1. Safety Instructions
Please read all instructions carefully before assembly and use. Keep this manual for future reference.
- Ensure all components are present and undamaged before assembly.
- Keep children and pets away from the desk during operation to prevent injury.
- Do not overload the desk. The maximum recommended load capacity is 80 kg (176 lbs).
- Ensure all cables are properly managed and clear of moving parts to prevent pinching or damage.
- Unplug the desk from the power outlet before cleaning or performing any maintenance.
- Avoid spilling liquids directly onto the desk's electrical components or control panel.
- Do not attempt to modify or disassemble the motor or control system. Contact customer support for assistance.
- The desk features an anti-collision function. Ensure the path of movement is clear to prevent damage or injury.
2. Package Contents
Verify that all the following components are included in your package:
- Electric Desk Frame (Legs, Crossbars)
- Main Tabletop Section (100cm x 54cm)
- Corner Tabletop Section (40cm x 80cm)
- Control Panel with LED Display
- Power Adapter and Power Cable (200cm)
- 4 Fabric Drawers
- Cable Management Tray and Ties
- Assembly Hardware (Screws, Allen Wrenches)
- Instruction Manual
3. Setup and Assembly
Assembly of this desk is straightforward, but it is recommended to have two people for easier installation due to the size and weight of the components. Detailed assembly steps are provided in the included assembly guide.
3.1 General Assembly Steps
- Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent scratches.
- Assemble the Frame: Follow the detailed instructions in the separate assembly guide to connect the desk legs and crossbars.
- Attach Tabletop Sections: Secure the main and corner tabletop sections to the assembled frame using the provided hardware. Ensure proper alignment.
- Install Control Panel: Mount the control panel to the underside of the main tabletop in the designated area.
- Connect Power: Connect the motor cables to the control box and the power adapter. Plug the power adapter into a wall outlet.
- Insert Drawers: Place the fabric drawers into their respective slots under the desk.
- Cable Management: Utilize the included cable management tray and ties to organize power and device cables.
3.2 Reversible L-Shaped Configuration
The L-shaped corner section can be installed on either the left or right side of the main desk to suit your room layout and preference.
Image: Reversible L-shaped setup options.
4. Operating Instructions
4.1 Height Adjustment
The desk's height can be adjusted electrically from 76 cm (sitting height) to 117 cm (standing height) using the control panel. The operation is quiet and smooth, typically between 45-55dB.
Image: Desk height adjustment range.
- Up/Down Buttons: Use the ▲ (Up) and ▼ (Down) buttons on the control panel to manually adjust the desk to your desired height.
4.2 Memory Presets
The control panel allows you to save up to three preferred height settings for quick adjustment.
Image: Control panel with memory functions.
- To Set a Memory Preset: Adjust the desk to your desired height using the Up/Down buttons. Press the 'S' button, then press one of the number buttons (1, 2, or 3) until you hear a beep or see the display confirm.
- To Use a Memory Preset: Simply press the corresponding number button (1, 2, or 3) to automatically move the desk to the saved height.
4.3 Power Outlets and USB Charging
The desk features a built-in power strip with 2 AC outlets (120V/15A) and 2 USB ports (5V/2A) for convenient charging of your devices directly on the desktop.
Image: Integrated power and USB charging ports.
4.4 Cable Management
Keep your workspace tidy with the integrated cable management solutions, including an under-desk tray and magic tape ties.
Image: Hidden cable management tray.
4.5 Drawer Usage
The desk includes four large fabric drawers for organizing documents, stationery, and other office supplies, helping to maintain a clutter-free workspace.
Image: Fabric drawers for storage.
5. Maintenance
- Cleaning: Wipe the desk surface with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that could damage the finish.
- Check Connections: Periodically check all screws and connections to ensure they are tight and secure.
- Cable Inspection: Regularly inspect power cables and motor connections for any signs of wear or damage. Replace if necessary.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Desk does not move. | No power, loose cable connection, motor error. | Check if the power cable is securely plugged into the wall outlet and the desk. Ensure all motor cables are connected. Reset the desk by unplugging for 30 seconds and plugging back in. |
| Desk moves unevenly or makes unusual noise. | Uneven load, obstruction, loose components. | Distribute weight evenly on the desktop. Check for any obstructions in the lifting mechanism. Ensure all assembly screws are tightened. |
| Anti-collision feature activates frequently. | Obstruction in the desk's path. | Ensure there are no objects (e.g., chairs, cabinets, cables) in the desk's path when adjusting height. |
| Control panel display shows an error code. | System malfunction. | Refer to the specific error code in the full assembly manual (if provided) or contact AODK customer support. Try resetting the desk by unplugging it for 30 seconds. |
7. Specifications
- Brand: AODK
- Model Number: B03011OKT001004JP
- Type: Electric L-Shaped Standing Desk
- Color: White
- Dimensions (D x W x H): 80 cm x 140 cm x 76-117 cm
- Height Adjustment Range: 76 cm (Min) to 117 cm (Max)
- Maximum Load Capacity: 80 kg (176 lbs)
- Noise Level: 45-55 dB (during operation)
- Features: Electric Height Adjustment, 3 Memory Presets, Anti-Collision Function, Quiet Operation, 4 Fabric Drawers, Integrated Power Strip (2 AC outlets, 2 USB ports), Cable Management Tray.
- Power Outlets: 2 x AC 120V/15A
- USB Ports: 2 x USB 5V/2A
- Included Components: Large Drawers, AC Outlets, USB Ports, Cable Management Tray.
8. Warranty and Support
For warranty information, please refer to the documentation included with your purchase or contact AODK customer support. If you encounter any issues or have questions regarding your AODK Electric L-Shaped Standing Desk, please reach out to our support team for assistance.
You can find more information and contact details on the official AODK store page: AODK Store