1. Important Safety Information
Please read and understand all instructions before beginning installation. Failure to follow these instructions may result in electric shock, fire, or other hazards that could cause injury or property damage.
- WARNING: Risk of electric shock. Disconnect power at the fuse or circuit breaker before installing or servicing.
- This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
- Use only 120V AC power supply.
- Ensure all electrical connections are secure and comply with local codes and ordinances.
- The fixture is ETL listed and wet rated for safe indoor and outdoor use.
- Do not attempt to modify the fixture. There are no user-serviceable parts inside.
2. Product Overview
The Edvivi Y00304-WH LED Step Light is a hardwired, low-profile lighting solution designed for illuminating steps, pathways, patios, and decks. It features integrated motion and photocell sensors for automatic operation.
Key Features:
- Dual Sensor Technology: Combines a PIR motion sensor and a dusk-to-dawn photocell for intelligent lighting control.
- PIR Motion Sensor: Detects motion within a 14ft range and 120° angle, activating the light. Automatically turns off after 1 minute of no motion.
- Dusk to Dawn Photocell: Prevents the light from activating during daylight hours, conserving energy. Activates the motion sensor function when ambient light levels are low.
- Integrated LED: Features a 3W, 3000K warm white LED with 100 lumens output. Designed for glare-free downlighting. No bulb replacement required.
- Durable Construction: Made of aluminum, ETL listed, and wet rated for reliable performance in various weather conditions.
Package Contents:
- Edvivi Y00304-WH LED Step Light (1 unit)
- Mounting Hardware
- Instruction Manual (this document)
Image: Front view of the Edvivi Y00304-WH LED Step Light, showing the integrated motion sensor and light output area.
3. Setup and Installation
This step light is designed for hardwired, flush-mount installation. Professional installation is recommended if you are not familiar with electrical wiring.
Tools Required (Not Included):
- Screwdriver (Phillips and/or Flathead)
- Wire Strippers
- Electrical Tape
- Wire Nuts (if not included with mounting hardware)
- Drill (if creating new mounting holes)
Installation Steps:
- Turn Off Power: Locate the circuit breaker or fuse box controlling the installation area and turn off the power. Verify power is off using a voltage tester.
- Prepare Mounting Location: This fixture is designed for flush mounting. Ensure there is adequate space within the wall or surface for the fixture's body (dimensions: 4.75"L x 1.5"W x 2.75"H, with a 1.5" depth from the wall). A standard single-gang junction box or similar opening is typically suitable.
- Connect Wiring:
- Connect the black wire from the fixture to the live (hot) wire from the power supply.
- Connect the white wire from the fixture to the neutral wire from the power supply.
- Connect the green wire from the fixture to the ground wire from the power supply.
Image: Rear view of the step light showing the hardwired connections (black, white, green wires) and the internal housing.
- Mount the Fixture: Carefully tuck the connected wires into the wall opening. Align the fixture with the mounting holes and secure it using the provided mounting hardware. Ensure the fixture is flush with the surface.
- Restore Power: Once the fixture is securely mounted, restore power at the circuit breaker or fuse box.
- Test Operation: Test the light's functionality as described in the "Operating Instructions" section.
Image: Multiple Edvivi LED Step Lights installed horizontally on concrete stairs, demonstrating typical application.
4. Operating Instructions
The Edvivi Y00304-WH LED Step Light operates automatically using its integrated PIR motion sensor and photocell.
Automatic Operation:
- Daytime: The built-in photocell detects sufficient ambient light. The light will remain OFF, and the motion sensor will be inactive to conserve energy.
- Dusk/Night: As ambient light levels decrease (at dusk or on cloudy days), the photocell activates the motion sensor.
- Motion Detection: When the motion sensor detects movement within its 14-foot range and 120-degree angle, the LED step light will turn ON immediately.
- Auto-Off: If no further motion is detected for approximately 1 minute, the light will automatically turn OFF.
No manual switching is required for this fixture. It is designed for "set it and forget it" convenience.
Image: The Edvivi LED Step Light illuminated, demonstrating its warm white downlight output.
5. Maintenance
The Edvivi Y00304-WH LED Step Light requires minimal maintenance due to its integrated LED design and durable construction.
- Cleaning: Periodically clean the fixture with a soft, damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or electronic components.
- No Bulb Replacement: The LED is integrated and designed for a 50,000-hour lifespan, eliminating the need for bulb replacement.
- Sensor Cleaning: Ensure the motion sensor and photocell lenses are kept clean and free of obstructions (dirt, dust, spiderwebs) to maintain optimal performance.
6. Troubleshooting
If your Edvivi LED Step Light is not functioning as expected, refer to the following common issues and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. |
|
|
| Light stays on continuously. |
|
|
| Light flickers or dims. |
|
|
If these solutions do not resolve the issue, please contact Edvivi customer support.
7. Specifications
| Feature | Detail |
|---|---|
| Model Number | Y00304-WH |
| Brand | Edvivi |
| Power Source | Hardwired, Corded Electric |
| Voltage | 120 Volts |
| Wattage | 3 Watts |
| Light Source | Integrated LED |
| Brightness | 100 Lumens |
| Color Temperature | 3000 Kelvin (Warm White) |
| Color Rendering Index (CRI) | 80 |
| Dimmable | No |
| Sensors | PIR Motion Sensor, Dusk-to-Dawn Photocell |
| Motion Detection Range | 14 ft, 120° angle |
| Auto-Off Delay | 1 minute (after no motion) |
| Material | Aluminum |
| Fixture Dimensions (L x W x H) | 4.75" x 1.5" x 2.75" |
| Depth from Wall | 1.5" |
| Indoor/Outdoor Usage | Indoor, Outdoor (Wet Rated) |
| Water Resistance Level | Waterproof |
| Certifications | ETL Listed |
| Lifespan | 50,000 hours |
Image: Diagram showing approximate dimensions of the Edvivi LED Step Light (2.75" H x 4.5" W).
8. Warranty and Support
This Edvivi LED Step Light is covered by a 1-year manufacturer's warranty from the date of purchase.
The warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by improper installation, accident, misuse, abuse, or unauthorized modifications.
For warranty claims, technical support, or any questions regarding your product, please contact Edvivi customer support through the retailer where the product was purchased or refer to the Edvivi official website for contact information.
