Perfit Liner CV-SB-WB242439-C0036-6.5

Perfit Liner 6.5-inch Two-Stair Running Boards Instruction Manual

For 2015-2025 Chevy Colorado / GMC Canyon Crew Cab (4 Full Size Doors)

1. Introduction

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Perfit Liner 6.5-inch Two-Stair Running Boards. Please read this manual thoroughly before installation and use to ensure proper function and safety. These running boards are designed to enhance vehicle accessibility and provide exterior protection.

2. Compatibility

These Perfit Liner Running Boards are specifically designed for:

  • 2015-2025 Chevy Colorado Crew Cab (4 Full Size Doors)
  • 2015-2025 GMC Canyon Crew Cab (4 Full Size Doors)

Note: Not compatible with Diesel Models equipped with a DEF Tank. Not compatible with Standard/Regular Cab (2 Full-Size Doors Only) or EXT/Double Cab (2 Full-Size Doors & 2 Half-Size Rear Doors).

Vehicle Compatibility Chart for Perfit Liner Running Boards

Image 2.1: Visual guide illustrating compatible vehicle types (Crew Cab) and incompatible types (Standard/Regular Cab, EXT/Double Cab) for the running boards.

3. Package Contents

Upon opening the package, please verify that all components are present and undamaged:

  • 2 x Perfit Liner Running Boards (Left and Right)
  • Mounting Brackets (specific to vehicle model)
  • All Necessary Hardware (e.g., Flat Washers, Hexagon Nuts, Spring Washers, Double T Bolts, Clip Nuts, Hexagon Flange Bolts)
  • Installation Instruction Manual
Product dimensions and included hardware for Perfit Liner Running Boards

Image 3.1: Diagram showing product dimensions and a selection of typical hardware components included in the package.

4. Installation (Setup)

The Perfit Liner Running Boards are designed for a straightforward bolt-on installation process, typically requiring no drilling or cutting. Installation can usually be completed in approximately 30 minutes.

4.1. Pre-Installation Checklist

  • Ensure your vehicle is parked on a level surface and the engine is off.
  • Gather all tools required (e.g., wrenches, sockets).
  • Confirm all package contents are present and undamaged.
  • Review the included installation instruction manual thoroughly.

4.2. Installation Steps

  1. Identify the mounting points on your vehicle's frame. These are typically pre-drilled holes.
  2. Attach the mounting brackets to the vehicle frame using the provided hardware. Do not fully tighten bolts at this stage.
  3. Carefully position the running board onto the attached brackets.
  4. Secure the running board to the brackets using the remaining hardware.
  5. Adjust the running board for optimal alignment and then fully tighten all bolts to the manufacturer's specifications.
  6. Repeat the process for the other side of the vehicle.

For detailed, step-by-step instructions with diagrams, please refer to the separate installation guide included in your package. Online video tutorials may also be available for visual assistance.

Perfit Liner 6.5-inch Two-Stair Running Boards, front and rear view

Image 4.1: An angled view of the two Perfit Liner running boards, showcasing their design and mounting points.

5. Features and Functionality

The Perfit Liner Running Boards are engineered with several key features to provide durability, safety, and convenience:

  • Enhanced Accessibility: The two-stair design offers an additional step, making entry and exit from your vehicle easier, particularly for children or elderly individuals.
  • Vehicle Protection: These running boards help shield your vehicle's exterior from road debris, scratches, and minor impacts.
  • Robust Construction: Manufactured from high-quality carbon steel, ensuring sturdiness and durability.
  • High Load Capacity: Designed to support up to 550 lbs (250 kg) without deformation.
  • Corrosion Resistance: Features a high-quality black powder coating and phosphating layer to prevent rust and corrosion.
  • Non-Slip Surface: Precision laser cutting and stamping techniques create a textured, non-slip step surface for improved traction.
  • Self-Cleaning Design: The hollow structure prevents water and sediment accumulation, contributing to a cleaner surface.
  • All-Weather Performance: Built to resist extreme temperatures, snow, mud, sand, and water.
Detailed view of Perfit Liner Running Board construction with anti-scratch coating and heavy-duty carbon steel

Image 5.1: Cutaway view highlighting the phosphating layer for rust prevention, anti-scratch black powder coating, and heavy-duty carbon steel construction.

Two people standing on Perfit Liner Running Boards, illustrating 550 lbs weight capacity

Image 5.2: Depiction of the running boards supporting two individuals, emphasizing the 550 lbs weight limit.

Perfit Liner Running Boards in various weather conditions: high temperature, rainstorm, muddy, low temperature

Image 5.3: Visual representation of the running boards' all-weather protection capabilities against diverse environmental elements.

6. Maintenance

To ensure the longevity and appearance of your Perfit Liner Running Boards, follow these simple maintenance guidelines:

  • Regular Cleaning: Wash the running boards regularly with mild soap and water to remove dirt, mud, and road salt. The hollow design helps prevent accumulation, but occasional cleaning is recommended.
  • Inspect Fasteners: Periodically check all mounting bolts and fasteners to ensure they remain tight. Re-tighten if necessary to prevent rattling or loosening.
  • Avoid Harsh Chemicals: Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the powder coating and finish.
  • Damage Inspection: Inspect the running boards for any signs of damage, such as deep scratches or dents, which could compromise the protective coating. Address any damage promptly to prevent rust.

7. Troubleshooting

If you encounter any issues with your Perfit Liner Running Boards, consider the following:

  • Loose or Rattling Boards: Check all mounting hardware. Ensure bolts are securely tightened.
  • Difficulty Stepping: Verify that the running boards are installed at the correct height and angle according to the installation manual.
  • Unusual Noises: Inspect for any loose components or contact points between the running board and the vehicle frame.

For issues not resolved by these steps, please contact Perfit Liner customer support for assistance.

8. Specifications

AttributeDetail
BrandPerfit Liner
ModelCV-SB-WB242439-C0036-6.5
MaterialAlloy Steel (Carbon Steel)
ColorBlack
Item Dimensions (L x W x H)83 x 6.5 x 4.9 inches
Item Weight70 pounds
Weight Limit550 Pounds
Automotive Fit TypeVehicle Specific Fit

9. Warranty and Support

Perfit Liner is committed to product quality and customer satisfaction.

  • Returns: This product is eligible for a 30-day easy return policy. Please refer to your purchase platform for specific return procedures.
  • Customer Support: For any questions, concerns, or assistance with installation or product functionality, please contact Perfit Liner customer support directly. Contact information can typically be found on the product packaging or the seller's storefront.

Related Documents - CV-SB-WB242439-C0036-6.5

PreviewSoft Roll Up Tonneau Cover User Manual for Toyota Tacoma | Perfit Liner
Comprehensive user manual for the Perfit Liner Soft Roll Up Tonneau Cover, detailing installation, cleaning, maintenance, and troubleshooting for 2016-2023 Toyota Tacoma models. Includes parts list and safety instructions.
PreviewPerfit Liner Soft Roll Up Tonneau Cover User Manual & Installation Guide
Comprehensive user manual and installation guide for the Perfit Liner Soft Roll Up Tonneau Cover, covering safety, parts list, step-by-step installation, cleaning, maintenance, and troubleshooting for Toyota Tundra models.
PreviewOEDRO 6 Inch Running Boards Installation Guide for Ford Ranger Crew Cab (2019-2026)
Step-by-step installation instructions for OEDRO 6-inch bolt-on running boards and nerf bars compatible with 2019-2026 Ford Ranger Crew Cab models. Includes part list and hardware details.
PreviewYITAMOTOR 6 Inches Running Boards Installation Guide for Nissan Frontier Crew Cab (2005-2025)
Installation guide for YITAMOTOR 6-inch aluminum black running boards designed for 2005-2025 Nissan Frontier Crew Cab models. Includes tools required, pre-installation checks, step-by-step instructions, and a parts list.
PreviewOEDRO 6 Inch Running Boards Installation Guide for Ram 1500 Crew Cab (2019-2026)
Detailed installation guide for OEDRO 6-inch running boards, compatible with 2019-2026 Ram 1500 Crew Cab models. Includes tools required, step-by-step instructions, and a comprehensive parts list for bolt-on nerf bars.
PreviewInstallation Guide: 6" Running Boards for 2024-2026 Toyota Tacoma | OETESS SKU6991
Detailed installation instructions for OETESS SKU6991 6-inch carbon steel running boards (side step rails/nerf bars) designed for 2024-2026 Toyota Tacoma Double/Crew Cab models. Includes part list and step-by-step guidance.