LUE BONA Counter Height Bar Stool Set of 3

LUE BONA Counter Height Bar Stool Set of 3 Instruction Manual

Model: Counter Height Bar Stool Set of 3

1. Introduction

Thank you for choosing the LUE BONA Counter Height Bar Stool Set of 3. This manual provides essential information for the safe assembly, operation, maintenance, and troubleshooting of your new bar stools. Please read these instructions carefully before assembly and retain them for future reference.

These modern bar stools feature a barrel backrest and armrest, linen upholstery, and black metal frames, designed for comfort and stability in kitchen island or bar settings.

2. Safety Information

  • Weight Capacity: Each bar stool has a maximum weight capacity of 350 lbs (approximately 158 kg). Do not exceed this limit to prevent damage or injury.
  • Assembly: Assemble the stools on a soft, clean surface to prevent scratches. Ensure all bolts and screws are securely tightened before use. Periodically check and re-tighten fasteners.
  • Stability: Do not stand on the stools. Avoid leaning excessively or using the stools on uneven surfaces to prevent tipping.
  • Children: Keep small parts away from children during assembly. Supervise children when they are near or using the stools.
  • Movement: Lift the stool when moving it; do not drag it, as this may damage the floor or the stool's frame.

3. Package Contents

Verify that all components are present before beginning assembly. If any parts are missing or damaged, please contact customer support.

  • 3 x Upholstered Seat with Barrel Backrest and Armrest
  • 3 x Metal Frame Base
  • 1 x Hardware Pack (screws, washers, Allen wrench)
  • 1 x Instruction Manual

4. Setup and Assembly Instructions

Follow these steps to assemble your LUE BONA Counter Height Bar Stools. It is recommended to have two people for easier assembly.

  1. Unpack Components: Carefully remove all parts from the packaging. Place them on a soft, clean, and flat surface to prevent damage.
  2. Attach Seat to Frame: Align the pre-drilled holes on the bottom of the upholstered seat with the holes on the top of the metal frame base.
  3. Secure with Hardware: Insert the provided screws with washers through the holes and tighten them using the Allen wrench. Do not overtighten initially; leave them slightly loose for minor adjustments.
  4. Final Tightening: Once all screws are in place and the stool is upright, gently rock the stool to ensure it sits evenly. Then, fully tighten all screws.
  5. Repeat for Remaining Stools: Follow the same steps for the other two bar stools.
Diagram showing the dimensions of the LUE BONA bar stool, including seat height, overall height, and width.
Figure 1: Bar Stool Dimensions. Overall height 32.5 inches, seat height 26.2 inches, seat width 16.9 inches.
Close-up view of the bar stool's barrel-shaped design, built-in footrest, and foot pads.
Figure 2: Design Features. Illustrates the barrel-shaped seat, built-in footrest, and protective foot pads.
Image highlighting the sturdy metal leg frame of the bar stool with icons for anti-collapse, anti-slip, and noiseless features.
Figure 3: Sturdy Leg Frame. Shows the robust metal construction designed for stability and durability.

5. Operating Instructions (Usage)

These bar stools are designed for comfortable seating at counter height surfaces.

  • Recommended Counter Height: The 27-inch seat height is suitable for counter tops ranging from 36 inches to 41 inches high.
  • Seating: Sit centrally on the stool. The barrel backrest and armrests provide ergonomic support for extended comfort.
  • Footrest: Utilize the built-in footrest for added comfort and to relax your legs.
  • Placement: For optimal comfort and ease of movement, allow approximately 6 inches of space between each bar stool when arranging them.
Image showing four bar stools arranged at a kitchen island, illustrating the recommended spacing between them.
Figure 4: Recommended Quantity and Spacing. Demonstrates appropriate spacing for multiple stools.

6. Maintenance and Care

Proper care will extend the life and appearance of your bar stools.

  • Linen Upholstery: For general cleaning, vacuum the linen fabric regularly using an upholstery attachment to remove dust and loose debris. For spills, blot immediately with a clean, dry cloth. For stubborn stains, consult a professional upholstery cleaner or use a mild fabric cleaner according to its instructions, testing on an inconspicuous area first.
  • Metal Frame: Wipe the metal frame with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals, as these can damage the finish. Dry thoroughly after cleaning.
  • Foot Pads: Periodically check the foot pads at the base of the frame to ensure they are intact and provide adequate floor protection. Replace if worn.
  • Fasteners: Regularly check all bolts and screws and re-tighten them as needed to maintain stability.
  • Sunlight Exposure: Avoid prolonged exposure to direct sunlight to prevent fading of the linen fabric.

7. Troubleshooting

If you encounter any issues with your bar stools, refer to the following common solutions:

ProblemPossible CauseSolution
Stool wobbles or is unstableLoose fasteners; uneven floor; uneven foot padsEnsure all screws are fully tightened. Adjust the leveling screws on the foot pads if present. Move the stool to a level surface.
Squeaking noiseLoose connections; friction between partsTighten all assembly screws. Apply a small amount of silicone lubricant to contact points if necessary.
Fabric appears stained or dirtySpills or accumulated dirtRefer to the "Maintenance and Care" section for cleaning instructions specific to linen upholstery.

If the issue persists after attempting these solutions, please contact LUE BONA customer service for further assistance.

8. Specifications

FeatureDetail
Product Dimensions (D x W x H)53.3 cm x 82.3 cm x 57.7 cm (21" D x 23" W x 33.5" H)
Seat Dimensions (D x W x H)17.5" D x 17.7" W x 12.5" H
Seat Height27 inches
Cushion Thickness6.2 inches
Suitable Counter Height36 to 41 inches
Weight Capacity350 lbs (158 kg)
Frame MaterialMetal
Seat Material TypeLinen
ColorLinen Color-black
Number of Pieces3
StyleModern

9. Warranty and Support

LUE BONA is committed to providing quality products and excellent customer service. Your product is covered by the standard manufacturer's warranty, details of which can be found on the LUE BONA official website or by contacting customer support.

If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please do not hesitate to contact the LUE BONA customer service team. They are available to provide professional after-sales support and will respond to inquiries within 24 hours.

Contact Information: Please refer to your purchase documentation or the LUE BONA official website for the most current customer service contact details.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.