OneOdio Pro 10 Wired Over-Ear Headphones with Boom Microphone User Manual

Introduction

This manual provides instructions for the proper use and maintenance of your OneOdio Pro 10 Wired Over-Ear Headphones with Boom Microphone. Please read this manual thoroughly before using the product to ensure optimal performance and longevity.

Package Contents

• OneOdio Pro 10 Over-Ear Headphones
• Detachable Boom Microphone
• 3.5mm to 3.5mm Audio Cable
• 3.5mm to 6.35mm Audio Cable
• 3.5mm Audio Splitter Cable (for PC with separate mic/audio jacks)
• Travel Pouch

Product Features

• Studio-Grade Sound Accuracy: Equipped with 50mm large-aperture drivers and Hi-Res audio certification, delivering a flat EQ response from deep 20Hz bass to crisp 40kHz highs for critical listening.
• Broadcast-Ready Boom Mic: Features a detachable cardioid microphone with noise-canceling technology, designed to isolate vocals and reduce ambient noise for clear communication.
• Universal Dual-Mode Compatibility: Connects via dual 3.5mm and 6.35mm cables, ensuring compatibility with a wide range of devices including PCs, Macs, gaming consoles (PS5, Xbox Series X/S), audio interfaces, and mobile devices.
• All-Day Studio Comfort: Designed with comfortable ear cushions and adjustable steel sliders to minimize fatigue during extended use. The foldable design enhances portability.

Image: The OneOdio Pro 10 headphones highlighting the noise-cancelling microphone feature with a visual representation of sound before and after noise reduction.

Image: A close-up of the OneOdio Pro 10 headphones demonstrating the wired connection mode with its patented anti-off jack design.

Setup Instructions

1. Connecting the Boom Microphone

Locate the microphone input port on the left earcup of the headphones. Align the connector of the boom microphone with the port and gently push until it clicks into place. Ensure the microphone is securely attached.

2. Connecting to Audio Devices

Using the 3.5mm Cable:

Insert one end of the 3.5mm audio cable into the 3.5mm port on the headphones. Insert the other end into the 3.5mm audio output jack of your device (e.g., smartphone, tablet, laptop, game controller).

Using the 6.35mm Cable:

For devices with a 6.35mm audio output (e.g., audio interfaces, mixers, amplifiers), use the provided 3.5mm to 6.35mm cable. Insert the 3.5mm end into the headphones and the 6.35mm end into your audio device.

Connecting to PC (with separate mic/audio jacks):

If your PC has separate input jacks for microphone and audio, use the included 3.5mm audio splitter. Connect the headphone's 3.5mm cable to the splitter, then connect the splitter's two plugs to the corresponding microphone and headphone jacks on your computer.

Image: A diagram illustrating the multi-platform compatibility of the OneOdio Pro 10 headphones, showing connections to PS4, mobile devices, Mac, Windows PC, and Xbox One S Controller, including the use of the 3.5mm audio connector.

Operating Instructions

Audio Playback

Once connected, ensure your audio device's volume is set to a comfortable level before placing the headphones on your head. Adjust the volume using your connected device's controls.

Using the Microphone

Position the boom microphone approximately 1-2 inches from your mouth for optimal voice capture. Ensure your device's microphone input is selected and its input volume is adjusted appropriately for clear communication.

Image: A man using the OneOdio Pro 10 headphones with the boom microphone attached, demonstrating its use for clearer calls with noise reduction.

Maintenance and Care

• Cleaning: Use a soft, dry cloth to wipe the headphones and earcups. Do not use liquid cleaners or solvents.
• Storage: When not in use, store the headphones in the provided travel pouch to protect them from dust and damage. The foldable design allows for compact storage.
• Cable Care: Avoid sharp bends or excessive pulling on the cables to prevent internal damage.
• Temperature: Do not expose the headphones to extreme temperatures or humidity.

Troubleshooting

No Sound or Low Volume

• Ensure all cables are securely connected to both the headphones and the audio source.
• Check the volume level on your audio device and ensure it is not muted.
• Verify that the correct audio output device is selected in your computer's sound settings.
• Test with a different audio cable or device to rule out cable or device issues.

Microphone Not Working

• Ensure the boom microphone is securely plugged into the headphone jack.
• Verify that the correct microphone input device is selected in your computer's or device's sound settings.
• Check the microphone input volume on your device.
• If using a PC splitter, ensure it is correctly connected to both the microphone and headphone jacks.

Specifications

Warranty and Support

OneOdio products come with a limited warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official OneOdio website. For technical support or customer service, please contact OneOdio directly through their official support channels.

Official OneOdio Website: www.oneodio.com