodically wipe the solar panel with a soft, damp cloth to remove dust, dirt, or debris that may accumulate and reduce charging efficiency. Do not use abrasive cleaners.
- Checking Connections: Annually inspect all mounting hardware and connections to ensure they remain tight and secure.
- Battery Care: The internal battery is designed for long-term use. Avoid prolonged storage of the light in a completely discharged state.
- Environmental Protection: The light is IP66 waterproof, designed to resist heavy rain, snow, and dust. No special weather-related maintenance is typically required beyond ensuring the solar panel is clear of snow or ice in winter.
Figure 6.1: IP66 Waterproof design.
7. Troubleshooting
If you encounter issues with your OKPRO Solar Street Light, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on at night. | Insufficient solar charge; ON/OFF switch is off; sensor malfunction. | Ensure the solar panel is in direct sunlight for 8-12 hours. Check if the ON/OFF switch on the light is pressed. Verify remote control settings. |
| Light is dim or only stays on for a short period. | Solar panel is dirty or obstructed; insufficient sunlight; battery degradation. | Clean the solar panel. Relocate the light to an area with more direct sunlight. If the issue persists after prolonged use, the battery may need replacement (contact support). |
| Remote control is not working. | Remote battery is dead; remote not paired; obstruction between remote and light. | Replace remote control batteries. Ensure there are no obstructions. Try resetting the light using the reset button on the remote. |
| Motion sensor is not detecting movement. | Sensor is obstructed; incorrect mode selected; sensor range issues. | Clear any obstructions from the sensor. Ensure Motion Sensor Mode 1 or 2 is selected. Adjust the light's position to optimize sensor coverage. |
8. Specifications
| Feature | Detail |
|---|---|
| Brand Name | OKPRO |
| Model Number | O-GBK-2 |
| Wattage | 5000 watts |
| Light Source Type | LED (3535 LED beads, 6500K) |
| Illumination Coverage | 800-900 sq.ft. (240° wide-angle design) |
| Power Source | Solar Powered (A-grade polycrystalline panel, >25% conversion rate) |
| Charging Time | 5-6 hours (for all-night illumination) |
| Control Method | Remote Control |
| Additional Features | Energy Efficient, Motion Sensor, Timer, Waterproof |
| Water Resistance Level | IP66 Waterproof |
| Mounting Type | Wall Mount, Pole Mount |
| Installation Height | 6.5 to 9.8 feet |
| Product Dimensions | 40"D x 30"W x 30"H |
| Material Type | Acrylonitrile Butadiene Styrene |
| Color | Black |
| Certifications | FCC/CE/RoHS certified |
9. Warranty and Support
The OKPRO 5000W Solar Street Light comes with a 24-month warranty. All products are quality-checked before shipping.
For any questions, concerns, or support needs, please contact our dedicated customer service team. We offer 24-hour service via Amazon messages, ensuring a real-person response to assist you.